Hi there
I have a problem with thin walls.
I've already checked forum and there's no suitable solution that works for me.
I try to print 0,4 wall (with 0,4 nozzle) and when I set the wall thickness in Fusion 360 for 0,4 it leaves kinda blobs/tubes across the whole model (on whole Z axis) while I printing. - please see the attachment (big yellow dots).
When I use only surface for set the wall in Fusion 360 Cura doesn't want me to print this and save only gcode with line on side of the bed (this from beginning of the print) with no preview option.
Already tried to set "thin walls" options with no results.
Settings for retraction in the attachment (for not stringing - PLA, Ender 5 Pro).
Models with 0,4 wall thiskness and another one with only surfece of the wall in the attachement (Models are rotate due the orientation while modelling - I print them vertically)
In the attachment you can see my case. Cura - I think - should set the path like 1-2-3-4-5-6 (back and forth) but instead it's like 4 3 4 3 2 1 2 3 5 4 5 6 7 ...
Is there any option for:
1. Remove this tubes from prints while I set the wall thickens in Fusion 360 or even just set the place for these?
2. Print single 0,4 wall when my model has only single wall with no thickness (surface)?
All best,
S
single wall 0,4.stl single wall surface.stl