I noticed the EngineErrorThread debug message here
2020-07-30 03:29:36,815 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [844]: Backend quit with return code 3221225477. Resetting process and socket.
2020-07-30 03:29:37,059 - INFO - [MainThread] UM.Backend.Backend._onSocketError [214]: Backend crashed or closed.
2020-07-30 03:29:37,061 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [227]: Previous socket existed. Closing that first.
2020-07-30 03:29:37,063 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [304]: Attempting to kill the engine process
2020-07-30 03:29:37,066 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [227]: Previous socket existed. Closing that first.
2020-07-30 03:29:37,070 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [184]: Socket state changed to Listening
2020-07-30 03:29:37,082 - INFO - [MainThread] UM.Backend.Backend.startEngine [86]: Started engine process: C:\Program Files\Ultimaker Cura 4.6\CuraEngine.exe
2020-07-30 03:29:37,085 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [106]: [Backend] Calling engine with: ['C:\\Program Files\\Ultimaker Cura 4.6\\CuraEngine.exe', 'connect', '127.0.0.1:49674', '']
2020-07-30 03:29:37,119 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend]
2020-07-30 03:29:37,121 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] Cura_SteamEngine version 4.6.2
2020-07-30 03:29:37,123 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] Copyright (C) 2019 Ultimaker
2020-07-30 03:29:37,125 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend]
2020-07-30 03:29:37,128 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] This program is free software: you can redistribute it and/or modify
2020-07-30 03:29:37,131 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [188]: Socket state changed to Connected
2020-07-30 03:29:37,133 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [177]: Backend connected on port 49674
2020-07-30 03:29:37,134 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-07-30 03:29:37,137 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-07-30 03:29:37,139 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] (at your option) any later version.
2020-07-30 03:29:37,141 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend]
2020-07-30 03:29:37,143 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] This program is distributed in the hope that it will be useful,
2020-07-30 03:29:37,145 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-07-30 03:29:37,147 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2020-07-30 03:29:37,149 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] GNU Affero General Public License for more details.
2020-07-30 03:29:37,151 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend]
2020-07-30 03:29:37,153 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-07-30 03:29:37,155 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] along with this program. If not, see <http://www.gnu.org/licenses/>.
-----------------------------------------------------------------------------------------------------------------------------------------
And the rest of the log file
2020-07-30 03:20:46,867 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin FileLogger
2020-07-30 03:20:46,897 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin FirmwareUpdateChecker
2020-07-30 03:20:46,914 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin FirmwareUpdater
2020-07-30 03:20:46,929 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeGzReader
2020-07-30 03:20:46,944 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeGzWriter
2020-07-30 03:20:46,962 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeProfileReader
2020-07-30 03:20:46,995 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeReader
2020-07-30 03:20:47,011 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeWriter
2020-07-30 03:20:47,035 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin ImageReader
2020-07-30 03:20:47,053 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin LegacyProfileReader
2020-07-30 03:20:47,068 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin LocalContainerProvider
2020-07-30 03:20:47,080 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin LocalFileOutputDevice
2020-07-30 03:20:47,105 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin MachineSettingsAction
2020-07-30 03:20:47,121 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin ModelChecker
2020-07-30 03:20:47,136 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin MonitorStage
2020-07-30 03:20:47,158 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PerObjectSettingsTool
2020-07-30 03:20:47,176 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PostProcessingPlugin
2020-07-30 03:20:47,191 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PrepareStage
2020-07-30 03:20:47,205 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PreviewStage
2020-07-30 03:20:47,230 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin RemovableDriveOutputDevice
2020-07-30 03:20:47,244 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SentryLogger
2020-07-30 03:20:47,283 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SimulationView
2020-07-30 03:20:47,304 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SliceInfoPlugin
2020-07-30 03:20:47,325 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SolidView
2020-07-30 03:20:47,344 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SupportEraser
2020-07-30 03:20:47,423 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace
2020-07-30 03:20:47,425 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None
2020-07-30 03:20:47,426 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace
2020-07-30 03:20:47,428 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None
2020-07-30 03:20:47,430 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace
2020-07-30 03:20:47,432 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None
2020-07-30 03:20:47,434 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace
2020-07-30 03:20:47,436 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None
2020-07-30 03:20:47,441 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin Toolbox
2020-07-30 03:20:47,457 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin CameraTool
2020-07-30 03:20:47,477 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin MirrorTool
2020-07-30 03:20:47,501 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin RotateTool
2020-07-30 03:20:47,524 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin ScaleTool
2020-07-30 03:20:47,539 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SelectionTool
2020-07-30 03:20:47,561 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin TranslateTool
2020-07-30 03:20:47,577 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin TrimeshReader
2020-07-30 03:20:47,597 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UFPReader
2020-07-30 03:20:47,618 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UFPWriter
2020-07-30 03:20:47,637 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UltimakerMachineActions
2020-07-30 03:20:47,882 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UM3NetworkPrinting
2020-07-30 03:20:47,907 - INFO - [Thread-1] UpdateChecker.UpdateCheckerJob.run [40]: Checking for new version of cura
2020-07-30 03:20:47,909 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UpdateChecker
2020-07-30 03:20:48,256 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin USBPrinting
2020-07-30 03:20:48,426 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade21to22
2020-07-30 03:20:48,483 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade22to24
2020-07-30 03:20:48,543 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade25to26
2020-07-30 03:20:48,615 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade26to27
2020-07-30 03:20:48,701 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade27to30
2020-07-30 03:20:48,762 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade30to31
2020-07-30 03:20:48,807 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade32to33
2020-07-30 03:20:48,854 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade33to34
2020-07-30 03:20:48,913 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade34to35
2020-07-30 03:20:48,930 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade35to40
2020-07-30 03:20:48,947 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade40to41
2020-07-30 03:20:48,966 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade41to42
2020-07-30 03:20:48,983 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade42to43
2020-07-30 03:20:48,999 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade43to44
2020-07-30 03:20:49,016 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade44to45
2020-07-30 03:20:49,032 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade45to46
2020-07-30 03:20:49,050 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade460to462
2020-07-30 03:20:49,065 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SimpleView
2020-07-30 03:20:49,086 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin X3DReader
2020-07-30 03:20:49,117 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin XmlMaterialProfile
2020-07-30 03:20:49,133 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin XRayView
2020-07-30 03:20:49,136 - DEBUG - [MainThread] UM.PluginRegistry.loadPlugins [374]: Loading all plugins took 3.0347068309783936 seconds
2020-07-30 03:20:49,146 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [160]: Looking for old configuration files to upgrade.
2020-07-30 03:20:49,150 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:20:49,152 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:20:49,155 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:20:49,156 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:20:49,156 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:20:49,156 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:20:49,156 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:20:49,156 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:20:49,156 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:20:49,156 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:20:49,173 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:20:49,175 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:20:49,178 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:20:49,180 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:20:49,182 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:20:49,184 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:20:49,187 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:20:49,189 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:20:49,191 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:20:49,194 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:20:49,196 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:20:49,198 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:20:49,200 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:20:49,203 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:20:49,205 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:20:49,208 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:20:49,209 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:20:49,213 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:20:49,215 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:20:49,217 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:20:49,222 - INFO - [MainThread] UM.Qt.QtApplication.startSplashWindowPhase [226]: The preferences file cannot be found or it is corrupted, so we will use default values
2020-07-30 03:20:49,224 - INFO - [MainThread] UM.Qt.QtApplication.startSplashWindowPhase [235]: The preferences file 'None' cannot be found, will use default values
2020-07-30 03:20:57,793 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [360]: Loading metadata into container registry took 8.463564395904541 seconds
2020-07-30 03:20:57,912 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [111]: Select build plate: 0
2020-07-30 03:20:57,915 - INFO - [MainThread] cura.CuraApplication.run [751]: Initializing machine error checker
2020-07-30 03:20:57,918 - INFO - [MainThread] cura.CuraApplication.run [756]: Initializing machine manager
2020-07-30 03:20:57,921 - INFO - [MainThread] cura.CuraApplication.run [761]: Initializing container manager
2020-07-30 03:20:58,166 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [255]: Changing perspective mode to perspective.
2020-07-30 03:20:58,190 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: C:\Program Files\Ultimaker Cura 4.6\resources\themes\cura-light\theme.json
2020-07-30 03:20:59,095 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme C:\Program Files\Ultimaker Cura 4.6\resources\themes\cura-light
2020-07-30 03:21:00,832 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [311]: Creating post processing plugin view.
2020-07-30 03:21:00,843 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: BQ_PauseAtHeight
2020-07-30 03:21:00,852 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: ChangeAtZ
2020-07-30 03:21:00,864 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: ColorMix
2020-07-30 03:21:00,871 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: DisplayFilenameAndLayerOnLCD
2020-07-30 03:21:00,876 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: DisplayRemainingTimeOnLCD
2020-07-30 03:21:00,881 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: FilamentChange
2020-07-30 03:21:00,886 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: InsertAtLayerChange
2020-07-30 03:21:00,892 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: PauseAtHeight
2020-07-30 03:21:00,897 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: PauseAtHeightRepRapFirmwareDuet
2020-07-30 03:21:00,904 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: PauseAtHeightforRepetier
2020-07-30 03:21:00,911 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: RetractContinue
2020-07-30 03:21:00,918 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: SearchAndReplace
2020-07-30 03:21:00,926 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: Stretch
2020-07-30 03:21:00,931 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: TimeLapse
2020-07-30 03:21:00,936 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: UsePreviousProbeMeasurements
2020-07-30 03:21:01,244 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [321]: Post processing view created.
2020-07-30 03:21:01,401 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [89]: There was no auth data or access token
2020-07-30 03:21:01,403 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [89]: There was no auth data or access token
2020-07-30 03:21:01,405 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [89]: There was no auth data or access token
2020-07-30 03:21:02,883 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:146: TypeError: Cannot read property 'extruderList' of null
2020-07-30 03:21:02,885 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:76:29: Unable to assign null to double
2020-07-30 03:21:02,894 - DEBUG - [MainThread] UM.Controller.setActiveStage [180]: Setting active stage to PrepareStage
2020-07-30 03:21:03,000 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-07-30 03:21:03,003 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:143: TypeError: Cannot read property 'hasRemoteConnection' of null
2020-07-30 03:21:03,031 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:47: TypeError: Cannot read property 'hasMaterials' of null
2020-07-30 03:21:03,033 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:118: TypeError: Cannot read property 'hasMaterials' of null
2020-07-30 03:21:03,035 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/ActionButton.qml:101: ReferenceError: contentWidth is not defined
2020-07-30 03:21:03,037 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/ActionButton.qml:101: ReferenceError: contentWidth is not defined
2020-07-30 03:21:03,039 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:247: TypeError: Cannot read property 'hasMaterials' of null
2020-07-30 03:21:03,041 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:308: TypeError: Cannot read property 'hasVariants' of null
2020-07-30 03:21:03,043 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:35: TypeError: Cannot read property 'hasMaterials' of null
2020-07-30 03:21:03,108 - DEBUG - [MainThread] UM.Controller.setActiveView [108]: Setting active view to SolidView
2020-07-30 03:21:03,111 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [111]: Creating model checker view.
2020-07-30 03:21:03,123 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [120]: Model checker view created.
2020-07-30 03:21:03,123 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [71]: Creating dialog [MoreInfoWindow.qml]
2020-07-30 03:21:03,156 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [542]: Requesting [updates] metadata from server.
2020-07-30 03:21:03,159 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [112]: No auth data to retrieve the access_token from
2020-07-30 03:21:03,160 - WARNING - [MainThread] UM.Logger.warning [128]: Cannot add authorization to Cloud Api request
2020-07-30 03:21:03,166 - DEBUG - [MainThread] cura.CuraApplication.run [799]: Booting Cura took 17.917574167251587 seconds
2020-07-30 03:21:03,171 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [346]: Request [d48203f9d6a040948a7d7682511b1ba2] started
2020-07-30 03:21:03,174 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [317]: No more requests to process, stop
2020-07-30 03:21:03,180 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-07-30 03:21:03,182 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [75]: No active GlobalStack, set quality profile model as empty.
2020-07-30 03:21:03,184 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-07-30 03:21:03,185 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [39]: No active GlobalStack, set CustomQualityProfilesDropDownMenuModel as empty.
2020-07-30 03:21:13,158 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-07-30 03:25:04,139 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin FileLogger
2020-07-30 03:25:04,150 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin FirmwareUpdateChecker
2020-07-30 03:25:04,158 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin FirmwareUpdater
2020-07-30 03:25:04,165 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeGzReader
2020-07-30 03:25:04,172 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeGzWriter
2020-07-30 03:25:04,179 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeProfileReader
2020-07-30 03:25:04,194 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeReader
2020-07-30 03:25:04,201 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeWriter
2020-07-30 03:25:04,213 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin ImageReader
2020-07-30 03:25:04,220 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin LegacyProfileReader
2020-07-30 03:25:04,228 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin LocalContainerProvider
2020-07-30 03:25:04,237 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin LocalFileOutputDevice
2020-07-30 03:25:04,245 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin MachineSettingsAction
2020-07-30 03:25:04,252 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin ModelChecker
2020-07-30 03:25:04,260 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin MonitorStage
2020-07-30 03:25:04,268 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PerObjectSettingsTool
2020-07-30 03:25:04,277 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PostProcessingPlugin
2020-07-30 03:25:04,284 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PrepareStage
2020-07-30 03:25:04,291 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PreviewStage
2020-07-30 03:25:04,301 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin RemovableDriveOutputDevice
2020-07-30 03:25:04,308 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SentryLogger
2020-07-30 03:25:04,327 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SimulationView
2020-07-30 03:25:04,338 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SliceInfoPlugin
2020-07-30 03:25:04,348 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SolidView
2020-07-30 03:25:04,357 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SupportEraser
2020-07-30 03:25:04,391 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace
2020-07-30 03:25:04,393 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None
2020-07-30 03:25:04,395 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace
2020-07-30 03:25:04,398 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None
2020-07-30 03:25:04,400 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace
2020-07-30 03:25:04,402 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None
2020-07-30 03:25:04,404 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace
2020-07-30 03:25:04,406 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None
2020-07-30 03:25:04,413 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin Toolbox
2020-07-30 03:25:04,423 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin CameraTool
2020-07-30 03:25:04,432 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin MirrorTool
2020-07-30 03:25:04,444 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin RotateTool
2020-07-30 03:25:04,457 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin ScaleTool
2020-07-30 03:25:04,465 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SelectionTool
2020-07-30 03:25:04,476 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin TranslateTool
2020-07-30 03:25:04,485 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin TrimeshReader
2020-07-30 03:25:04,497 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UFPReader
2020-07-30 03:25:04,506 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UFPWriter
2020-07-30 03:25:04,515 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UltimakerMachineActions
2020-07-30 03:25:04,617 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UM3NetworkPrinting
2020-07-30 03:25:04,625 - INFO - [Thread-1] UpdateChecker.UpdateCheckerJob.run [40]: Checking for new version of cura
2020-07-30 03:25:04,628 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UpdateChecker
2020-07-30 03:25:04,975 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin USBPrinting
2020-07-30 03:25:05,149 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade21to22
2020-07-30 03:25:05,205 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade22to24
2020-07-30 03:25:05,260 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade25to26
2020-07-30 03:25:05,320 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade26to27
2020-07-30 03:25:05,382 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade27to30
2020-07-30 03:25:05,442 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade30to31
2020-07-30 03:25:05,504 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade32to33
2020-07-30 03:25:05,546 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade33to34
2020-07-30 03:25:05,610 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade34to35
2020-07-30 03:25:05,635 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade35to40
2020-07-30 03:25:05,647 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade40to41
2020-07-30 03:25:05,657 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade41to42
2020-07-30 03:25:05,666 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade42to43
2020-07-30 03:25:05,675 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade43to44
2020-07-30 03:25:05,682 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade44to45
2020-07-30 03:25:05,689 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade45to46
2020-07-30 03:25:05,696 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade460to462
2020-07-30 03:25:05,703 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SimpleView
2020-07-30 03:25:05,715 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin X3DReader
2020-07-30 03:25:05,730 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin XmlMaterialProfile
2020-07-30 03:25:05,738 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin XRayView
2020-07-30 03:25:05,740 - DEBUG - [MainThread] UM.PluginRegistry.loadPlugins [374]: Loading all plugins took 2.132829427719116 seconds
2020-07-30 03:25:05,749 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [160]: Looking for old configuration files to upgrade.
2020-07-30 03:25:05,755 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:25:05,757 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:25:05,761 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:25:05,764 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:25:05,767 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:25:05,769 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:25:05,773 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:25:05,777 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:25:05,781 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:25:05,785 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:25:05,792 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:25:05,796 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:25:05,799 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:25:05,801 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:25:05,804 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:25:05,806 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:25:05,809 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:25:05,812 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:25:05,815 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:25:05,817 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:25:05,820 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:25:05,823 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:25:05,826 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:25:05,828 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:25:05,831 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:25:05,833 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:25:05,837 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:25:05,840 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:25:05,843 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:25:05,845 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:25:15,156 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [360]: Loading metadata into container registry took 9.20497989654541 seconds
2020-07-30 03:25:15,299 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [111]: Select build plate: 0
2020-07-30 03:25:15,302 - INFO - [MainThread] cura.CuraApplication.run [751]: Initializing machine error checker
2020-07-30 03:25:15,304 - INFO - [MainThread] cura.CuraApplication.run [756]: Initializing machine manager
2020-07-30 03:25:15,307 - INFO - [MainThread] cura.CuraApplication.run [761]: Initializing container manager
2020-07-30 03:25:15,381 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [255]: Changing perspective mode to perspective.
