WCOkeefe
-
Posts
7 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by WCOkeefe
-
-
I asked and he doesn't remember which of the dozens of changes he made would have fixed the issue. Apparently I was doing a lot of things wrong, as expected of a newbie to 3d printing, using a printer that has very little documentation. One of the things he said was that I needed to be using "expert" mode so that I had access to all the settings instead of the few default ones.
-
I believe I got this one solved as well. Now I am having bed adhesion problems. My leveling tests have come out fine, but actual prints are having issues. Trying different brim/raft settings. It always fails in the same spots so I am thinking I am just a fraction off of a good level as well.
-
Issue fixed. I had a friend come in and show me what was happening. He corrected a setting (i don't remember which one now).
-
It is trying to move it in the direction of the tower. Makes a chattering noise once it reaches the belt stop and keeps trying to move towards the tower.
And thank you for replying.
-
i can successfully print a bed leveling test. i have successfully printed some stl files. any file i slice from an obj file fails to even start printing. some stl files fail to start, some start fine. i am using the same slicing settings.
help please.
-
New to 3d printing...
I currently have both the offset and layer start x and y set to 0.0
On every model at the end of the print the printer tries to put the nozzle into the tower, this also happens if I cancel a print job before it starts printing.
The models are centered on the plate just fine.
am i doing something wrong?
Monoprice mini v2 - initial x,y offset and layer start
in UltiMaker Cura
Posted
The other big change we made was getting a windows laptop connected to it instead of the Mac.