jacprint
-
Posts
6 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by jacprint
-
-
Thanks GregValian
The disallowed area explain the issue
BTW the json file is at .../Ultimaker-Cura.app/Contents/Resources/share/cura/resources/definitions
I went back and look in my older laptop and indeed was using: Ender 3 Pro, the v2 was not listed in Cura 5.0,
only Ender 3, and that one already had those disallowed area
That brings another question
I did try to copy and paste start and stop G-code in machine setting window
but copy and paste does not work
I can type and delete directly in the window, that works, not copy and paste , not with a right click, not with the global menu
I am saw a demo done on a Window pc where that works
Is that normal on Mac, intel or arm, it is the same?
Any way, now I can do it in the json file, so no biggy
Thanks for the help
-
CE3E3V2_gear60Cyclo.3mfHere you go
Also added a square shape 190 x 190 mm , there is free usable space on the sides
but not front and back, I have printed on the same machine with Cura 4.6 a 210 x 210 with room for a squirt around
-
Hi
thanks for the quick response
i see the same issue in the picture you posted
that double greyed zone front and back
but not on the sides
i will post another file when back home
-
Hi there
I am having issue with strange no print zone on ender 3
I have a Mac M1, it did work for a while, even after moving to cura5.2 but not anymore and I was trying various printer then those zone appeared and can't get rid of them
I deleted Cura, deleted Cura folder in library ( Macintosh HD\Users\[user_name]\Library\Application Support\cura)
restarted from scratch with 5.2.1, just set basic ender 3 V2 did not touch any setting other then increase bed size to 300 x 300 to give a better visual on no print zones
zones are still there, the position of them does not change with bed size
If I load a custom printer set to 235 x 235 zones are not there
I am including a picture of issue and a 3mf file, hopefully someone can figure out the issue
It is an issue because it limit the print size front to back to barely 190 mm, I have printed gears up to 210 mm in diameter
thanks for Cura
-
Hi
I have been looking to enable retraction when moving between holes
Is there a way to do that? Could not find the setting in Cura 4.6.1
Thanks
strange no print zone at front and back
in UltiMaker Cura
Posted
Thank MariMakes
I did not realize the impact of Build Plate Adhesion, that is helpfull
Thanks GregValiant
keyboard command do work on Mac... when using command key, not control!
All set now