Sennris
-
Posts
10 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by Sennris
-
-
Ok so i just changed all those settings as well and i'm go to do a test print to see how the change affect the print.
-
Thankyou! I'll change those settings now and i re linked the file let me know if this one works.
-
Sure! Thankyou! here the 3mf File and a .stl also im sorry for late reply
-
oh! i'm sorry that's my bad that black is a black pen i ran over the top of the print where the issue where cause it was hard to see it with the straight white filament i'm sorry about that.
-
I use PLA and i have noticed any filament stuck to the nozzle and if the filament was burning wouldn't it have issue on the sides of the print as well?
-
Correct the area where the slicer shows gaps (always seems to be on the top of the model) is where issue happen on the print and I have a duplicator 6 and nozzle size 0.3.
-
the best way i can explain it is that the layers aren't fully forming! It happens with every model. I checked X-Ray vision, nothing is red, and I'm wondering how to fix it? and mesh check said it was all good.
-
The top layers don't seen to be printing right, there are gaps in the print right at the top layers by the sides seem to be perfectly fine.
-
Iv been trying to 3d print Minis for my DND group, but no matter what i try it seems like Cura generate the top layers of the print. I was wondering if anyone could see what setting could be changed in my profile that could help get a better outcome?
Cura Sliceing Model with gaps in the walls
in Improve your 3D prints
Posted
Hello everyone! When i slice a modelin Cura for some reason when you look at it in preview it started to have gaps in parts of the model. I use Cura 4.6 and my 3dprinter is a Monoprice Duplicator 6 (rebranded). I linked some screenshots of a few different parts that show the problem and also linked .3mf project file. Let me know if i can do anything else to help thank you!
Chest_Mimic_Toothy.3mf