2020-07-30 03:25:15,403 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: C:\Program Files\Ultimaker Cura 4.6\resources\themes\cura-light\theme.json
2020-07-30 03:25:15,626 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme C:\Program Files\Ultimaker Cura 4.6\resources\themes\cura-light
2020-07-30 03:25:16,654 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [311]: Creating post processing plugin view.
2020-07-30 03:25:16,658 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: BQ_PauseAtHeight
2020-07-30 03:25:16,660 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: ChangeAtZ
2020-07-30 03:25:16,662 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: ColorMix
2020-07-30 03:25:16,663 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: DisplayFilenameAndLayerOnLCD
2020-07-30 03:25:16,664 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: DisplayRemainingTimeOnLCD
2020-07-30 03:25:16,665 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: FilamentChange
2020-07-30 03:25:16,666 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: InsertAtLayerChange
2020-07-30 03:25:16,668 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: PauseAtHeight
2020-07-30 03:25:16,669 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: PauseAtHeightRepRapFirmwareDuet
2020-07-30 03:25:16,671 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: PauseAtHeightforRepetier
2020-07-30 03:25:16,672 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: RetractContinue
2020-07-30 03:25:16,673 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: SearchAndReplace
2020-07-30 03:25:16,676 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: Stretch
2020-07-30 03:25:16,677 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: TimeLapse
2020-07-30 03:25:16,678 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: UsePreviousProbeMeasurements
2020-07-30 03:25:16,814 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [321]: Post processing view created.
2020-07-30 03:25:16,904 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [89]: There was no auth data or access token
2020-07-30 03:25:16,907 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [89]: There was no auth data or access token
2020-07-30 03:25:16,911 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [89]: There was no auth data or access token
2020-07-30 03:25:18,166 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:146: TypeError: Cannot read property 'extruderList' of null
2020-07-30 03:25:18,169 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:76:29: Unable to assign null to double
2020-07-30 03:25:18,177 - DEBUG - [MainThread] UM.Controller.setActiveStage [180]: Setting active stage to PrepareStage
2020-07-30 03:25:18,239 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-07-30 03:25:18,243 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:143: TypeError: Cannot read property 'hasRemoteConnection' of null
2020-07-30 03:25:18,263 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:47: TypeError: Cannot read property 'hasMaterials' of null
2020-07-30 03:25:18,266 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:118: TypeError: Cannot read property 'hasMaterials' of null
2020-07-30 03:25:18,269 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/ActionButton.qml:101: ReferenceError: contentWidth is not defined
2020-07-30 03:25:18,271 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/ActionButton.qml:101: ReferenceError: contentWidth is not defined
2020-07-30 03:25:18,274 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:247: TypeError: Cannot read property 'hasMaterials' of null
2020-07-30 03:25:18,276 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:308: TypeError: Cannot read property 'hasVariants' of null
2020-07-30 03:25:18,278 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:35: TypeError: Cannot read property 'hasMaterials' of null
2020-07-30 03:25:18,312 - DEBUG - [MainThread] UM.Controller.setActiveView [108]: Setting active view to SolidView
2020-07-30 03:25:18,313 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [111]: Creating model checker view.
2020-07-30 03:25:18,318 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [120]: Model checker view created.
2020-07-30 03:25:18,319 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [71]: Creating dialog [MoreInfoWindow.qml]
2020-07-30 03:25:18,345 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [542]: Requesting [updates] metadata from server.
2020-07-30 03:25:18,349 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [112]: No auth data to retrieve the access_token from
2020-07-30 03:25:18,351 - WARNING - [MainThread] UM.Logger.warning [128]: Cannot add authorization to Cloud Api request
2020-07-30 03:25:18,357 - DEBUG - [MainThread] cura.CuraApplication.run [799]: Booting Cura took 15.337218284606934 seconds
2020-07-30 03:25:18,362 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [346]: Request [ecfab21fcb3940329106049244343bbf] started
2020-07-30 03:25:18,365 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [317]: No more requests to process, stop
2020-07-30 03:25:18,368 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-07-30 03:25:18,370 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [75]: No active GlobalStack, set quality profile model as empty.
2020-07-30 03:25:18,373 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-07-30 03:25:18,375 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [39]: No active GlobalStack, set CustomQualityProfilesDropDownMenuModel as empty.
2020-07-30 03:25:18,719 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [207]: Support for Vertex Array Objects: True
2020-07-30 03:25:18,735 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [112]: Initialized OpenGL subsystems.
2020-07-30 03:25:18,739 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [113]: OpenGL Version: 4.1.0 - Build 26.20.100.7324
2020-07-30 03:25:18,741 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [114]: OpenGL Vendor: Intel
2020-07-30 03:25:18,745 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [115]: OpenGL Renderer: Intel(R) UHD Graphics 630
2020-07-30 03:25:18,747 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [116]: GLSL Version: 4.10.0
2020-07-30 03:25:18,749 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\default.shader]...
2020-07-30 03:25:18,766 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\selection.shader]...
2020-07-30 03:25:18,780 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\select_face.shader]...
2020-07-30 03:25:18,794 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\default.shader]...
2020-07-30 03:25:18,805 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\composite.shader]...
2020-07-30 03:25:18,825 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\overhang.shader]...
2020-07-30 03:25:18,846 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\striped.shader]...
2020-07-30 03:25:18,865 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\transparent_object.shader]...
2020-07-30 03:25:18,880 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\striped.shader]...
2020-07-30 03:25:18,895 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\xray.shader]...
2020-07-30 03:25:18,908 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\xray_composite.shader]...
2020-07-30 03:25:18,943 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\platform.shader]...
2020-07-30 03:25:18,980 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\xray.shader]...
2020-07-30 03:25:19,636 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [408]: Request [ecfab21fcb3940329106049244343bbf] finished.
2020-07-30 03:25:19,638 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [317]: No more requests to process, stop
2020-07-30 03:25:22,637 - INFO - [MainThread] cura.CuraApplication.writeToLog [570]: User accepted the User-Agreement.
2020-07-30 03:25:32,644 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-07-30 03:25:35,435 - INFO - [MainThread] cura.Settings.MachineManager.addMachine [358]: Trying to add a machine with the definition id [creality_ender3]
2020-07-30 03:25:35,676 - WARNING - [MainThread] LocalContainerProvider.LocalContainerProvider._saveCachedDefinition [286]: The definition cache for definition creality_ender3 failed to pickle.
2020-07-30 03:25:36,088 - DEBUG - [MainThread] cura.Machines.ContainerTree.__getitem__ [106]: Adding container tree for creality_ender3 took 0.37100768089294434 seconds.
2020-07-30 03:25:36,222 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [184]: Extruder[creality_base_extruder_0 #2] added to [Creality Ender-3] at position [0]
2020-07-30 03:25:36,224 - WARNING - [MainThread] UM.Decorators.deprecated_function [23]: <function GlobalStack.extruders at 0x000002B77C41E510> is deprecated (since 4.4): Please use extruderList instead.
2020-07-30 03:25:36,227 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [72]: Default machine actions added for machine definition [creality_ender3]
2020-07-30 03:25:36,457 - WARNING - [MainThread] LocalContainerProvider.LocalContainerProvider._saveCachedDefinition [286]: The definition cache for definition creality_base failed to pickle.
2020-07-30 03:25:36,504 - WARNING - [MainThread] cura.Settings.GlobalStack.addExtruder [179]: Extruder [creality_base_extruder_0 #2] has already been added to this stack [Creality Ender-3]
2020-07-30 03:25:36,506 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [creality_base_extruder_0 #2] has already been registered on machine [Creality Ender-3], not doing anything
2020-07-30 03:25:36,508 - INFO - [MainThread] UM.Logger.info [122]: Initializing Active Machine...
2020-07-30 03:25:36,580 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-07-30 03:25:36,621 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-07-30 03:25:36,624 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-07-30 03:25:36,629 - INFO - [Thread-3] STLReader.STLReader.load_file [52]: Using NumPy-STL to load STL data.
2020-07-30 03:25:36,673 - DEBUG - [Thread-3] UM.Mesh.MeshData.calculateNormalsFromVertices [548]: Calculating normals took 0.0 seconds
2020-07-30 03:25:36,674 - DEBUG - [Thread-3] STLReader.STLReader._read [104]: Loaded a mesh with 8520 vertices
2020-07-30 03:25:37,014 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-07-30 03:25:37,123 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-07-30 03:25:37,127 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-07-30 03:25:37,193 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [74]: No machine with name Creality Ender-3 in list of firmware to check.
2020-07-30 03:25:37,257 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\default.shader]...
2020-07-30 03:25:37,267 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\grid.shader]...
2020-07-30 03:25:37,327 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-07-30 03:25:37,331 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-07-30 03:25:37,997 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 1.0s
2020-07-30 03:25:45,437 - INFO - [Thread-4] STLReader.STLReader.load_file [52]: Using NumPy-STL to load STL data.
2020-07-30 03:25:45,759 - DEBUG - [Thread-4] UM.Mesh.MeshData.calculateNormalsFromVertices [548]: Calculating normals took 0.1296525001525879 seconds
2020-07-30 03:25:45,793 - DEBUG - [Thread-4] STLReader.STLReader._read [104]: Loaded a mesh with 4670010 vertices
2020-07-30 03:25:46,641 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-07-30 03:25:46,816 - DEBUG - [Thread-4] UM.Mesh.MeshData.approximateConvexHull [503]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 1.0129852294921875 seconds. 6444 input vertices. 6444 output vertices.
2020-07-30 03:25:47,403 - DEBUG - [Thread-4] UM.FileHandler.ReadFileJob.run [71]: Loading file took 2.0 seconds
2020-07-30 03:25:48,384 - DEBUG - [Thread-4] UM.Mesh.MeshData.approximateConvexHull [503]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.9778611660003662 seconds. 6443 input vertices. 6443 output vertices.
2020-07-30 03:25:48,409 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x000002B70DCB3048>, took 0ms
2020-07-30 03:25:48,813 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\transparent_object.shader]...
2020-07-30 03:25:50,420 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [237]: Starting to slice...
2020-07-30 03:25:50,420 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [255]: Going to slice build plate [0]!
2020-07-30 03:25:50,426 - WARNING - [Thread-5] UM.Decorators.deprecated_function [23]: <function GlobalStack.extruders at 0x000002B77C41E510> is deprecated (since 4.4): Please use extruderList instead.
2020-07-30 03:25:50,835 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [444]: Sending slice message took 0.414142370223999 seconds
2020-07-30 03:25:52,711 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] [WARNING] Mesh has disconnected faces!
2020-07-30 03:25:52,714 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] [WARNING] Mesh has overlapping faces!
2020-07-30 03:25:53,662 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] [WARNING] -s support_pattern="zigzag" -s travel_compensate_overlapping_walls_enabled="True" -s wireframe_printspeed_bottom="5" -s prime_tower_enable="False" -s retraction_hop_only_when_collides="False" -s flow_rate_max_extrusion_offset="0" -s speed_slowdown_layers="2" -s connect_infill_polygons="False" -s support_line_width="0.4" -s machine_name="Creality Ender-3" -s jerk_travel_layer_0="8" -s wireframe_straight_before_down="20" -s speed_wall_x="25.0" -s speed_equalize_flow_enabled="False" -s skirt_brim_speed="20.0" -s support_tree_collision_resolution="0.2" -s prime_tower_flow="100" -s machine_nozzle_cool_down_speed="2.0" -s acceleration_support="500" -s speed_travel="150.0" -s z_seam_y="235" -s machine_buildplate_type="glass" -s jerk_layer_0="8" -s wall_min_flow="0" -s material_guid="" -s machine_height="250" -s slicing_tolerance="middle" -s machine_heated_build_volume="False" -s cross_infill_pocket_size="6.0" -s speed_support="25.0" -s meshfix_maximum_deviation="0.05" -s infill_wipe_dist="0.0" -s cool_min_layer_time_fan_speed_max="10" -s acceleration_wall_x="500" -s small_feature_speed_factor_0="50" -s retraction_min_travel="1.5" -s jerk_ironing="8" -s bridge_skin_density="100" -s draft_shield_height="10" -s cross_support_density_image="" -s switch_extruder_retraction_amount="16" -s mold_roof_height="0.5" -s acceleration_support_interface="500" -s material_crystallinity="False" -s raft_base_fan_speed="0" -s switch_extruder_retraction_speeds="20" -s machine_disallowed_areas="[[[-117.5, 117.5], [-117.5, 108], [117.5, 108], [117.5, 117.5]], [[-117.5, -108], [-117.5, -117.5], [117.5, -117.5], [117.5, -108]]]" -s line_width="0.4" -s machine_steps_per_mm_x="50" -s small_feature_speed_factor="50" -s machine_settings="0" -s ironing_pattern="zigzag" -s support_bottom_line_width="0.4" -s infill_material_flow="100" -s bridge_skin_material_flow_3="110" -s raft_surface_line_width="0.4" -s cross_infill_density_image="" -s support_roof_enable="True" -s jerk_support="8" -s raft_interface_thickness="0.30000000000000004" -s retraction_retract_speed="25" -s support_enable="False" -s spaghetti_infill_enabled="False" -s switch_extruder_extra_prime_amount="0" -s machine_steps_per_mm_z="50" -s small_hole_max_size="0" -s support_roof_height="0.8" -s bridge_skin_material_flow_2="100" -s machine_endstop_positive_direction_y="False" -s raft_jerk="8" -s top_layers="4" -s brim_width="8.0" -s acceleration_travel="500" -s wall_line_width="0.4" -s travel_compensate_overlapping_walls_x_enabled="True" -s sub_div_rad_add="0.4" -s travel_avoid_other_parts="True" -s acceleration_travel_layer_0="500" -s machine_width="235" -s wireframe_enabled="False" -s material_diameter="1.75" -s support_offset="0" -s bridge_skin_support_threshold="50" -s material_break_retracted_position="-50" -s raft_surface_line_spacing="0.4" -s bridge_fan_speed_2="0" -s support_tower_maximum_supported_diameter="3.0" -s filter_out_tiny_gaps="False" -s raft_interface_acceleration="500" -s cool_lift_head="False" -s material_print_temperature_layer_0="210" -s travel_avoid_distance="0.625" -s draft_shield_height_limitation="full" -s meshfix_keep_open_polygons="False" -s minimum_bottom_area="10" -s prime_blob_enable="False" -s wall_overhang_angle="90" -s wireframe_fall_down="0.5" -s bottom_thickness="0.8" -s support_tower_roof_angle="65" -s bridge_settings_enabled="False" -s mesh_position_x="0" -s ironing_only_highest_layer="False" -s support_infill_sparse_thickness="0.2" -s coasting_enable="False" -s blackmagic="0" -s xy_offset_layer_0="0" -s meshfix_union_all_remove_holes="False" -s bridge_wall_speed="12.5" -s acceleration_infill="500" -s material_flush_purge_speed="0.5" -s travel_speed="150.0" -s mold_angle="40" -s support_interface_height="0.8" -s jerk_wall_x="8" -s wireframe_roof_fall_down="2" -s raft_surface_speed="25.0" -s wall_line_count="2" -s raft_base_line_width="0.8" -s xy_offset="0" -s acceleration_support_roof="500" -s gradual_infill_steps="0" -s raft_base_jerk="8" -s center_object="False" -s machine_depth="235" -s alternate_carve_order="True" -s support_angle="45" -s machine_max_jerk_e="5" -s