Jump to content
Ultimaker Community of 3D Printing Experts

twmcelveen

Member
  • Content Count

    4
  • Joined

  • Last visited

Everything posted by twmcelveen

  1. Ok, printing through safe mode does NOT send the wrong temps. Think I should uninstall all the plugins and then reinstall them one by one?
  2. Hmm, you're right, I don't see it in the gcode file when I export it out of Cura? ;FLAVOR:Marlin ;TIME:49134 ;Filament used: 17.9428m ;Layer height: 0.1 ;MINX:21.415 ;MINY:36.828 ;MINZ:0.3 ;MAXX:178.589 ;MAXY:163.172 ;MAXZ:39.8 ;Generated with Cura_SteamEngine 4.3.0 M140 S65 M105 M190 S65 M104 S210 M105 M109 S210 M82 ;absolute extrusion mode G21 ;metric values G90 ;absolute positioning M82 ;set extruder to absolute mode G28 ; home all axes G29 ;bed levelling G1 Z0.2 F1200 ; raise nozzle G92 E0 ; reset extrusion distance G1 X10 ; mov
  3. For some reason I can't figure out, Cura is turning the extruder temp and bed temp to zero after bed leveling and during the first layer of my print. I tested by printing with a temp tower gcode from Thingiverse so as to bypass Cura and it printed fine. I'm sure it's not in my start code, I disabled almost all of it to double check. I pulled the code from terminal in Octoprint and it's throwing a M140 and M104 S0...but why? Recv: Bilinear Leveling Grid: Recv: 0 1 2 Recv: 0 -0.286 +0.141 +0.555 Recv: 1 -0.367 -0.003 +0.374 Recv: 2 -0.480 -0.132 +0.162 Re
×
×
  • Create New...