Tetelot
-
Posts
3 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by Tetelot
-
-
Eso pasa porque el fabricante lo mandó mal.
El PTFE de por sí tiene una tolerancia para dejar pasar al filamento.
Si el mismo viene mal de fábrica es probable que se ensanche en algunos sectores. No por la máquina, sino porque vino mal. -
On 8/1/2019 at 6:14 AM, johnse said:
I have found the easiest way to move objects is by using the arrows. Move the mouse until the arrow becomes a lighter color and then click and drag. It doesn’t always seem like you’re clicking right on the arrow, but if it’s highlighted, it will work. Also works the same with rotation and scaling.
It doesn't work, sometimes you simply can't select the model, or the support blocker.
It happens since 4.0 and we are in 4.2 and still happening
Layers or supports missing (sometimes and in random places)
in UltiMaker Cura
Posted · Edited by Tetelot
Hi! First of all, excuse me by my bad english.
I'm a Cura user since 2018, and for about 6-8 months I saw this kind of bug in Cura.
The STL is fine, it doesn't have errors, but sometimes a layer is missing and it appears on the floor. If you move the model a little it fixes.
The same happens with the supports. It's like there is an imaginary grid on the floor so you have to move the model to fit in the grid.
It doesn't bother so much because I always watch the Layer view, but sometimes I'm in a rush and find the Printer doing supports mid air and it's a problem.
Thank you very much!
Esteban.
Edit: I'm not using the 4.8 because it changes the orientation of the models when arranging and I use the Seam in a XY coordinate. So I don't know if it is fixed.