material_flow_layer_0="100" -s alternate_extra_perimeter="False" -s bridge_wall_min_length="5" -s ironing_enabled="False" -s support_interface_offset="0.0" -s default_material_bed_temperature="50" -s support_roof_density="33.333" -s material_standby_temperature="150" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s material_print_temp_prepend="True" -s machine_max_jerk_xy="10" -s wireframe_roof_outer_delay="0.2" -s material_adhesion_tendency="10" -s z_seam_x="117.5" -s jerk_topbottom="8" -s wipe_hop_speed="5" -s support_wall_count="1" -s wireframe_roof_drag_along="0.8" -s jerk_support_roof="8" -s top_thickness="0.8" -s infill_overlap_mm="0.12" -s support_extruder_nr="0" -s support_fan_enable="False" -s infill_sparse_thickness="0.2" -s layer_start_x="0.0" -s support_top_distance="0.2" -s smooth_spiralized_contours="True" -s support_brim_enable="True" -s support_extruder_nr_layer_0="0" -s skin_overlap="10.0" -s acceleration_layer_0="500" -s wireframe_bottom_delay="0" -s material_anti_ooze_retraction_speed="5" -s material_end_of_filament_purge_speed="0.5" -s machine_max_feedrate_e="50" -s top_bottom_pattern_0="lines" -s infill_angles="[ ]" -s time="03:25:50" -s wall_0_extruder_nr="-1" -s initial_extruder_nr="0" -s jerk_travel="8" -s acceleration_support_infill="500" -s bridge_skin_density_3="80" -s wipe_retraction_extra_prime_amount="0" -s raft_base_acceleration="500" -s wall_overhang_speed_factor="100" -s skirt_brim_line_width="0.4" -s machine_nozzle_head_distance="3" -s machine_show_variants="False" -s speed_support_bottom="25.0" -s mold_width="5" -s machine_endstop_positive_direction_z="True" -s minimum_roof_area="10" -s wireframe_nozzle_clearance="1" -s infill_overlap="30.0" -s bridge_skin_density_2="75" -s speed_ironing="16.666666666666668" -s material_no_load_move_factor="0.940860215" -s spaghetti_max_height="2.0" -s initial_layer_line_width_factor="100.0" -s wireframe_top_delay="0" -s day="Thu" -s roofing_pattern="lines" -s print_bed_temperature="50" -s speed_equalize_flow_max="150" -s support_infill_extruder_nr="0" -s ironing_flow="10.0" -s support_roof_extruder_nr="0" -s support_initial_layer_line_distance="2.0" -s support_conical_angle="30" -s support_interface_line_width="0.4" -s wall_x_material_flow="100" -s acceleration_topbottom="500" -s skin_outline_count="1" -s magic_spiralize="False" -s support_bottom_stair_step_height="0.3" -s bridge_enable_more_layers="True" -s material_break_temperature="50" -s draft_shield_enabled="False" -s adaptive_layer_height_enabled="False" -s material_initial_print_temperature="210" -s prime_tower_min_volume="6" -s optimize_wall_printing_order="True" -s support_roof_line_width="0.4" -s machine_max_feedrate_z="10" -s min_skin_width_for_expansion="4.898587196589413e-17" -s machine_acceleration="500" -s speed_z_hop="5" -s raft_surface_jerk="8" -s support_infill_rate="20" -s acceleration_ironing="500" -s speed_infill="50.0" -s material_bed_temperature="50" -s wireframe_printspeed_down="5" -s support_type="everywhere" -s travel_retract_before_outer_wall="True" -s wall_0_wipe_dist="0.0" -s raft_interface_speed="18.75" -s wall_line_width_0="0.4" -s material_bed_temp_prepend="True" -s retraction_combing_max_distance="30" -s hole_xy_offset="0" -s machine_nozzle_temp_enabled="True" -s skirt_line_count="3" -s cool_fan_speed_0="0" -s wireframe_printspeed_flat="5" -s jerk_print="8" -s acceleration_support_bottom="500" -s command_line_settings="0" -s bridge_fan_speed="100" -s ooze_shield_enabled="False" -s machine_center_is_zero="False" -s material_surface_energy="100" -s raft_base_speed="18.75" -s resolution="0" -s prime_tower_position_y="203.6" -s machine_head_with_fans_polygon="[[-26, 34], [-26, -32], [32, -32], [32, 34]]" -s wall_extruder_nr="-1" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s raft_acceleration="500" -s support_interface_density="33.333" -s machine_start_gcode="; Ender 3 Custom Start G-code
2020-07-30 03:25:53,664 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G92 E0 ; Reset Extruder
2020-07-30 03:25:53,666 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G28 ; Home all axes
2020-07-30 03:25:53,668 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
2020-07-30 03:25:53,670 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
2020-07-30 03:25:53,672 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
2020-07-30 03:25:53,674 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
2020-07-30 03:25:53,676 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
2020-07-30 03:25:53,678 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G92 E0 ; Reset Extruder
2020-07-30 03:25:53,680 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
2020-07-30 03:25:53,682 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish" -s machine_max_acceleration_e="5000" -s jerk_print_layer_0="8" -s support_bottom_material_flow="100" -s wipe_retraction_speed="25" -s extruder_prime_pos_x="0" -s meshfix_union_all="True" -s machine_extruder_count="1" -s support_infill_angles="[ ]" -s material_break_preparation_temperature="210" -s flow_rate_extrusion_offset_factor="100" -s adaptive_layer_height_variation="0.04" -s minimum_polygon_circumference="1.0" -s skin_no_small_gaps_heuristic="False" -s speed_support_infill="25.0" -s support_skip_zag_per_mm="20" -s infill_offset_y="0" -s support_join_distance="2.0" -s spaghetti_inset="0.2" -s magic_fuzzy_skin_point_dist="0.8" -s wipe_retraction_enable="True" -s machine_min_cool_heat_time_window="50.0" -s cool_min_speed="10" -s infill_mesh_order="0" -s infill_support_angle="40" -s machine_firmware_retract="False" -s raft_surface_thickness="0.2" -s prime_tower_position_x="223.6" -s support_bottom_distance="0.2" -s acceleration_wall="500" -s jerk_support_interface="8" -s retraction_hop_after_extruder_switch="True" -s wireframe_drag_along="0.6" -s wireframe_strategy="compensate" -s speed_topbottom="25.0" -s raft_margin="15" -s infill_mesh="False" -s infill_line_distance="6.0" -s support_roof_material_flow="100" -s spaghetti_infill_stepped="True" -s bridge_skin_speed_2="12.5" -s acceleration_wall_0="500" -s switch_extruder_prime_speed="20" -s material_flush_purge_length="60" -s wireframe_flow_connection="100" -s top_bottom_thickness="0.8" -s wireframe_top_jump="0.6" -s support_tower_diameter="3.0" -s retraction_hop_enabled="False" -s acceleration_roofing="500" -s wipe_pause="0" -s adaptive_layer_height_variation_step="0.04" -s wipe_repeat_count="5" -s support_skip_some_zags="False" -s bridge_fan_speed_3="0" -s speed_wall_0="25.0" -s meshfix="0" -s skirt_brim_minimal_length="250" -s support_xy_overrides_z="xy_overrides_z" -s support_bottom_offset="0.0" -s speed_wall="25.0" -s coasting_speed="90" -s roofing_layer_count="0" -s material_bed_temperature_layer_0="50" -s retraction_count_max="100" -s extruder_prime_pos_abs="False" -s ooze_shield_angle="60" -s cool_fan_full_at_height="0.6000000000000001" -s initial_bottom_layers="4" -s support_zag_skip_count="10" -s skirt_gap="10.0" -s cool_fan_full_layer="4" -s infill_enable_travel_optimization="False" -s roofing_angles="[ ]" -s support_tree_branch_diameter="2" -s z_seam_corner="z_seam_corner_weighted" -s machine_steps_per_mm_e="1600" -s retraction_combing="noskin" -s skirt_brim_material_flow="100" -s machine_extruders_share_heater="False" -s cooling="0" -s wall_thickness="0.8" -s support_bottom_height="0.8" -s material_print_temp_wait="True" -s acceleration_enabled="False" -s retraction_prime_speed="25" -s z_seam_type="back" -s speed_print_layer_0="20.0" -s support_line_distance="2.0" -s machine_shape="rectangular" -s prime_tower_size="20" -s speed_support_interface="25.0" -s wall_0_inset="0" -s speed="0" -s z_seam_position="back" -s material_shrinkage_percentage="0" -s skin_line_width="0.4" -s wipe_move_distance="20" -s infill_pattern="cubic" -s minimum_interface_area="10" -s infill_before_walls="False" -s zig_zaggify_infill="False" -s travel_avoid_supports="True" -s shell="0" -s spaghetti_infill_extra_volume="0" -s support_interface_extruder_nr="0" -s spaghetti_max_infill_angle="10" -s infill_line_width="0.4" -s roofing_material_flow="100" -s wireframe_up_half_speed="0.3" -s cool_fan_enabled="True" -s support_xy_distance="0.8" -s infill_extruder_nr="-1" -s acceleration_skirt_brim="500" -s raft_interface_line_width="0.8" -s meshfix_extensive_stitching="False" -s clean_between_layers="False" -s cool_min_layer_time="10" -s machine_max_feedrate_x="500" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s material_extrusion_cool_down_speed="0.7" -s top_bottom_pattern="lines" -s material_maximum_park_duration="300" -s infill_support_enabled="False" -s travel="0" -s max_extrusion_before_wipe="10" -s ooze_shield_dist="2" -s wireframe_height="3" -s support_interface_enable="True" -s support_brim_width="4" -s jerk_support_bottom="8" -s conical_overhang_enabled="False" -s ironing_line_spacing="0.1" -s retraction_hop_after_extruder_switch_height="0.2" -s machine_end_gcode="G91 ;Relative positioning
2020-07-30 03:25:53,684 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 E-2 F2700 ;Retract a bit
2020-07-30 03:25:53,686 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 E-2 Z0.2 F2400 ;Retract and raise Z
2020-07-30 03:25:53,688 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X5 Y5 F3000 ;Wipe out
2020-07-30 03:25:53,690 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 Z10 ;Raise Z more
2020-07-30 03:25:53,692 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G90 ;Absolute positionning
2020-07-30 03:25:53,694 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend]
2020-07-30 03:25:53,696 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X0 Y235 ;Present print
2020-07-30 03:25:53,698 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] M106 S0 ;Turn-off fan
2020-07-30 03:25:53,700 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] M104 S0 ;Turn-off hotend
2020-07-30 03:25:53,702 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] M140 S0 ;Turn-off bed
2020-07-30 03:25:53,704 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend]
2020-07-30 03:25:53,706 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] M84 X Y E ;Disable all steppers but Z
2020-07-30 03:25:53,709 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] " -s raft_base_thickness="0.24" -s zig_zaggify_support="False" -s fill_perimeter_gaps="everywhere" -s carve_multiple_volumes="False" -s retraction_amount="6.5" -s skin_preshrink="0.8" -s ironing_inset="0.2" -s spaghetti_flow="20" -s prime_tower_wipe_enabled="True" -s layer_start_y="0.0" -s material_flow_dependent_temperature="False" -s support_material_flow="100" -s wipe_retraction_prime_speed="25" -s support_bottom_enable="True" -s retraction_enable="True" -s infill_sparse_density="20" -s minimum_support_area="2" -s jerk_skirt_brim="8" -s roofing_extruder_nr="-1" -s cool_fan_speed_max="100.0" -s support_interface_angles="[ ]" -s machine_feeder_wheel_diameter="10.0" -s support_bottom_density="33.333" -s wall_material_flow="100" -s support_interface_pattern="grid" -s raft_fan_speed="0" -s remove_empty_first_layers="True" -s bottom_layers="4" -s prime_tower_brim_enable="False" -s magic_mesh_surface_mode="normal" -s coasting_min_volume="0.8" -s outer_inset_first="False" -s speed_travel_layer_0="100.0" -s support_bottom_extruder_nr="0" -s extruder_prime_pos_z="0" -s machine_nozzle_expansion_angle="45" -s support_conical_enabled="False" -s cool_fan_speed_min="100.0" -s support_tree_branch_distance="1" -s jerk_infill="8" -s wall_min_flow_retract="False" -s machine_nozzle_size="0.4" -s support_tree_branch_diameter_angle="5" -s nozzle_disallowed_areas="[]" -s meshfix_maximum_resolution="0.05" -s speed_roofing="25.0" -s wipe_hop_enable="False" -s machine_nozzle_heat_up_speed="2.0" -s support_roof_line_distance="2.4000240002400024" -s brim_outside_only="True" -s min_infill_area="0" -s acceleration_print_layer_0="500" -s limit_support_retractions="True" -s draft_shield_dist="10" -s wall_0_material_flow="100" -s bridge_wall_coast="100" -s support_roof_offset="0.0" -s retraction_extra_prime_amount="0" -s acceleration_print="500" -s machine_max_acceleration_z="100" -s fill_outline_gaps="False" -s raft_interface_fan_speed="0" -s coasting_volume="0.064" -s wall_x_extruder_nr="-1" -s experimental="0" -s gantry_height="25" -s support_interface_skip_height="0.2" -s material="0" -s expand_skins_expand_distance="0.8" -s support_supported_skin_fan_speed="100" -s wireframe_printspeed_up="5" -s wipe_hop_amount="0.2" -s extruder_prime_pos_y="0" -s extruders_enabled_count="1" -s mesh_position_y="0" -s support_tree_angle="40" -s material_final_print_temperature="210" -s machine_max_acceleration_y="500" -s adhesion_type="skirt" -s roofing_line_width="0.4" -s wireframe_flow_flat="100" -s bridge_wall_material_flow="50" -s material_print_temperature="210" -s conical_overhang_angle="50" -s speed_support_roof="25.0" -s machine_nozzle_tip_outer_diameter="1" -s max_skin_angle_for_expansion="90" -s wipe_retraction_amount="6.5" -s default_material_print_temperature="210" -s speed_prime_tower="25.0" -s mesh_position_z="0" -s brim_gap="0" -s cutting_mesh="False" -s wireframe_printspeed="5" -s platform_adhesion="0" -s wall_line_width_x="0.4" -s magic_fuzzy_skin_thickness="0.3" -s magic_fuzzy_skin_enabled="False" -s wireframe_flat_delay="0.1" -s gradual_support_infill_steps="0" -s layer_0_z_overlap="0.15" -s infill_randomize_start_location="False" -s top_skin_expand_distance="0.8" -s speed_layer_0="20.0" -s support_mesh_drop_down="True" -s machine_max_feedrate_y="500" -s build_volume_temperature="28" -s bottom_skin_expand_distance="0.8" -s switch_extruder_retraction_speed="20" -s wipe_retraction_retract_speed="25" -s z_seam_relative="False" -s layer_height_0="0.2" -s support_roof_angles="[ ]" -s material_anti_ooze_retracted_position="-4" -s top_skin_preshrink="0.8" -s support_interface_material_flow="100" -s cool_fan_speed="100.0" -s machine_steps_per_mm_y="50" -s machine_minimum_feedrate="0.0" -s support_bottom_line_distance="2.4000240002400024" -s multiple_mesh_overlap="0.15" -s machine_max_jerk_z="0.4" -s acceleration_prime_tower="500" -s raft_smoothing="5" -s material_break_speed="25" -s material_break_preparation_retracted_position="-16" -s support="0" -s skin_edge_support_layers="0" -s raft_interface_jerk="8" -s infill_wall_line_count="0" -s relative_extrusion="False" -s adhesion_extruder_nr="0" -s raft_base_line_spacing="1.6" -s support_connect_zigzags="True" -s material_end_of_filament_purge_length="20" -s bottom_skin_preshrink="0.8" -s machine_nozzle_id="unknown" -s support_bottom_pattern="grid" -s travel_compensate_overlapping_walls_0_enabled="False" -s support_mesh="False" -s gradual_support_infill_step_height="1" -s skin_angles="[ ]" -s jerk_prime_tower="8" -s adaptive_layer_height_threshold="0.2" -s raft_speed="25.0" -s support_roof_pattern="grid" -s magic_fuzzy_skin_outside_only="False" -s magic_fuzzy_skin_point_density="1.25" -s machine_heated_bed="True" -s support_bottom_stair_step_width="5.0" -s material_flow="100" -s retraction_extrusion_window="10" -s support_conical_min_width="5.0" -s gradual_infill_step_height="1.5" -s material_bed_temp_wait="True" -s support_bottom_angles="[ ]" -s infill="0" -s raft_interface_line_spacing="1.0" -s raft_surface_acceleration="500" -s bridge_skin_speed="12.5" -s wipe_brush_pos_x="100" -s jerk_roofing="8" -s wireframe_flow="100" -s material_break_preparation_speed="2" -s speed_print="50.0" -s brim_replaces_support="False" -s meshfix_maximum_travel_resolution="0.05" -s retraction_speed="25" -s anti_overhang_mesh="False" -s top_bottom_extruder_nr="-1" -s prime_tower_line_width="0.4" -s infill_multiplier="1" -s raft_surface_layers="2" -s machine_max_acceleration_x="500" -s infill_offset_x="0" -s jerk_wall="8" -s raft_surface_fan_speed="0" -s mold_enabled="False" -s date="30-07-2020" -s machine_heat_zone_length="16" -s support_tree_enable="False" -s skin_overlap_mm="0.04" -s support_use_towers="False" -s jerk_support_infill="8" -s small_feature_max_length="0.0" -s bridge_skin_material_flow="60" -s raft_airgap="0.3" -s brim_line_count="20" -s skin_edge_support_thickness="0" -s support_brim_line_count="10" -s connect_skin_polygons="False" -s support_z_distance="0.2" -s retract_at_layer_change="False" -s skin_material_flow="100" -s wireframe_roof_inset="3" -s support_xy_distance_overhang="0.4" -s print_sequence="all_at_once" -s bridge_skin_speed_3="12.5" -s jerk_wall_0="8" -s machine_endstop_positive_direction_x="False" -s machine_use_extruder_offset_to_offset_coords="True" -s retraction_hop="0.2" -s dual="0" -s jerk_enabled="False" -s layer_height="0.2" -s bridge_sparse_infill_max_density="0" -s print_temperature="210" -e0 -s support_pattern="zigzag" -s travel_compensate_overlapping_walls_enabled="True" -s speed_travel_layer_0="100.0" -s retraction_hop_only_when_collides="False" -s raft_interface_fan_speed="0" -s acceleration_travel_layer_0="500" -s connect_infill_polygons="False" -s support_line_width="0.4" -s bridge_fan_speed="100" -s jerk_travel_layer_0="8" -s speed_wall_x="25.0" -s speed_equalize_flow_enabled="False" -s extruder_prime_pos_z="0" -s machine_extruder_start_pos_x="0" -s skirt_brim_speed="20.0" -s alternate_extra_perimeter="False" -s support_tree_collision_resolution="0.2" -s prime_tower_flow="100" -s machine_nozzle_cool_down_speed="2.0" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s acceleration_support="500" -s speed_travel="150.0" -s speed_equalize_flow_max="150" -s machine_extruder_start_code="" -s z_seam_y="235" -s jerk_layer_0="8" -s wall_min_flow="0" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s slicing_tolerance="middle" -s cross_infill_pocket_size="6.0" -s speed_support="25.0" -s meshfix_maximum_deviation="0.05" -s infill_wipe_dist="0.0" -s raft_base_fan_speed="0" -s switch_extruder_retraction_speeds="20" -s cool_min_layer_time_fan_speed_max="10" -s acceleration_wall_x="500" -s small_feature_speed_factor_0="50" -s retraction_min_travel="1.5" -s jerk_ironing="8" -s bridge_sparse_infill_max_density="0" -s bridge_skin_density="100" -s cross_support_density_image="" -s switch_extruder_retraction_amount="16" -s mold_roof_height="0.5" -s acceleration_support_interface="500" -s material_crystallinity="False" -s line_width="0.4" -s machine_steps_per_mm_x="50" -s small_feature_speed_factor="50" -s machine_settings="0" -s ironing_pattern="zigzag" -s acceleration_print="500" -s support_bottom_line_width="0.4" -s infill_material_flow="100" -s bridge_skin_material_flow_3="110" -s raft_surface_line_width="0.4" -s cross_infill_density_image="" -s support_roof_enable="True" -s jerk_support="8" -s raft_interface_thickness="0.30000000000000004" -s retraction_retract_speed="45" -s spaghetti_infill_enabled="False" -s switch_extruder_extra_prime_amount="0" -s machine_steps_per_mm_z="50" -s small_hole_max_size="0" -s support_roof_height="0.8" -s support_bottom_height="0.8" -s material_flush_purge_speed="0.5" -s bridge_skin_material_flow_2="100" -s machine_endstop_positive_direction_y="False" -s resolution="0" -s extruder_nr="0" -s raft_jerk="8" -s top_layers="4" -s brim_width="8.0" -s machine_extruder_end_pos_x="0" -s acceleration_travel="500" -s wall_line_width="0.4" -s travel_compensate_overlapping_walls_x_enabled="True" -s sub_div_rad_add="0.4" -s travel_avoid_other_parts="True" -s material_diameter="1.75" -s support_offset="0" -s bridge_skin_support_threshold="50" -s extruder_prime_pos_y="0" -s material_break_retracted_position="-50" -s raft_surface_line_spacing="0.4" -s bridge_fan_speed_2="0" -s support_tower_maximum_supported_diameter="3.0" -s support_xy_distance_overhang="0.4" -s filter_out_tiny_gaps="False" -s raft_interface_acceleration="500" -s cool_lift_head="False" -s material_print_temperature_layer_0="200" -s travel_avoid_distance="0.625" -s gradual_support_infill_steps="0" -s brim_gap="0" -s blackmagic="0" -s wipe_retraction_amount="5" -s bridge_wall_material_flow="50" -s support_tree_angle="40" -s material_final_print_temperature="200" -s mesh_position_y="0" -s support_conical_enabled="False" -s cool_fan_speed_min="100" -s support_tree_branch_distance="1" -s support_roof_density="33.333" -s material_standby_temperature="180" -s material_flow_layer_0="100" -s max_skin_angle_for_expansion="90" -s machine_nozzle_tip_outer_diameter="1" -s skin_no_small_gaps_heuristic="False" -s experimental="0" -s travel_compensate_overlapping_walls_0_enabled="False" -s fill_outline_gaps="False" -s retraction_extra_prime_amount="0" -s support_roof_offset="0.0" -s wall_0_material_flow="100" -s bridge_wall_coast="100" -s acceleration_support_infill="500" -s bridge_skin_density_3="80" -s wipe_retraction_extra_prime_amount="0" -s raft_base_acceleration="500" -s wall_overhang_speed_factor="100" -s raft_surface_thickness="0.2" -s cool_fan_speed_0="0" -s skirt_brim_line_width="0.4" -s machine_nozzle_head_distance="3" -s speed_support_bottom="25.0" -s skirt_brim_minimal_length="250" -s support_xy_overrides_z="xy_overrides_z" -s mold_width="5" -s machine_endstop_positive_direction_z="True" -s minimum_roof_area="10" -s infill_overlap="30.0" -s bridge_skin_density_2="75" -s top_bottom_thickness="0.8" -s speed_ironing="16.666666666666668" -s material_no_load_move_factor="0.940860215" -s spaghetti_max_height="2.0" -s initial_layer_line_width_factor="100.0" -s raft_margin="15" -s acceleration_wall="500" -s support_bottom_distance="0.2" -s roofing_pattern="lines" -s material_extrusion_cool_down_speed="0.7" -s ironing_flow="10.0" -s support_initial_layer_line_distance="2.0" -s min_skin_width_for_expansion="4.898587196589413e-17" -s support_conical_angle="30" -s support_interface_line_width="0.4" -s wall_x_material_flow="100" -s acceleration_topbottom="500" -s skin_outline_count="1" -s wall_line_count="2" -s support_bottom_stair_step_height="0.3" -s bridge_enable_more_layers="True" -s material_break_temperature="50" -s material_initial_print_temperature="200" -s prime_tower_min_volume="6" -s magic_fuzzy_skin_enabled="False" -s z_seam_x="117.5" -s optimize_wall_printing_order="True" -s support_roof_line_width="0.4" -s support_skip_zag_per_mm="20" -s speed_support_infill="25.0" -s bottom_layers="4" -s meshfix="0" -s speed_wall_0="25.0" -s speed_z_hop="5" -s raft_surface_jerk="8" -s support_infill_rate="20" -s acceleration_ironing="500" -s speed_infill="50.0" -s raft_interface_speed="18.75" -s wall_line_width_0="0.4" -s retraction_combing_max_distance="30" -s hole_xy_offset="0" -s machine_steps_per_mm_e="1600" -s switch_extruder_prime_speed="20" -s acceleration_wall_0="500" -s machine_extruder_end_pos_abs="False" -s jerk_infill="8" -s wall_min_flow_retract="False" -s mold_angle="40" -s magic_fuzzy_skin_thickness="0.3" -s speed_prime_tower="25.0" -s mesh_position_z="0" -s infill_line_distance="6.0" -s support_roof_material_flow="100" -s spaghetti_infill_stepped="True" -s bridge_skin_speed_2="12.5" -s spaghetti_infill_extra_volume="0" -s spaghetti_max_infill_angle="10" -s infill_line_width="0.4" -s travel_avoid_supports="True" -s shell="0" -s roofing_material_flow="100" -s mesh_position_x="0" -s ironing_only_highest_layer="False" -s platform_adhesion="0" -s wall_line_width_x="0.4" -s support_tree_branch_diameter_angle="5" -s support_interface_offset="0.0" -s spaghetti_inset="0.2" -s infill_support_enabled="False" -s infill_sparse_thickness="0.2" -s support_fan_enable="False" -s support_tower_diameter="3.0" -s retraction_hop_enabled="False" -s acceleration_roofing="500" -s material_maximum_park_duration="300" -s top_bottom_pattern="lines" -s wipe_pause="0" -s retraction_count_max="100" -s skin_material_flow="100" -s cool_fan_full_at_height="0.6000000000000001" -s initial_bottom_layers="4" -s extruder_prime_pos_abs="False" -s support_bottom_offset="0.0" -s acceleration_skirt_brim="500" -s raft_interface_line_width="0.8" -s meshfix_extensive_stitching="False" -s clean_between_layers="False" -s cool_min_layer_time="10" -s wipe_repeat_count="5" -s support_skip_some_zags="False" -s bridge_fan_speed_3="0" -s material_print_temperature="200" -s speed_support_roof="25.0" -s conical_overhang_angle="50" -s roofing_angles="[ ]" -s support_tree_branch_diameter="2" -s z_seam_corner="z_seam_corner_weighted" -s jerk_print_layer_0="8" -s support_bottom_material_flow="100" -s speed="0" -s z_seam_position="back" -s default_material_print_temperature="200" -s raft_base_thickness="0.24" -s zig_zaggify_support="False" -s material_adhesion_tendency="0" -s speed_topbottom="25.0" -s wall_thickness="0.8" -s spaghetti_flow="20" -s prime_tower_wipe_enabled="True" -s layer_start_y="0.0" -s material_flow_dependent_temperature="False" -s support_material_flow="100" -s wipe_retraction_prime_speed="45" -s material_shrinkage_percentage="0" -s skin_line_width="0.4" -s wipe_move_distance="20" -s infill_pattern="cubic" -s minimum_interface_area="10" -s infill_before_walls="False" -s zig_zaggify_infill="False" -s retraction_prime_speed="45" -s z_seam_type="back" -s machine_extruder_start_pos_y="0" -s bridge_skin_speed_3="12.5" -s support_infill_sparse_thickness="0.2" -s coasting_enable="False" -s skin_preshrink="0.8" -s ironing_inset="0.2" -s fill_perimeter_gaps="everywhere" -s retraction_amount="5" -s cooling="0" -s travel="0" -s max_extrusion_before_wipe="10" -s speed_wall="25.0" -s coasting_speed="90" -s bottom_thickness="0.8" -s roofing_layer_count="0" -s machine_extruder_cooling_fan_number="0" -s jerk_travel="8" -s coasting_volume="0.064" -s wipe_hop_speed="5" -s support_bottom_enable="True" -s retraction_enable="True" -s infill_sparse_density="20" -s minimum_support_area="2" -s coasting_min_volume="0.8" -s magic_mesh_surface_mode="normal" -s jerk_skirt_brim="8" -s cool_fan_speed_max="100" -s support_interface_angles="[ ]" -s wall_material_flow="100" -s support_interface_pattern="grid" -s raft_fan_speed="0" -s acceleration_infill="500" -s outer_inset_first="False" -s machine_nozzle_size="0.4" -s top_bottom_pattern_0="lines" -s infill_angles="[ ]" -s speed_roofing="25.0" -s wipe_hop_enable="False" -s machine_nozzle_heat_up_speed="2.0" -s support_roof_line_distance="2.4000240002400024" -s brim_outside_only="True" -s infill_offset_y="0" -s support_join_distance="2.0" -s jerk_support_interface="8" -s retraction_hop_after_extruder_switch="True" -s jerk_support_roof="8" -s support_infill_angles="[ ]" -s material_break_preparation_temperature="200" -s speed_print_layer_0="20.0" -s support_line_distance="2.0" -s wall_overhang_angle="90" -s support_interface_skip_height="0.2" -s material_surface_energy="100" -s raft_base_speed="18.75" -s cool_fan_speed="100" -s machine_steps_per_mm_y="50" -s speed_layer_0="20.0" -s top_skin_expand_distance="0.8" -s infill_randomize_start_location="False" -s layer_0_z_overlap="0.15" -s wipe_retraction_speed="45" -s meshfix_union_all="True" -s extruder_prime_pos_x="0" -s cool_fan_enabled="True" -s support_xy_distance="0.8" -s min_infill_area="0" -s support_brim_enable="True" -s layer_start_x="0.0" -s acceleration_print_layer_0="500" -s limit_support_retractions="True" -s ironing_line_spacing="0.1" -s retraction_hop_after_extruder_switch_height="0.2" -s jerk_support_bottom="8" -s conical_overhang_enabled="False" -s material="0" -s expand_skins_expand_distance="0.8" -s support_supported_skin_fan_speed="100" -s machine_nozzle_temp_enabled="True" -s skirt_line_count="3" -s wipe_retraction_retract_speed="45" -s z_seam_relative="False" -s support_roof_angles="[ ]" -s material_anti_ooze_retracted_position="-4" -s top_skin_preshrink="0.8" -s support_interface_material_flow="100" -s support_bottom_line_distance="2.4000240002400024" -s multiple_mesh_overlap="0.15" -s acceleration_prime_tower="500" -s raft_smoothing="5" -s material_break_speed="25" -s material_break_preparation_retracted_position="-16" -s support="0" -s skin_edge_support_layers="0" -s raft_interface_jerk="8" -s infill_wall_line_count="0" -s raft_base_line_spacing="1.6" -s support_connect_zigzags="True" -s material_end_of_filament_purge_length="20" -s bottom_skin_preshrink="0.8" -s machine_nozzle_id="unknown" -s support_bottom_pattern="grid" -s wall_0_wipe_dist="0.0" -s gradual_support_infill_step_height="1" -s skin_angles="[ ]" -s machine_extruder_end_pos_y="0" -s jerk_prime_tower="8" -s raft_speed="25.0" -s support_roof_pattern="grid" -s machine_extruder_end_code="" -s machine_extruder_start_pos_abs="False" -s magic_fuzzy_skin_point_density="1.25" -s support_bottom_stair_step_width="5.0" -s meshfix_maximum_resolution="0.05" -s skirt_brim_material_flow="100" -s support_bottom_angles="[ ]" -s raft_base_line_width="0.8" -s infill="0" -s raft_interface_line_spacing="1.0" -s wipe_brush_pos_x="100" -s raft_surface_acceleration="500" -s bridge_skin_speed="12.5" -s jerk_roofing="8" -s material_break_preparation_speed="2" -s skin_overlap="10.0" -s acceleration_layer_0="500" -s speed_print="50.0" -s brim_replaces_support="False" -s meshfix_maximum_travel_resolution="0.05" -s retraction_speed="45" -s prime_tower_line_width="0.4" -s xy_offset="0" -s support_zag_skip_count="10" -s skirt_gap="10.0" -s cool_fan_full_layer="4" -s infill_enable_travel_optimization="False" -s ironing_enabled="False" -s infill_multiplier="1" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s machine_nozzle_offset_x="0" -s raft_acceleration="500" -s support_interface_density="33.333" -s support_conical_min_width="5.0" -s gradual_infill_step_height="1.5" -s raft_surface_layers="2" -s infill_offset_x="0" -s jerk_wall="8" -s raft_surface_fan_speed="0" -s mold_enabled="False" -s machine_heat_zone_length="16" -s skin_overlap_mm="0.04" -s support_use_towers="False" -s jerk_support_infill="8" -s wipe_retraction_enable="True" -s magic_fuzzy_skin_point_dist="0.8" -s small_feature_max_length="0.0" -s bridge_skin_material_flow="60" -s raft_airgap="0.3" -s brim_line_count="20" -s skin_edge_support_thickness="0" -s wipe_hop_amount="0.2" -s support_brim_line_count="10" -s retract_at_layer_change="False" -s jerk_wall_0="8" -s support_interface_height="0.8" -s retraction_hop="0.2" -s dual="0" -s support_bottom_density="33.333" -s machine_feeder_wheel_diameter="10.0" -s support_brim_width="4" -s support_interface_enable="True" -s switch_extruder_retraction_speed="20" -s bottom_skin_expand_distance="0.8" -s infill_support_angle="40" -s machine_endstop_positive_direction_x="False" -s material_end_of_filament_purge_speed="0.5" -s machine_nozzle_offset_y="0" -s material_flush_purge_length="60" -s raft_base_jerk="8" -s material_anti_ooze_retraction_speed="5" -s support_z_distance="0.2" -s connect_skin_polygons="False" -s roofing_line_width="0.4" -s support_top_distance="0.2" -s infill_overlap_mm="0.12" -s top_thickness="0.8" -s magic_fuzzy_skin_outside_only="False" -s support_wall_count="1" -s jerk_topbottom="8" -s wall_0_inset="0" -s speed_support_interface="25.0" -s jerk_print="8" -s command_line_settings="0" -s acceleration_support_bottom="500" -s support_angle="45" -s cool_min_speed="10" -s machine_min_cool_heat_time_window="50.0" -s center_object="False" -s gradual_infill_steps="0" -s acceleration_support_roof="500" -s retraction_extrusion_window="10" -s material_flow="100" -s raft_surface_speed="25.0" -s jerk_wall_x="8" -s xy_offset_layer_0="0" -s meshfix_union_all_remove_holes="False" -s bridge_wall_speed="12.5" -s support_tower_roof_angle="65" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s minimum_bottom_area="10" -g -e0 -l "0" -s extruder_nr="0"
2020-07-30 03:25:55,350 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [844]: Backend quit with return code 3221225477. Resetting process and socket.
2020-07-30 03:25:55,572 - INFO - [MainThread] UM.Backend.Backend._onSocketError [214]: Backend crashed or closed.
2020-07-30 03:25:55,574 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [227]: Previous socket existed. Closing that first.
2020-07-30 03:25:55,575 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [304]: Attempting to kill the engine process
2020-07-30 03:25:55,578 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [227]: Previous socket existed. Closing that first.
2020-07-30 03:25:55,582 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [184]: Socket state changed to Listening
2020-07-30 03:25:55,587 - INFO - [MainThread] UM.Backend.Backend.startEngine [86]: Started engine process: C:\Program Files\Ultimaker Cura 4.6\CuraEngine.exe
2020-07-30 03:25:55,590 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [106]: [Backend] Calling engine with: ['C:\\Program Files\\Ultimaker Cura 4.6\\CuraEngine.exe', 'connect', '127.0.0.1:49675', '']
2020-07-30 03:25:55,623 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend]
2020-07-30 03:25:55,626 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [188]: Socket state changed to Connected
2020-07-30 03:25:55,628 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [177]: Backend connected on port 49675
2020-07-30 03:25:55,631 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] Cura_SteamEngine version 4.6.2
2020-07-30 03:25:55,634 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] Copyright (C) 2019 Ultimaker
2020-07-30 03:25:55,636 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend]
2020-07-30 03:25:55,638 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] This program is free software: you can redistribute it and/or modify
2020-07-30 03:25:55,641 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-07-30 03:25:55,643 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-07-30 03:25:55,646 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] (at your option) any later version.
2020-07-30 03:25:55,648 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend]
2020-07-30 03:25:55,650 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] This program is distributed in the hope that it will be useful,
2020-07-30 03:25:55,653 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-07-30 03:25:55,655 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2020-07-30 03:25:55,657 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] GNU Affero General Public License for more details.
2020-07-30 03:25:55,660 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend]
2020-07-30 03:25:55,662 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-07-30 03:25:55,664 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] along with this program. If not, see <http://www.gnu.org/licenses/>.
2020-07-30 03:25:58,415 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-07-30 03:26:49,273 - DEBUG - [MainThread] cura.TaskManagement.OnExitCallbackManager.triggerNextCallback [51]: No more on-app-exit callbacks to process. Tell the app to exit.
2020-07-30 03:26:49,277 - INFO - [MainThread] cura.CuraApplication.closeApplication [577]: Close application
2020-07-30 03:26:49,286 - DEBUG - [MainThread] UM.Qt.QtApplication.windowClosed [470]: Shutting down cura
2020-07-30 03:26:49,324 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [304]: Attempting to kill the engine process
2020-07-30 03:26:49,324 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [310]: Killing engine process
2020-07-30 03:26:49,325 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [313]: Engine process is killed. Received return code 1
2020-07-30 03:28:27,240 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin FileLogger
2020-07-30 03:28:27,256 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin FirmwareUpdateChecker
2020-07-30 03:28:27,271 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin FirmwareUpdater
2020-07-30 03:28:27,271 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeGzReader
2020-07-30 03:28:27,287 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeGzWriter
2020-07-30 03:28:27,287 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeProfileReader
2020-07-30 03:28:27,303 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeReader
2020-07-30 03:28:27,303 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeWriter
2020-07-30 03:28:27,318 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin ImageReader
2020-07-30 03:28:27,334 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin LegacyProfileReader
2020-07-30 03:28:27,334 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin LocalContainerProvider
2020-07-30 03:28:27,350 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin LocalFileOutputDevice
2020-07-30 03:28:27,350 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin MachineSettingsAction
2020-07-30 03:28:27,367 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin ModelChecker
2020-07-30 03:28:27,367 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin MonitorStage
2020-07-30 03:28:27,383 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PerObjectSettingsTool
2020-07-30 03:28:27,383 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PostProcessingPlugin
2020-07-30 03:28:27,383 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PrepareStage
2020-07-30 03:28:27,399 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PreviewStage
2020-07-30 03:28:27,414 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin RemovableDriveOutputDevice
2020-07-30 03:28:27,414 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SentryLogger
2020-07-30 03:28:27,430 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SimulationView
2020-07-30 03:28:27,445 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SliceInfoPlugin
2020-07-30 03:28:27,445 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SolidView
2020-07-30 03:28:27,464 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SupportEraser
2020-07-30 03:28:27,493 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace
2020-07-30 03:28:27,494 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None
2020-07-30 03:28:27,495 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace
2020-07-30 03:28:27,497 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None
2020-07-30 03:28:27,499 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace
2020-07-30 03:28:27,501 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None
2020-07-30 03:28:27,503 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace
2020-07-30 03:28:27,504 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None
2020-07-30 03:28:27,510 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin Toolbox
2020-07-30 03:28:27,513 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin CameraTool
2020-07-30 03:28:27,528 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin MirrorTool
2020-07-30 03:28:27,528 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin RotateTool
2020-07-30 03:28:27,544 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin ScaleTool
2020-07-30 03:28:27,544 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SelectionTool
2020-07-30 03:28:27,559 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin TranslateTool
2020-07-30 03:28:27,559 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin TrimeshReader
2020-07-30 03:28:27,575 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UFPReader
2020-07-30 03:28:27,591 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UFPWriter
2020-07-30 03:28:27,591 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UltimakerMachineActions
2020-07-30 03:28:27,703 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UM3NetworkPrinting
2020-07-30 03:28:27,703 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UpdateChecker
2020-07-30 03:28:27,703 - INFO - [Thread-1] UpdateChecker.UpdateCheckerJob.run [40]: Checking for new version of cura
2020-07-30 03:28:27,977 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin USBPrinting
2020-07-30 03:28:28,130 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade21to22
2020-07-30 03:28:28,192 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade22to24
2020-07-30 03:28:28,241 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade25to26
2020-07-30 03:28:28,288 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade26to27
2020-07-30 03:28:28,351 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade27to30
2020-07-30 03:28:28,398 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade30to31
2020-07-30 03:28:28,475 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade32to33
2020-07-30 03:28:28,504 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade33to34
2020-07-30 03:28:28,551 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade34to35
2020-07-30 03:28:28,614 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade35to40
2020-07-30 03:28:28,665 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade40to41
2020-07-30 03:28:28,711 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade41to42
2020-07-30 03:28:28,727 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade42to43
2020-07-30 03:28:28,727 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade43to44
2020-07-30 03:28:28,743 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade44to45
2020-07-30 03:28:28,758 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade45to46
2020-07-30 03:28:28,758 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade460to462
2020-07-30 03:28:28,774 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SimpleView
2020-07-30 03:28:28,790 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin X3DReader
2020-07-30 03:28:28,790 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin XmlMaterialProfile
2020-07-30 03:28:28,805 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin XRayView
2020-07-30 03:28:28,805 - DEBUG - [MainThread] UM.PluginRegistry.loadPlugins [374]: Loading all plugins took 2.096127510070801 seconds
2020-07-30 03:28:28,821 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [160]: Looking for old configuration files to upgrade.
2020-07-30 03:28:28,836 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:28:28,852 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:28:28,852 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:28:28,852 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:28:28,852 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:28:28,852 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:28:28,868 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:28:28,868 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:28:28,868 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:28:28,868 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:28:28,868 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:28:28,868 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:28:28,883 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:28:28,883 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:28:28,883 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:28:28,883 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:28:28,883 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:28:28,899 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:28:28,899 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:28:28,899 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:28:28,899 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:28:28,899 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:28:28,915 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:28:28,915 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:28:28,915 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:28:28,915 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:28:28,930 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:28:28,930 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:28:28,930 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:28:28,930 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:28:31,469 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [360]: Loading metadata into container registry took 2.429734945297241 seconds
2020-07-30 03:28:31,594 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [111]: Select build plate: 0
2020-07-30 03:28:31,594 - INFO - [MainThread] cura.CuraApplication.run [751]: Initializing machine error checker
2020-07-30 03:28:31,910 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [72]: Default machine actions added for machine definition [creality_ender3]
2020-07-30 03:28:32,229 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [184]: Extruder[creality_base_extruder_0 #2] added to [Creality Ender-3] at position [0]
2020-07-30 03:28:32,229 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [creality_base_extruder_0 #2] has already been registered on machine [Creality Ender-3], not doing anything
2020-07-30 03:28:32,229 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [74]: No machine with name Creality Ender-3 in list of firmware to check.
2020-07-30 03:28:32,652 - DEBUG - [MainThread] cura.Machines.ContainerTree.__getitem__ [106]: Adding container tree for creality_ender3 took 0.4233269691467285 seconds.
2020-07-30 03:28:32,652 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: BQ_PauseAtHeight
2020-07-30 03:28:32,652 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: ChangeAtZ
2020-07-30 03:28:32,652 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: ColorMix
2020-07-30 03:28:32,652 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: DisplayFilenameAndLayerOnLCD
2020-07-30 03:28:32,668 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: DisplayRemainingTimeOnLCD
2020-07-30 03:28:32,668 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: FilamentChange
2020-07-30 03:28:32,668 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: InsertAtLayerChange
2020-07-30 03:28:32,668 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: PauseAtHeight
2020-07-30 03:28:32,668 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: PauseAtHeightRepRapFirmwareDuet
2020-07-30 03:28:32,668 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: PauseAtHeightforRepetier
2020-07-30 03:28:32,668 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: RetractContinue
2020-07-30 03:28:32,668 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: SearchAndReplace
2020-07-30 03:28:32,668 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: Stretch
2020-07-30 03:28:32,668 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: TimeLapse
2020-07-30 03:28:32,668 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: UsePreviousProbeMeasurements
2020-07-30 03:28:32,746 - INFO - [MainThread] cura.CuraApplication.run [756]: Initializing machine manager
2020-07-30 03:28:32,746 - INFO - [MainThread] cura.CuraApplication.run [761]: Initializing container manager
2020-07-30 03:28:32,746 - INFO - [Thread-2] STLReader.STLReader.load_file [52]: Using NumPy-STL to load STL data.
2020-07-30 03:28:32,761 - DEBUG - [Thread-2] UM.Mesh.MeshData.calculateNormalsFromVertices [548]: Calculating normals took 0.0 seconds
2020-07-30 03:28:32,761 - DEBUG - [Thread-2] STLReader.STLReader._read [104]: Loaded a mesh with 8520 vertices
2020-07-30 03:28:32,824 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [255]: Changing perspective mode to perspective.
2020-07-30 03:28:32,840 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: C:\Program Files\Ultimaker Cura 4.6\resources\themes\cura-light\theme.json
2020-07-30 03:28:33,068 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme C:\Program Files\Ultimaker Cura 4.6\resources\themes\cura-light
2020-07-30 03:28:33,443 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-07-30 03:28:33,913 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [311]: Creating post processing plugin view.
2020-07-30 03:28:34,038 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [321]: Post processing view created.
2020-07-30 03:28:34,134 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [89]: There was no auth data or access token
2020-07-30 03:28:34,134 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [89]: There was no auth data or access token
2020-07-30 03:28:34,134 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [89]: There was no auth data or access token
2020-07-30 03:28:35,216 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-07-30 03:28:35,216 - WARNING - [MainThread] UM.Decorators.deprecated_function [23]: <function GlobalStack.extruders at 0x0000020BAB8DE510> is deprecated (since 4.4): Please use extruderList instead.
2020-07-30 03:28:35,325 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:76:29: Unable to assign null to double
2020-07-30 03:28:35,341 - DEBUG - [MainThread] UM.Controller.setActiveStage [180]: Setting active stage to PrepareStage
2020-07-30 03:28:35,403 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-07-30 03:28:35,435 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/ActionButton.qml:101: ReferenceError: contentWidth is not defined
2020-07-30 03:28:35,435 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/ActionButton.qml:101: ReferenceError: contentWidth is not defined
2020-07-30 03:28:35,466 - DEBUG - [MainThread] UM.Controller.setActiveView [108]: Setting active view to SolidView
2020-07-30 03:28:35,466 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [111]: Creating model checker view.
2020-07-30 03:28:35,482 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [120]: Model checker view created.
2020-07-30 03:28:35,482 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [71]: Creating dialog [MoreInfoWindow.qml]
2020-07-30 03:28:35,497 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [542]: Requesting [updates] metadata from server.
2020-07-30 03:28:35,497 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [112]: No auth data to retrieve the access_token from
2020-07-30 03:28:35,513 - WARNING - [MainThread] UM.Logger.warning [128]: Cannot add authorization to Cloud Api request
2020-07-30 03:28:35,513 - DEBUG - [MainThread] cura.CuraApplication.run [799]: Booting Cura took 9.29615831375122 seconds
2020-07-30 03:28:35,513 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [346]: Request [cec5b5724b7941d39fa60aade141703d] started
2020-07-30 03:28:35,528 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [317]: No more requests to process, stop
2020-07-30 03:28:35,544 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-07-30 03:28:35,544 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-07-30 03:28:35,991 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-07-30 03:28:35,995 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-07-30 03:28:36,261 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [207]: Support for Vertex Array Objects: True
2020-07-30 03:28:36,269 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [112]: Initialized OpenGL subsystems.
2020-07-30 03:28:36,271 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [113]: OpenGL Version: 4.1.0 - Build 26.20.100.7324
2020-07-30 03:28:36,274 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [114]: OpenGL Vendor: Intel
2020-07-30 03:28:36,277 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [115]: OpenGL Renderer: Intel(R) UHD Graphics 630
2020-07-30 03:28:36,279 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [116]: GLSL Version: 4.10.0
2020-07-30 03:28:36,282 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\default.shader]...
2020-07-30 03:28:36,295 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\selection.shader]...
2020-07-30 03:28:36,305 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\select_face.shader]...
2020-07-30 03:28:36,316 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\default.shader]...
2020-07-30 03:28:36,327 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\composite.shader]...
2020-07-30 03:28:36,344 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\overhang.shader]...
2020-07-30 03:28:36,362 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\striped.shader]...
2020-07-30 03:28:36,378 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\transparent_object.shader]...
2020-07-30 03:28:36,390 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\striped.shader]...
2020-07-30 03:28:36,406 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\xray.shader]...
2020-07-30 03:28:36,415 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\xray_composite.shader]...
2020-07-30 03:28:36,433 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\default.shader]...
2020-07-30 03:28:36,443 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\grid.shader]...
2020-07-30 03:28:36,455 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\platform.shader]...
2020-07-30 03:28:36,488 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\xray.shader]...
2020-07-30 03:28:37,021 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [408]: Request [cec5b5724b7941d39fa60aade141703d] finished.
2020-07-30 03:28:37,024 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [317]: No more requests to process, stop
2020-07-30 03:28:37,144 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 3.7s
2020-07-30 03:28:42,503 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [237]: Starting to slice...
2020-07-30 03:28:42,503 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [255]: Going to slice build plate [0]!
2020-07-30 03:28:42,504 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [263]: Build plate 0 has no objects to be sliced, skipping
2020-07-30 03:28:43,008 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [237]: Starting to slice...
2020-07-30 03:28:43,009 - WARNING - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [241]: Slice unnecessary, nothing has changed that needs reslicing.
2020-07-30 03:28:52,509 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-07-30 03:28:54,559 - DEBUG - [MainThread] cura.TaskManagement.OnExitCallbackManager.triggerNextCallback [51]: No more on-app-exit callbacks to process. Tell the app to exit.
2020-07-30 03:28:54,563 - INFO - [MainThread] cura.CuraApplication.closeApplication [577]: Close application
2020-07-30 03:28:54,576 - DEBUG - [MainThread] UM.Qt.QtApplication.windowClosed [470]: Shutting down cura
2020-07-30 03:28:54,609 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [304]: Attempting to kill the engine process
2020-07-30 03:28:54,609 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [310]: Killing engine process
2020-07-30 03:28:54,611 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [313]: Engine process is killed. Received return code 1
2020-07-30 03:28:58,509 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin FileLogger
2020-07-30 03:28:58,520 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin FirmwareUpdateChecker
2020-07-30 03:28:58,528 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin FirmwareUpdater
2020-07-30 03:28:58,534 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeGzReader
2020-07-30 03:28:58,541 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeGzWriter
2020-07-30 03:28:58,549 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeProfileReader
2020-07-30 03:28:58,564 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeReader
2020-07-30 03:28:58,571 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin GCodeWriter
2020-07-30 03:28:58,581 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin ImageReader
2020-07-30 03:28:58,589 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin LegacyProfileReader
2020-07-30 03:28:58,597 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin LocalContainerProvider
2020-07-30 03:28:58,606 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin LocalFileOutputDevice
2020-07-30 03:28:58,614 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin MachineSettingsAction
2020-07-30 03:28:58,622 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin ModelChecker
2020-07-30 03:28:58,630 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin MonitorStage
2020-07-30 03:28:58,639 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PerObjectSettingsTool
2020-07-30 03:28:58,647 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PostProcessingPlugin
2020-07-30 03:28:58,654 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PrepareStage
2020-07-30 03:28:58,660 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin PreviewStage
2020-07-30 03:28:58,673 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin RemovableDriveOutputDevice
2020-07-30 03:28:58,679 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SentryLogger
2020-07-30 03:28:58,695 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SimulationView
2020-07-30 03:28:58,703 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SliceInfoPlugin
2020-07-30 03:28:58,714 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SolidView
2020-07-30 03:28:58,722 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SupportEraser
2020-07-30 03:28:58,745 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace
2020-07-30 03:28:58,745 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None
2020-07-30 03:28:58,745 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace
2020-07-30 03:28:58,755 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None
2020-07-30 03:28:58,755 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace
2020-07-30 03:28:58,755 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None
2020-07-30 03:28:58,755 - WARNING - [MainThread] UM.Logger.logException [106]: Exception: Failed to load packages for Marketplace
2020-07-30 03:28:58,755 - WARNING - [MainThread] UM.Logger.logException [110]: NoneType: None
2020-07-30 03:28:58,765 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin Toolbox
2020-07-30 03:28:58,775 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin CameraTool
2020-07-30 03:28:58,785 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin MirrorTool
2020-07-30 03:28:58,802 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin RotateTool
2020-07-30 03:28:58,817 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin ScaleTool
2020-07-30 03:28:58,821 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SelectionTool
2020-07-30 03:28:58,825 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin TranslateTool
2020-07-30 03:28:58,840 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin TrimeshReader
2020-07-30 03:28:58,845 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UFPReader
2020-07-30 03:28:58,855 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UFPWriter
2020-07-30 03:28:58,865 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UltimakerMachineActions
2020-07-30 03:28:58,965 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UM3NetworkPrinting
2020-07-30 03:28:58,965 - INFO - [Thread-1] UpdateChecker.UpdateCheckerJob.run [40]: Checking for new version of cura
2020-07-30 03:28:58,975 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin UpdateChecker
2020-07-30 03:28:59,329 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin USBPrinting
2020-07-30 03:28:59,534 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade21to22
2020-07-30 03:28:59,600 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade22to24
2020-07-30 03:28:59,666 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade25to26
2020-07-30 03:28:59,727 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade26to27
2020-07-30 03:28:59,790 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade27to30
2020-07-30 03:28:59,854 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade30to31
2020-07-30 03:28:59,920 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade32to33
2020-07-30 03:28:59,970 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade33to34
2020-07-30 03:28:59,985 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade34to35
2020-07-30 03:28:59,994 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade35to40
2020-07-30 03:29:00,003 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade40to41
2020-07-30 03:29:00,013 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade41to42
2020-07-30 03:29:00,022 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade42to43
2020-07-30 03:29:00,030 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade43to44
2020-07-30 03:29:00,039 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade44to45
2020-07-30 03:29:00,048 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade45to46
2020-07-30 03:29:00,056 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin VersionUpgrade460to462
2020-07-30 03:29:00,063 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin SimpleView
2020-07-30 03:29:00,077 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin X3DReader
2020-07-30 03:29:00,099 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin XmlMaterialProfile
2020-07-30 03:29:00,107 - INFO - [MainThread] UM.Logger.info [122]: Loaded plugin XRayView
2020-07-30 03:29:00,109 - DEBUG - [MainThread] UM.PluginRegistry.loadPlugins [374]: Loading all plugins took 2.1176958084106445 seconds
2020-07-30 03:29:00,120 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [160]: Looking for old configuration files to upgrade.
2020-07-30 03:29:00,145 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:29:00,149 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:29:00,152 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:29:00,155 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:29:00,158 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:29:00,160 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:29:00,162 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:29:00,165 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:29:00,165 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:29:00,171 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:29:00,174 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:29:00,177 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:29:00,181 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:29:00,183 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:29:00,186 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:29:00,188 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:29:00,191 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:29:00,195 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:29:00,198 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:29:00,200 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:29:00,203 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:29:00,205 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:29:00,205 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:29:00,211 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:29:00,214 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:29:00,217 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:29:00,223 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:29:00,228 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:29:00,234 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\packages.json, skip it
2020-07-30 03:29:00,240 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [328]: Failed to get file version: .\plugins.json, skip it
2020-07-30 03:29:00,771 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [237]: Starting to slice...
2020-07-30 03:29:00,772 - WARNING - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [241]: Slice unnecessary, nothing has changed that needs reslicing.
2020-07-30 03:29:02,916 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [360]: Loading metadata into container registry took 2.5581002235412598 seconds
2020-07-30 03:29:03,100 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [111]: Select build plate: 0
2020-07-30 03:29:03,105 - INFO - [MainThread] cura.CuraApplication.run [751]: Initializing machine error checker
2020-07-30 03:29:03,229 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [72]: Default machine actions added for machine definition [creality_ender3]
2020-07-30 03:29:03,337 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [184]: Extruder[creality_base_extruder_0 #2] added to [Creality Ender-3] at position [0]
2020-07-30 03:29:03,340 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [creality_base_extruder_0 #2] has already been registered on machine [Creality Ender-3], not doing anything
2020-07-30 03:29:03,340 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [74]: No machine with name Creality Ender-3 in list of firmware to check.
2020-07-30 03:29:03,819 - DEBUG - [MainThread] cura.Machines.ContainerTree.__getitem__ [106]: Adding container tree for creality_ender3 took 0.47146105766296387 seconds.
2020-07-30 03:29:03,823 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: BQ_PauseAtHeight
2020-07-30 03:29:03,826 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: ChangeAtZ
2020-07-30 03:29:03,828 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: ColorMix
2020-07-30 03:29:03,829 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: DisplayFilenameAndLayerOnLCD
2020-07-30 03:29:03,830 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: DisplayRemainingTimeOnLCD
2020-07-30 03:29:03,831 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: FilamentChange
2020-07-30 03:29:03,833 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: InsertAtLayerChange
2020-07-30 03:29:03,835 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: PauseAtHeight
2020-07-30 03:29:03,836 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: PauseAtHeightRepRapFirmwareDuet
2020-07-30 03:29:03,838 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: PauseAtHeightforRepetier
2020-07-30 03:29:03,839 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: RetractContinue
2020-07-30 03:29:03,841 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: SearchAndReplace
2020-07-30 03:29:03,844 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: Stretch
2020-07-30 03:29:03,845 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: TimeLapse
2020-07-30 03:29:03,846 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [180]: Begin loading of script: UsePreviousProbeMeasurements
2020-07-30 03:29:03,916 - INFO - [MainThread] cura.CuraApplication.run [756]: Initializing machine manager
2020-07-30 03:29:03,919 - INFO - [MainThread] cura.CuraApplication.run [761]: Initializing container manager
2020-07-30 03:29:03,923 - INFO - [Thread-2] STLReader.STLReader.load_file [52]: Using NumPy-STL to load STL data.
2020-07-30 03:29:03,929 - DEBUG - [Thread-2] UM.Mesh.MeshData.calculateNormalsFromVertices [548]: Calculating normals took 0.0 seconds
2020-07-30 03:29:03,931 - DEBUG - [Thread-2] STLReader.STLReader._read [104]: Loaded a mesh with 8520 vertices
2020-07-30 03:29:04,002 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [255]: Changing perspective mode to perspective.
2020-07-30 03:29:04,025 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: C:\Program Files\Ultimaker Cura 4.6\resources\themes\cura-dark\theme.json
2020-07-30 03:29:04,028 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: C:\Program Files\Ultimaker Cura 4.6\resources\themes\cura-light\theme.json
2020-07-30 03:29:04,255 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme C:\Program Files\Ultimaker Cura 4.6\resources\themes\cura-light
2020-07-30 03:29:04,255 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme C:\Program Files\Ultimaker Cura 4.6\resources\themes\cura-dark
2020-07-30 03:29:04,630 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-07-30 03:29:05,185 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [311]: Creating post processing plugin view.
2020-07-30 03:29:05,327 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [321]: Post processing view created.
2020-07-30 03:29:05,425 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [89]: There was no auth data or access token
2020-07-30 03:29:05,435 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [89]: There was no auth data or access token
2020-07-30 03:29:05,435 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [89]: There was no auth data or access token
2020-07-30 03:29:06,525 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-07-30 03:29:06,525 - WARNING - [MainThread] UM.Decorators.deprecated_function [23]: <function GlobalStack.extruders at 0x00000211BBA9E510> is deprecated (since 4.4): Please use extruderList instead.
2020-07-30 03:29:06,635 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:76:29: Unable to assign null to double
2020-07-30 03:29:06,645 - DEBUG - [MainThread] UM.Controller.setActiveStage [180]: Setting active stage to PrepareStage
2020-07-30 03:29:06,725 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-07-30 03:29:06,755 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/ActionButton.qml:101: ReferenceError: contentWidth is not defined
2020-07-30 03:29:06,755 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [406]: file:///C:/Program Files/Ultimaker Cura 4.6/resources/qml/ActionButton.qml:101: ReferenceError: contentWidth is not defined
2020-07-30 03:29:06,785 - DEBUG - [MainThread] UM.Controller.setActiveView [108]: Setting active view to SolidView
2020-07-30 03:29:06,795 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [111]: Creating model checker view.
2020-07-30 03:29:06,795 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [120]: Model checker view created.
2020-07-30 03:29:06,795 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [71]: Creating dialog [MoreInfoWindow.qml]
2020-07-30 03:29:06,825 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [542]: Requesting [updates] metadata from server.
2020-07-30 03:29:06,825 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [112]: No auth data to retrieve the access_token from
2020-07-30 03:29:06,825 - WARNING - [MainThread] UM.Logger.warning [128]: Cannot add authorization to Cloud Api request
2020-07-30 03:29:06,835 - DEBUG - [MainThread] cura.CuraApplication.run [799]: Booting Cura took 9.39784550666809 seconds
2020-07-30 03:29:06,845 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [346]: Request [49da1f969ba84816bb7dba79b269535b] started
2020-07-30 03:29:06,845 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [317]: No more requests to process, stop
2020-07-30 03:29:06,855 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-07-30 03:29:06,875 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-07-30 03:29:07,362 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-07-30 03:29:07,366 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-07-30 03:29:07,592 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [207]: Support for Vertex Array Objects: True
2020-07-30 03:29:07,601 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [112]: Initialized OpenGL subsystems.
2020-07-30 03:29:07,604 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [113]: OpenGL Version: 4.1.0 - Build 26.20.100.7324
2020-07-30 03:29:07,606 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [114]: OpenGL Vendor: Intel
2020-07-30 03:29:07,609 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [115]: OpenGL Renderer: Intel(R) UHD Graphics 630
2020-07-30 03:29:07,611 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [116]: GLSL Version: 4.10.0
2020-07-30 03:29:07,613 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\default.shader]...
2020-07-30 03:29:07,628 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\selection.shader]...
2020-07-30 03:29:07,642 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\select_face.shader]...
2020-07-30 03:29:07,655 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\default.shader]...
2020-07-30 03:29:07,670 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\composite.shader]...
2020-07-30 03:29:07,692 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\overhang.shader]...
2020-07-30 03:29:07,715 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\striped.shader]...
2020-07-30 03:29:07,736 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\transparent_object.shader]...
2020-07-30 03:29:07,750 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\striped.shader]...
2020-07-30 03:29:07,770 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\xray.shader]...
2020-07-30 03:29:07,783 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\xray_composite.shader]...
2020-07-30 03:29:07,804 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\default.shader]...
2020-07-30 03:29:07,819 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\grid.shader]...
2020-07-30 03:29:07,833 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\platform.shader]...
2020-07-30 03:29:07,869 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\xray.shader]...
2020-07-30 03:29:08,489 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 3.9s
2020-07-30 03:29:10,125 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [408]: Request [49da1f969ba84816bb7dba79b269535b] finished.
2020-07-30 03:29:10,125 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [317]: No more requests to process, stop
2020-07-30 03:29:16,841 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-07-30 03:29:28,506 - INFO - [Thread-4] STLReader.STLReader.load_file [52]: Using NumPy-STL to load STL data.
2020-07-30 03:29:28,838 - DEBUG - [Thread-4] UM.Mesh.MeshData.calculateNormalsFromVertices [548]: Calculating normals took 0.1376330852508545 seconds
2020-07-30 03:29:28,889 - DEBUG - [Thread-4] STLReader.STLReader._read [104]: Loaded a mesh with 4670010 vertices
2020-07-30 03:29:29,935 - DEBUG - [Thread-4] UM.Mesh.MeshData.approximateConvexHull [503]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 1.0363752841949463 seconds. 6444 input vertices. 6444 output vertices.
2020-07-30 03:29:30,575 - DEBUG - [Thread-4] UM.FileHandler.ReadFileJob.run [71]: Loading file took 2.1 seconds
2020-07-30 03:29:31,565 - DEBUG - [Thread-4] UM.Mesh.MeshData.approximateConvexHull [503]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.9870142936706543 seconds. 6443 input vertices. 6443 output vertices.
2020-07-30 03:29:31,588 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x00000211CA8CD4E0>, took 0ms
2020-07-30 03:29:32,184 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [237]: Starting to slice...
2020-07-30 03:29:32,184 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [255]: Going to slice build plate [0]!
2020-07-30 03:29:32,189 - WARNING - [Thread-5] UM.Decorators.deprecated_function [23]: <function GlobalStack.extruders at 0x00000211BBA9E510> is deprecated (since 4.4): Please use extruderList instead.
2020-07-30 03:29:32,191 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [58]: Loading shader file [C:\Program Files\Ultimaker Cura 4.6\resources\shaders\transparent_object.shader]...
2020-07-30 03:29:32,630 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [444]: Sending slice message took 0.4448084831237793 seconds
2020-07-30 03:29:34,457 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] [WARNING] Mesh has disconnected faces!
2020-07-30 03:29:34,460 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] [WARNING] Mesh has overlapping faces!
2020-07-30 03:29:35,403 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] [WARNING] -s acceleration_support_infill="500" -s machine_settings="0" -s material_flow_dependent_temperature="False" -s retraction_retract_speed="25" -s wireframe_up_half_speed="0.3" -s support_type="everywhere" -s hole_xy_offset="0" -s z_seam_x="117.5" -s skirt_brim_speed="20.0" -s prime_tower_enable="False" -s infill_overlap_mm="0.12" -s infill_support_enabled="False" -s support_xy_distance="0.8" -s cool_fan_enabled="True" -s ironing_pattern="zigzag" -s machine_max_acceleration_y="500" -s jerk_topbottom="8" -s jerk_wall_0="8" -s ironing_line_spacing="0.1" -s speed_ironing="16.666666666666668" -s raft_base_line_width="0.8" -s wireframe_top_jump="0.6" -s machine_steps_per_mm_z="50" -s gradual_support_infill_step_height="1" -s wireframe_top_delay="0" -s support_skip_zag_per_mm="20" -s fill_outline_gaps="False" -s wireframe_drag_along="0.6" -s magic_fuzzy_skin_thickness="0.3" -s cool_min_layer_time_fan_speed_max="10" -s default_material_bed_temperature="50" -s acceleration_ironing="500" -s jerk_support_bottom="8" -s raft_interface_thickness="0.30000000000000004" -s infill_pattern="cubic" -s raft_surface_layers="2" -s travel="0" -s max_extrusion_before_wipe="10" -s wireframe_printspeed_bottom="5" -s mesh_position_y="0" -s small_feature_max_length="0.0" -s acceleration_layer_0="500" -s skin_overlap="10.0" -s skirt_line_count="3" -s wipe_hop_speed="5" -s default_material_print_temperature="210" -s support_tower_maximum_supported_diameter="3.0" -s jerk_print_layer_0="8" -s jerk_enabled="False" -s flow_rate_max_extrusion_offset="0" -s machine_buildplate_type="glass" -s brim_gap="0" -s skin_no_small_gaps_heuristic="False" -s xy_offset="0" -s cool_fan_speed_0="0" -s acceleration_wall_0="500" -s machine_heated_build_volume="False" -s machine_name="Creality Ender-3" -s wireframe_roof_fall_down="2" -s machine_max_jerk_e="5" -s speed_support_infill="25.0" -s wall_line_width_x="0.4" -s bridge_skin_support_threshold="50" -s jerk_travel="8" -s material_anti_ooze_retraction_speed="5" -s infill_line_distance="6.0" -s switch_extruder_prime_speed="20" -s cool_lift_head="False" -s support_interface_line_width="0.4" -s wall_x_material_flow="100" -s travel_compensate_overlapping_walls_enabled="True" -s small_hole_max_size="0" -s material_bed_temperature="50" -s support_line_width="0.4" -s wireframe_printspeed_up="5" -s support_interface_offset="0.0" -s minimum_roof_area="10" -s cool_fan_full_layer="4" -s infill_enable_travel_optimization="False" -s bridge_skin_speed_3="12.5" -s jerk_skirt_brim="8" -s support_brim_line_count="10" -s acceleration_support="500" -s travel_retract_before_outer_wall="True" -s wall_0_wipe_dist="0.0" -s wipe_hop_amount="0.2" -s top_layers="4" -s skirt_brim_line_width="0.4" -s support_infill_extruder_nr="0" -s speed_equalize_flow_max="150" -s wall_overhang_angle="90" -s speed_infill="50.0" -s draft_shield_enabled="False" -s prime_tower_line_width="0.4" -s retraction_combing_max_distance="30" -s material_adhesion_tendency="10" -s support_bottom_distance="0.2" -s acceleration_wall="500" -s machine_depth="235" -s raft_base_jerk="8" -s time="03:29:32" -s bridge_skin_material_flow_2="100" -s machine_endstop_positive_direction_y="False" -s extruder_prime_pos_z="0" -s machine_nozzle_expansion_angle="45" -s clean_between_layers="False" -s support_roof_extruder_nr="0" -s material_print_temperature_layer_0="210" -s travel_avoid_distance="0.625" -s line_width="0.4" -s roofing_material_flow="100" -s wipe_retraction_retract_speed="25" -s travel_avoid_other_parts="True" -s z_seam_y="235" -s wireframe_printspeed_down="5" -s support_top_distance="0.2" -s machine_endstop_positive_direction_z="True" -s prime_tower_min_volume="6" -s wireframe_roof_inset="3" -s skin_material_flow="100" -s support_bottom_pattern="grid" -s machine_nozzle_id="unknown" -s resolution="0" -s prime_tower_position_y="203.6" -s machine_max_feedrate_z="10" -s minimum_polygon_circumference="1.0" -s jerk_ironing="8" -s ooze_shield_dist="2" -s wireframe_height="3" -s layer_height="0.2" -s machine_show_variants="False" -s wall_thickness="0.8" -s spaghetti_inset="0.2" -s material_initial_print_temperature="210" -s filter_out_tiny_gaps="False" -s wireframe_nozzle_clearance="1" -s material_no_load_move_factor="0.940860215" -s speed_travel="150.0" -s mold_roof_height="0.5" -s top_skin_preshrink="0.8" -s draft_shield_dist="10" -s wireframe_fall_down="0.5" -s machine_height="250" -s support_tree_angle="40" -s initial_extruder_nr="0" -s nozzle_disallowed_areas="[]" -s meshfix_maximum_resolution="0.05" -s retraction_prime_speed="25" -s z_seam_type="back" -s acceleration_enabled="False" -s material_surface_energy="100" -s support_extruder_nr_layer_0="0" -s support_supported_skin_fan_speed="100" -s minimum_support_area="2" -s bottom_thickness="0.8" -s wireframe_bottom_delay="0" -s initial_layer_line_width_factor="100.0" -s wall_line_count="2" -s mold_angle="40" -s machine_max_acceleration_z="100" -s acceleration_print="500" -s material_standby_temperature="150" -s support_roof_density="33.333" -s magic_mesh_surface_mode="normal" -s coasting_min_volume="0.8" -s mold_enabled="False" -s skin_outline_count="1" -s acceleration_topbottom="500" -s layer_start_x="0.0" -s min_infill_area="0" -s support_brim_enable="True" -s infill_overlap="30.0" -s wireframe_straight_before_down="20" -s bridge_skin_density_2="75" -s support_bottom_line_width="0.4" -s acceleration_support_roof="500" -s bridge_skin_speed_2="12.5" -s retraction_hop_after_extruder_switch="True" -s jerk_support_interface="8" -s jerk_layer_0="8" -s switch_extruder_retraction_speeds="20" -s machine_disallowed_areas="[[[-117.5, 117.5], [-117.5, 108], [117.5, 108], [117.5, 117.5]], [[-117.5, -108], [-117.5, -117.5], [117.5, -117.5], [117.5, -108]]]" -s raft_base_fan_speed="0" -s speed_print_layer_0="20.0" -s support_line_distance="2.0" -s machine_shape="rectangular" -s support_roof_offset="0.0" -s cross_infill_density_image="" -s brim_outside_only="True" -s support_roof_line_distance="2.4000240002400024" -s support_roof_enable="True" -s raft_surface_jerk="8" -s speed_z_hop="5" -s material_maximum_park_duration="300" -s top_bottom_pattern="lines" -s machine_max_feedrate_y="500" -s support_mesh_drop_down="True" -s raft_interface_fan_speed="0" -s top_bottom_thickness="0.8" -s support_tree_branch_diameter="2" -s roofing_angles="[ ]" -s z_seam_corner="z_seam_corner_weighted" -s carve_multiple_volumes="False" -s retraction_amount="6.5" -s fill_perimeter_gaps="everywhere" -s infill_material_flow="100" -s bridge_skin_density="100" -s material_print_temp_wait="True" -s support_bottom_height="0.8" -s gantry_height="25" -s support_interface_skip_height="0.2" -s infill_sparse_thickness="0.2" -s support_fan_enable="False" -s prime_tower_position_x="223.6" -s raft_surface_thickness="0.2" -s small_feature_speed_factor_0="50" -s wipe_retraction_amount="6.5" -s machine_minimum_feedrate="0.0" -s machine_steps_per_mm_y="50" -s cool_fan_speed="100.0" -s infill_multiplier="1" -s support_tree_branch_diameter_angle="5" -s wireframe_flow_connection="100" -s material_flush_purge_length="60" -s adaptive_layer_height_variation="0.04" -s flow_rate_extrusion_offset_factor="100" -s support_tower_diameter="3.0" -s material_end_of_filament_purge_speed="0.5" -s retraction_min_travel="1.5" -s magic_fuzzy_skin_outside_only="False" -s travel_compensate_overlapping_walls_x_enabled="True" -s support_bottom_material_flow="100" -s infill_extruder_nr="-1" -s wireframe_enabled="False" -s material_diameter="1.75" -s outer_inset_first="False" -s center_object="False" -s raft_smoothing="5" -s jerk_support="8" -s adhesion_extruder_nr="0" -s relative_extrusion="False" -s material_bed_temp_prepend="True" -s raft_interface_speed="18.75" -s wall_line_width_0="0.4" -s skirt_gap="10.0" -s support_zag_skip_count="10" -s wipe_pause="0" -s retraction_count_max="100" -s extruder_prime_pos_abs="False" -s ooze_shield_angle="60" -s adaptive_layer_height_variation_step="0.04" -s machine_end_gcode="G91 ;Relative positioning
2020-07-30 03:29:35,405 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 E-2 F2700 ;Retract a bit
2020-07-30 03:29:35,407 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 E-2 Z0.2 F2400 ;Retract and raise Z
2020-07-30 03:29:35,410 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X5 Y5 F3000 ;Wipe out
2020-07-30 03:29:35,413 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 Z10 ;Raise Z more
2020-07-30 03:29:35,415 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G90 ;Absolute positionning
2020-07-30 03:29:35,418 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend]
2020-07-30 03:29:35,420 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X0 Y235 ;Present print
2020-07-30 03:29:35,422 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] M106 S0 ;Turn-off fan
2020-07-30 03:29:35,425 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] M104 S0 ;Turn-off hotend
2020-07-30 03:29:35,427 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] M140 S0 ;Turn-off bed
2020-07-30 03:29:35,430 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend]
2020-07-30 03:29:35,432 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] M84 X Y E ;Disable all steppers but Z
2020-07-30 03:29:35,434 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] " -s raft_base_thickness="0.24" -s zig_zaggify_support="False" -s material_crystallinity="False" -s raft_base_line_spacing="1.6" -s raft_airgap="0.3" -s bridge_skin_material_flow="60" -s wireframe_printspeed="5" -s cutting_mesh="False" -s material_extrusion_cool_down_speed="0.7" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s material_guid="" -s connect_infill_polygons="False" -s support_xy_overrides_z="xy_overrides_z" -s skirt_brim_minimal_length="250" -s spaghetti_infill_extra_volume="0" -s spaghetti_max_infill_angle="10" -s support_interface_extruder_nr="0" -s infill_line_width="0.4" -s prime_tower_brim_enable="False" -s bottom_layers="4" -s meshfix="0" -s speed_wall_0="25.0" -s wall_x_extruder_nr="-1" -s coasting_volume="0.064" -s shell="0" -s travel_avoid_supports="True" -s material_end_of_filament_purge_length="20" -s support_connect_zigzags="True" -s support_bottom_offset="0.0" -s support_interface_enable="True" -s support_brim_width="4" -s support_roof_height="0.8" -s prime_tower_size="20" -s remove_empty_first_layers="True" -s support_roof_line_width="0.4" -s optimize_wall_printing_order="True" -s raft_base_speed="18.75" -s machine_heat_zone_length="16" -s date="30-07-2020" -s machine_start_gcode="; Ender 3 Custom Start G-code
2020-07-30 03:29:35,436 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G92 E0 ; Reset Extruder
2020-07-30 03:29:35,437 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G28 ; Home all axes
2020-07-30 03:29:35,440 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
2020-07-30 03:29:35,442 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
2020-07-30 03:29:35,445 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
2020-07-30 03:29:35,447 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
2020-07-30 03:29:35,449 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
2020-07-30 03:29:35,452 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G92 E0 ; Reset Extruder
2020-07-30 03:29:35,454 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
2020-07-30 03:29:35,457 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish" -s machine_max_acceleration_e="5000" -s acceleration_roofing="500" -s retraction_hop_enabled="False" -s spaghetti_infill_stepped="True" -s support_roof_material_flow="100" -s machine_steps_per_mm_e="1600" -s wall_0_extruder_nr="-1" -s machine_firmware_retract="False" -s infill_support_angle="40" -s material_bed_temperature_layer_0="50" -s roofing_layer_count="0" -s speed_slowdown_layers="2" -s speed_topbottom="25.0" -s wireframe_strategy="compensate" -s jerk_support_roof="8" -s wireframe_roof_drag_along="0.8" -s multiple_mesh_overlap="0.15" -s machine_max_jerk_z="0.4" -s acceleration_prime_tower="500" -s support_pattern="zigzag" -s support_initial_layer_line_distance="2.0" -s ironing_flow="10.0" -s support_enable="False" -s wipe_retraction_enable="True" -s magic_fuzzy_skin_point_dist="0.8" -s support_use_towers="False" -s jerk_support_infill="8" -s support_infill_rate="20" -s speed_equalize_flow_enabled="False" -s draft_shield_height="10" -s speed_prime_tower="25.0" -s mesh_position_z="0" -s limit_support_retractions="True" -s acceleration_print_layer_0="500" -s bridge_enable_more_layers="True" -s skin_edge_support_thickness="0" -s brim_line_count="20" -s machine_nozzle_size="0.4" -s skin_angles="[ ]" -s speed_support_bottom="25.0" -s wireframe_roof_outer_delay="0.2" -s machine_nozzle_head_distance="3" -s infill_mesh_order="0" -s cool_min_speed="10" -s machine_min_cool_heat_time_window="50.0" -s ironing_enabled="False" -s support_tree_branch_distance="1" -s cool_fan_speed_min="100.0" -s switch_extruder_extra_prime_amount="0" -s support_conical_enabled="False" -s spaghetti_max_height="2.0" -s support_offset="0" -s bridge_fan_speed_2="0" -s support_bottom_enable="True" -s retraction_enable="True" -s infill_sparse_density="20" -s material_final_print_temperature="210" -s raft_jerk="8" -s wipe_hop_enable="False" -s machine_nozzle_heat_up_speed="2.0" -s speed_roofing="25.0" -s jerk_travel_layer_0="8" -s blackmagic="0" -s bridge_wall_material_flow="50" -s support_tree_enable="False" -s skin_overlap_mm="0.04" -s raft_margin="15" -s infill_mesh="False" -s wipe_move_distance="20" -s material_shrinkage_percentage="0" -s skin_line_width="0.4" -s coasting_enable="False" -s support_infill_sparse_thickness="0.2" -s support_conical_angle="30" -s bridge_wall_coast="100" -s wall_0_material_flow="100" -s wipe_retraction_extra_prime_amount="0" -s bridge_skin_density_3="80" -s cool_min_layer_time="10" -s raft_surface_line_spacing="0.4" -s material_break_retracted_position="-50" -s sub_div_rad_add="0.4" -s mold_width="5" -s z_seam_position="back" -s speed="0" -s speed_print="50.0" -s brim_replaces_support="False" -s day="Thu" -s spaghetti_infill_enabled="False" -s acceleration_support_interface="500" -s wall_line_width="0.4" -s acceleration_travel="500" -s skirt_brim_material_flow="100" -s retraction_combing="noskin" -s wireframe_printspeed_flat="5" -s support_extruder_nr="0" -s layer_start_y="0.0" -s spaghetti_flow="20" -s prime_tower_wipe_enabled="True" -s bridge_skin_material_flow_3="110" -s prime_blob_enable="False" -s alternate_carve_order="True" -s material_break_preparation_retracted_position="-16" -s support_interface_density="33.333" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s raft_acceleration="500" -s acceleration_wall_x="500" -s switch_extruder_retraction_amount="16" -s cross_support_density_image="" -s meshfix_keep_open_polygons="False" -s minimum_bottom_area="10" -s infill_offset_y="0" -s prime_tower_flow="100" -s raft_interface_acceleration="500" -s experimental="0" -s ironing_only_highest_layer="False" -s bridge_settings_enabled="False" -s mesh_position_x="0" -s extruder_prime_pos_x="0" -s wipe_retraction_speed="25" -s meshfix_union_all="True" -s machine_extruder_count="1" -s layer_0_z_overlap="0.15" -s speed_layer_0="20.0" -s infill_randomize_start_location="False" -s top_skin_expand_distance="0.8" -s wall_0_inset="0" -s speed_support_interface="25.0" -s ironing_inset="0.2" -s skin_preshrink="0.8" -s minimum_interface_area="10" -s infill_before_walls="False" -s material="0" -s expand_skins_expand_distance="0.8" -s coasting_speed="90" -s speed_wall="25.0" -s raft_base_acceleration="500" -s wall_overhang_speed_factor="100" -s zig_zaggify_infill="False" -s material_flow_layer_0="100" -s material_anti_ooze_retracted_position="-4" -s layer_height_0="0.2" -s support_roof_angles="[ ]" -s infill_wipe_dist="0.0" -s meshfix_maximum_deviation="0.05" -s machine_max_acceleration_x="500" -s jerk_wall="8" -s infill_offset_x="0" -s machine_steps_per_mm_x="50" -s raft_interface_jerk="8" -s machine_nozzle_temp_enabled="True" -s raft_surface_speed="25.0" -s material_break_speed="25" -s skin_edge_support_layers="0" -s support="0" -s support_interface_material_flow="100" -s speed_wall_x="25.0" -s material_print_temp_prepend="True" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s machine_acceleration="500" -s min_skin_width_for_expansion="4.898587196589413e-17" -s jerk_wall_x="8" -s machine_center_is_zero="False" -s ooze_shield_enabled="False" -s bridge_fan_speed="100" -s support_wall_count="1" -s meshfix_maximum_travel_resolution="0.05" -s retraction_speed="25" -s wipe_retraction_prime_speed="25" -s support_material_flow="100" -s travel_compensate_overlapping_walls_0_enabled="False" -s support_mesh="False" -s slicing_tolerance="middle" -s roofing_pattern="lines" -s support_interface_pattern="grid" -s wall_material_flow="100" -s raft_fan_speed="0" -s acceleration_infill="500" -s wireframe_flat_delay="0.1" -s magic_fuzzy_skin_enabled="False" -s draft_shield_height_limitation="full" -s bridge_wall_min_length="5" -s alternate_extra_perimeter="False" -s retraction_hop="0.2" -s dual="0" -s material_break_temperature="50" -s adaptive_layer_height_enabled="False" -s machine_use_extruder_offset_to_offset_coords="True" -s machine_endstop_positive_direction_x="False" -s machine_max_feedrate_x="500" -s infill_wall_line_count="0" -s conical_overhang_enabled="False" -s raft_speed="25.0" -s support_roof_pattern="grid" -s adaptive_layer_height_threshold="0.2" -s jerk_prime_tower="8" -s print_bed_temperature="50" -s machine_width="235" -s acceleration_travel_layer_0="500" -s support_bottom_stair_step_height="0.3" -s magic_spiralize="False" -s machine_extruders_share_heater="False" -s support_infill_angles="[ ]" -s material_break_preparation_temperature="210" -s machine_head_with_fans_polygon="[[-26, 34], [-26, -32], [32, -32], [32, 34]]" -s wall_extruder_nr="-1" -s max_skin_angle_for_expansion="90" -s machine_nozzle_tip_outer_diameter="1" -s support_angle="45" -s gradual_infill_step_height="1.5" -s support_conical_min_width="5.0" -s material_bed_temp_wait="True" -s conical_overhang_angle="50" -s speed_support_roof="25.0" -s material_print_temperature="210" -s adhesion_type="skirt" -s roofing_line_width="0.4" -s wireframe_flow_flat="100" -s support_bottom_angles="[ ]" -s material_break_preparation_speed="2" -s wireframe_flow="100" -s speed_travel_layer_0="100.0" -s support_bottom_extruder_nr="0" -s infill="0" -s raft_interface_line_spacing="1.0" -s support_tree_collision_resolution="0.2" -s support_join_distance="2.0" -s machine_nozzle_cool_down_speed="2.0" -s wall_min_flow_retract="False" -s jerk_infill="8" -s bridge_wall_speed="12.5" -s xy_offset_layer_0="0" -s meshfix_union_all_remove_holes="False" -s magic_fuzzy_skin_point_density="1.25" -s machine_heated_bed="True" -s support_bottom_stair_step_width="5.0" -s build_volume_temperature="28" -s bottom_skin_expand_distance="0.8" -s switch_extruder_retraction_speed="20" -s anti_overhang_mesh="False" -s top_bottom_extruder_nr="-1" -s gradual_support_infill_steps="0" -s roofing_extruder_nr="-1" -s cool_fan_speed_max="100.0" -s support_interface_angles="[ ]" -s machine_feeder_wheel_diameter="10.0" -s support_bottom_density="33.333" -s support_xy_distance_overhang="0.4" -s print_sequence="all_at_once" -s infill_angles="[ ]" -s machine_max_feedrate_e="50" -s top_bottom_pattern_0="lines" -s raft_surface_line_width="0.4" -s retraction_hop_only_when_collides="False" -s cooling="0" -s retraction_extra_prime_amount="0" -s bridge_sparse_infill_max_density="0" -s print_temperature="210" -s acceleration_skirt_brim="500" -s raft_interface_line_width="0.8" -s meshfix_extensive_stitching="False" -s gradual_infill_steps="0" -s initial_bottom_layers="4" -s cool_fan_full_at_height="0.6000000000000001" -s material_flow="100" -s retraction_extrusion_window="10" -s retraction_hop_after_extruder_switch_height="0.2" -s z_seam_relative="False" -s small_feature_speed_factor="50" -s bottom_skin_preshrink="0.8" -s top_thickness="0.8" -s platform_adhesion="0" -s support_tower_roof_angle="65" -s command_line_settings="0" -s acceleration_support_bottom="500" -s jerk_print="8" -s extruder_prime_pos_y="0" -s extruders_enabled_count="1" -s brim_width="8.0" -s support_bottom_line_distance="2.4000240002400024" -s wall_min_flow="0" -s travel_speed="150.0" -s material_flush_purge_speed="0.5" -s bridge_fan_speed_3="0" -s support_skip_some_zags="False" -s wipe_repeat_count="5" -s raft_surface_fan_speed="0" -s connect_skin_polygons="False" -s support_z_distance="0.2" -s cross_infill_pocket_size="6.0" -s speed_support="25.0" -s retract_at_layer_change="False" -s wipe_brush_pos_x="100" -s bridge_skin_speed="12.5" -s jerk_roofing="8" -s raft_surface_acceleration="500" -s support_interface_height="0.8" -s machine_max_jerk_xy="10" -s smooth_spiralized_contours="True" -e0 -s acceleration_support_infill="500" -s resolution="0" -s machine_settings="0" -s machine_extruder_end_pos_x="0" -s material_flow_dependent_temperature="False" -s retraction_retract_speed="45" -s bridge_sparse_infill_max_density="0" -s hole_xy_offset="0" -s z_seam_x="117.5" -s skirt_brim_speed="20.0" -s infill_overlap_mm="0.12" -s material_break_preparation_speed="2" -s infill_support_enabled="False" -s support_xy_distance="0.8" -s cool_fan_enabled="True" -s ironing_pattern="zigzag" -s jerk_topbottom="8" -s jerk_wall_0="8" -s ironing_line_spacing="0.1" -s speed_ironing="16.666666666666668" -s raft_base_line_width="0.8" -s machine_steps_per_mm_z="50" -s gradual_support_infill_step_height="1" -s support_skip_zag_per_mm="20" -s fill_outline_gaps="False" -s magic_fuzzy_skin_thickness="0.3" -s cool_min_layer_time_fan_speed_max="10" -s acceleration_ironing="500" -s jerk_support_bottom="8" -s raft_interface_thickness="0.30000000000000004" -s infill_pattern="cubic" -s raft_surface_layers="2" -s travel="0" -s max_extrusion_before_wipe="10" -s retraction_prime_speed="45" -s z_seam_type="back" -s travel_compensate_overlapping_walls_0_enabled="False" -s mesh_position_y="0" -s small_feature_max_length="0.0" -s acceleration_layer_0="500" -s skin_overlap="10.0" -s skirt_line_count="3" -s wipe_hop_speed="5" -s default_material_print_temperature="200" -s support_tower_maximum_supported_diameter="3.0" -s jerk_print_layer_0="8" -s brim_gap="0" -s skin_no_small_gaps_heuristic="False" -s xy_offset="0" -s cool_fan_speed_0="0" -s acceleration_wall_0="500" -s machine_extruder_end_pos_abs="False" -s speed_support_infill="25.0" -s wall_line_width_x="0.4" -s bridge_skin_support_threshold="50" -s material_anti_ooze_retraction_speed="5" -s infill_line_distance="6.0" -s roofing_line_width="0.4" -s speed_travel_layer_0="100.0" -s switch_extruder_prime_speed="20" -s cool_lift_head="False" -s support_interface_line_width="0.4" -s wall_x_material_flow="100" -s material_extrusion_cool_down_speed="0.7" -s travel_compensate_overlapping_walls_enabled="True" -s small_hole_max_size="0" -s support_line_width="0.4" -s machine_extruder_start_pos_x="0" -s extruder_prime_pos_z="0" -s support_interface_offset="0.0" -s minimum_roof_area="10" -s cool_fan_full_layer="4" -s infill_enable_travel_optimization="False" -s bridge_skin_speed_3="12.5" -s jerk_skirt_brim="8" -s support_brim_line_count="10" -s acceleration_support="500" -s wall_0_wipe_dist="0.0" -s wipe_hop_amount="0.2" -s top_layers="4" -s skirt_brim_line_width="0.4" -s speed_equalize_flow_max="150" -s wall_overhang_angle="90" -s speed_infill="50.0" -s prime_tower_line_width="0.4" -s machine_extruder_start_pos_y="0" -s support_wall_count="1" -s bridge_fan_speed="100" -s material_anti_ooze_retracted_position="-4" -s support_roof_angles="[ ]" -s material_flow_layer_0="100" -s infill_wipe_dist="0.0" -s meshfix_maximum_deviation="0.05" -s material_break_speed="25" -s skin_edge_support_layers="0" -s support="0" -s bridge_fan_speed_2="0" -s support_offset="0" -s raft_interface_jerk="8" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s min_skin_width_for_expansion="4.898587196589413e-17" -s roofing_material_flow="100" -s zig_zaggify_infill="False" -s machine_nozzle_heat_up_speed="2.0" -s wipe_hop_enable="False" -s minimum_interface_area="10" -s infill_before_walls="False" -s acceleration_print="500" -s material_standby_temperature="180" -s support_roof_density="33.333" -s infill_sparse_thickness="0.2" -s support_fan_enable="False" -s jerk_travel="8" -s machine_extruder_cooling_fan_number="0" -s support_bottom_offset="0.0" -s magic_mesh_surface_mode="normal" -s coasting_min_volume="0.8" -s mold_enabled="False" -s skin_outline_count="1" -s acceleration_topbottom="500" -s layer_start_x="0.0" -s min_infill_area="0" -s support_brim_enable="True" -s infill_overlap="30.0" -s bridge_skin_density_2="75" -s gradual_infill_step_height="1.5" -s support_conical_min_width="5.0" -s support_bottom_line_width="0.4" -s spaghetti_inset="0.2" -s acceleration_support_roof="500" -s speed_print_layer_0="20.0" -s support_line_distance="2.0" -s bridge_skin_speed_2="12.5" -s jerk_layer_0="8" -s raft_jerk="8" -s material_final_print_temperature="200" -s support_tree_angle="40" -s switch_extruder_retraction_speeds="20" -s raft_base_fan_speed="0" -s machine_extruder_end_code="" -s skin_angles="[ ]" -s support_roof_offset="0.0" -s cross_infill_density_image="" -s brim_outside_only="True" -s support_roof_line_distance="2.4000240002400024" -s support_roof_enable="True" -s material_no_load_move_factor="0.940860215" -s raft_smoothing="5" -s jerk_support="8" -s small_feature_speed_factor_0="50" -s wipe_retraction_amount="5" -s machine_steps_per_mm_y="50" -s cool_fan_speed="100" -s blackmagic="0" -s material_maximum_park_duration="300" -s top_bottom_pattern="lines" -s infill_line_width="0.4" -s spaghetti_infill_extra_volume="0" -s spaghetti_max_infill_angle="10" -s top_bottom_thickness="0.8" -s support_tree_branch_diameter="2" -s roofing_angles="[ ]" -s z_seam_corner="z_seam_corner_weighted" -s retraction_amount="5" -s fill_perimeter_gaps="everywhere" -s infill_material_flow="100" -s bridge_skin_density="100" -s bridge_skin_material_flow="60" -s raft_airgap="0.3" -s support_bottom_height="0.8" -s support_interface_skip_height="0.2" -s bridge_enable_more_layers="True" -s raft_base_acceleration="500" -s wall_overhang_speed_factor="100" -s speed_support_bottom="25.0" -s machine_nozzle_head_distance="3" -s skirt_brim_material_flow="100" -s raft_surface_speed="25.0" -s center_object="False" -s support_roof_line_width="0.4" -s optimize_wall_printing_order="True" -s raft_base_speed="18.75" -s material_surface_energy="100" -s machine_steps_per_mm_e="1600" -s support_infill_rate="20" -s speed_equalize_flow_enabled="False" -s speed_z_hop="5" -s raft_surface_jerk="8" -s wipe_retraction_enable="True" -s magic_fuzzy_skin_point_dist="0.8" -s support_use_towers="False" -s jerk_support_infill="8" -s jerk_wall_x="8" -s retraction_count_max="100" -s skin_material_flow="100" -s extruder_prime_pos_abs="False" -s raft_base_thickness="0.24" -s zig_zaggify_support="False" -s material_adhesion_tendency="0" -s material_crystallinity="False" -s raft_base_line_spacing="1.6" -s speed_roofing="25.0" -s jerk_travel_layer_0="8" -s skin_edge_support_thickness="0" -s brim_line_count="20" -s machine_nozzle_size="0.4" -s bottom_layers="4" -s coasting_volume="0.064" -s shell="0" -s travel_avoid_supports="True" -s skirt_brim_minimal_length="250" -s support_xy_overrides_z="xy_overrides_z" -s speed_wall_0="25.0" -s meshfix="0" -s bridge_skin_material_flow_3="110" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s connect_infill_polygons="False" -s support_roof_material_flow="100" -s spaghetti_infill_stepped="True" -s retraction_speed="45" -s meshfix_maximum_travel_resolution="0.05" -s skin_overlap_mm="0.04" -s machine_heat_zone_length="16" -s support_interface_material_flow="100" -s speed_wall_x="25.0" -s support_initial_layer_line_distance="2.0" -s ironing_flow="10.0" -s support_tree_branch_diameter_angle="5" -s raft_base_jerk="8" -s support_bottom_enable="True" -s retraction_enable="True" -s infill_sparse_density="20" -s jerk_support_roof="8" -s extruder_prime_pos_y="0" -s ironing_enabled="False" -s support_tree_branch_distance="1" -s cool_fan_speed_min="100" -s switch_extruder_extra_prime_amount="0" -s support_conical_enabled="False" -s spaghetti_max_height="2.0" -s machine_extruder_start_pos_abs="False" -s infill_multiplier="1" -s raft_surface_thickness="0.2" -s machine_extruder_start_code="" -s z_seam_y="235" -s support_bottom_distance="0.2" -s acceleration_wall="500" -s layer_start_y="0.0" -s spaghetti_flow="20" -s prime_tower_wipe_enabled="True" -s support_bottom_material_flow="100" -s machine_min_cool_heat_time_window="50.0" -s cool_min_speed="10" -s travel_compensate_overlapping_walls_x_enabled="True" -s support_pattern="zigzag" -s infill_support_angle="40" -s support_xy_distance_overhang="0.4" -s speed_topbottom="25.0" -s prime_blob_enable="False" -s sub_div_rad_add="0.4" -s wipe_retraction_extra_prime_amount="0" -s bridge_skin_density_3="80" -s cool_min_layer_time="10" -s raft_surface_line_spacing="0.4" -s material_break_retracted_position="-50" -s bridge_wall_material_flow="50" -s meshfix_union_all="True" -s wipe_retraction_speed="45" -s extruder_prime_pos_x="0" -s acceleration_support_interface="500" -s wall_line_width="0.4" -s acceleration_travel="500" -s support_conical_angle="30" -s wall_line_count="2" -s outer_inset_first="False" -s wall_0_material_flow="100" -s bridge_wall_coast="100" -s support_tower_diameter="3.0" -s material_end_of_filament_purge_speed="0.5" -s material_break_preparation_retracted_position="-16" -s support_interface_density="33.333" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s machine_nozzle_offset_x="0" -s raft_acceleration="500" -s bridge_skin_material_flow_2="100" -s machine_endstop_positive_direction_y="False" -s acceleration_wall_x="500" -s support_connect_zigzags="True" -s material_end_of_filament_purge_length="20" -s mold_width="5" -s machine_endstop_positive_direction_z="True" -s switch_extruder_retraction_amount="16" -s cross_support_density_image="" -s meshfix_keep_open_polygons="False" -s minimum_bottom_area="10" -s infill_offset_y="0" -s support_interface_enable="True" -s support_brim_width="4" -s support_roof_height="0.8" -s coasting_speed="90" -s speed_wall="25.0" -s bottom_thickness="0.8" -s prime_tower_flow="100" -s material_diameter="1.75" -s raft_interface_acceleration="500" -s experimental="0" -s magic_fuzzy_skin_outside_only="False" -s retraction_min_travel="1.5" -s layer_0_z_overlap="0.15" -s speed_layer_0="20.0" -s infill_randomize_start_location="False" -s top_skin_expand_distance="0.8" -s roofing_layer_count="0" -s wall_0_inset="0" -s speed_support_interface="25.0" -s ironing_inset="0.2" -s skin_preshrink="0.8" -s machine_steps_per_mm_x="50" -s skirt_gap="10.0" -s support_zag_skip_count="10" -s wipe_pause="0" -s z_seam_position="back" -s speed="0" -s speed_print="50.0" -s brim_replaces_support="False" -s machine_nozzle_temp_enabled="True" -s material="0" -s expand_skins_expand_distance="0.8" -s support_supported_skin_fan_speed="100" -s infill_offset_x="0" -s jerk_wall="8" -s speed_travel="150.0" -s ironing_only_highest_layer="False" -s mesh_position_x="0" -s wipe_retraction_prime_speed="45" -s support_material_flow="100" -s slicing_tolerance="middle" -s roofing_pattern="lines" -s acceleration_infill="500" -s magic_fuzzy_skin_enabled="False" -s prime_tower_min_volume="6" -s acceleration_roofing="500" -s retraction_hop_enabled="False" -s alternate_extra_perimeter="False" -s material_break_temperature="50" -s machine_endstop_positive_direction_x="False" -s infill_wall_line_count="0" -s conical_overhang_enabled="False" -s support_roof_pattern="grid" -s raft_speed="25.0" -s machine_extruder_end_pos_y="0" -s jerk_prime_tower="8" -s acceleration_travel_layer_0="500" -s extruder_nr="0" -s support_infill_angles="[ ]" -s material_break_preparation_temperature="200" -s max_skin_angle_for_expansion="90" -s machine_nozzle_tip_outer_diameter="1" -s support_angle="45" -s conical_overhang_angle="50" -s speed_support_roof="25.0" -s material_print_temperature="200" -s speed_prime_tower="25.0" -s mesh_position_z="0" -s support_bottom_angles="[ ]" -s infill="0" -s raft_interface_line_spacing="1.0" -s support_tree_collision_resolution="0.2" -s wipe_retraction_retract_speed="45" -s support_join_distance="2.0" -s machine_nozzle_cool_down_speed="2.0" -s bridge_wall_speed="12.5" -s xy_offset_layer_0="0" -s meshfix_union_all_remove_holes="False" -s magic_fuzzy_skin_point_density="1.25" -s support_bottom_stair_step_width="5.0" -s gradual_support_infill_steps="0" -s cool_fan_speed_max="100" -s support_interface_angles="[ ]" -s infill_angles="[ ]" -s top_bottom_pattern_0="lines" -s raft_surface_line_width="0.4" -s mold_roof_height="0.5" -s retraction_hop_only_when_collides="False" -s cooling="0" -s retraction_extra_prime_amount="0" -s raft_interface_fan_speed="0" -s acceleration_skirt_brim="500" -s raft_interface_line_width="0.8" -s meshfix_extensive_stitching="False" -s clean_between_layers="False" -s gradual_infill_steps="0" -s material_print_temperature_layer_0="200" -s travel_avoid_distance="0.625" -s initial_bottom_layers="4" -s cool_fan_full_at_height="0.6000000000000001" -s support_bottom_density="33.333" -s machine_feeder_wheel_diameter="10.0" -s material_flow="100" -s retraction_extrusion_window="10" -s spaghetti_infill_enabled="False" -s initial_layer_line_width_factor="100.0" -s retraction_hop_after_extruder_switch_height="0.2" -s z_seam_relative="False" -s small_feature_speed_factor="50" -s bottom_skin_preshrink="0.8" -s raft_interface_speed="18.75" -s wall_line_width_0="0.4" -s retraction_combing_max_distance="30" -s top_thickness="0.8" -s platform_adhesion="0" -s support_tower_roof_angle="65" -s acceleration_support_bottom="500" -s command_line_settings="0" -s jerk_print="8" -s minimum_support_area="2" -s material_flush_purge_length="60" -s machine_nozzle_offset_y="0" -s line_width="0.4" -s brim_width="8.0" -s support_bottom_line_distance="2.4000240002400024" -s wall_min_flow="0" -s material_flush_purge_speed="0.5" -s jerk_support_interface="8" -s retraction_hop_after_extruder_switch="True" -s bridge_fan_speed_3="0" -s support_skip_some_zags="False" -s wipe_repeat_count="5" -s raft_surface_fan_speed="0" -s cross_infill_pocket_size="6.0" -s speed_support="25.0" -s retract_at_layer_change="False" -s wipe_brush_pos_x="100" -s bridge_skin_speed="12.5" -s jerk_roofing="8" -s raft_surface_acceleration="500" -s support_interface_height="0.8" -s mold_angle="40" -s jerk_infill="8" -s wall_min_flow_retract="False" -s support_bottom_stair_step_height="0.3" -s meshfix_maximum_resolution="0.05" -s dual="0" -s retraction_hop="0.2" -s top_skin_preshrink="0.8" -s filter_out_tiny_gaps="False" -s material_initial_print_temperature="200" -s wall_thickness="0.8" -s acceleration_prime_tower="500" -s multiple_mesh_overlap="0.15" -s jerk_ironing="8" -s raft_margin="15" -s support_bottom_pattern="grid" -s machine_nozzle_id="unknown" -s support_top_distance="0.2" -s travel_avoid_other_parts="True" -s support_z_distance="0.2" -s connect_skin_polygons="False" -s wall_material_flow="100" -s raft_fan_speed="0" -s support_interface_pattern="grid" -s switch_extruder_retraction_speed="20" -s bottom_skin_expand_distance="0.8" -s support_infill_sparse_thickness="0.2" -s coasting_enable="False" -s acceleration_print_layer_0="500" -s limit_support_retractions="True" -s material_shrinkage_percentage="0" -s skin_line_width="0.4" -s wipe_move_distance="20" -g -e0 -l "0" -s extruder_nr="0"
2020-07-30 03:29:36,815 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [844]: Backend quit with return code 3221225477. Resetting process and socket.
2020-07-30 03:29:37,059 - INFO - [MainThread] UM.Backend.Backend._onSocketError [214]: Backend crashed or closed.
2020-07-30 03:29:37,061 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [227]: Previous socket existed. Closing that first.
2020-07-30 03:29:37,063 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [304]: Attempting to kill the engine process
2020-07-30 03:29:37,066 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [227]: Previous socket existed. Closing that first.
2020-07-30 03:29:37,070 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [184]: Socket state changed to Listening
2020-07-30 03:29:37,082 - INFO - [MainThread] UM.Backend.Backend.startEngine [86]: Started engine process: C:\Program Files\Ultimaker Cura 4.6\CuraEngine.exe
2020-07-30 03:29:37,085 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [106]: [Backend] Calling engine with: ['C:\\Program Files\\Ultimaker Cura 4.6\\CuraEngine.exe', 'connect', '127.0.0.1:49674', '']
2020-07-30 03:29:37,119 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend]
2020-07-30 03:29:37,121 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] Cura_SteamEngine version 4.6.2
2020-07-30 03:29:37,123 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] Copyright (C) 2019 Ultimaker
2020-07-30 03:29:37,125 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend]
2020-07-30 03:29:37,128 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] This program is free software: you can redistribute it and/or modify
2020-07-30 03:29:37,131 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [188]: Socket state changed to Connected
2020-07-30 03:29:37,133 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [177]: Backend connected on port 49674
2020-07-30 03:29:37,134 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-07-30 03:29:37,137 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-07-30 03:29:37,139 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] (at your option) any later version.
2020-07-30 03:29:37,141 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend]
2020-07-30 03:29:37,143 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] This program is distributed in the hope that it will be useful,
2020-07-30 03:29:37,145 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-07-30 03:29:37,147 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2020-07-30 03:29:37,149 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] GNU Affero General Public License for more details.
2020-07-30 03:29:37,151 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend]
2020-07-30 03:29:37,153 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-07-30 03:29:37,155 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [106]: [Backend] along with this program. If not, see <http://www.gnu.org/licenses/>.