We just got our s5 pro bundle and the first hick up was that the pva material would not load. Like everyone else it had me turn the printer off. The first time I did it I did not know I had to disconnect the material station as well. However, the first time I turned the printer off I was able to get the pva out of bay f, but it gave me another error on bay a where I place the tough pla that the printer came in with. Every time I turned just the printer off it gave me this error, then I seen somewhere that to reboot the material station I had to disconnected, I did that as well. Well, guess what it did the same thing it kept giving me that error on bay a and the material was already loaded all the way up to the nozzle and it had already primed it self it was getting ready to prime print head 2 when all this errors happened. So, what I did I pulled the material out by hand from bay a and I realized that every time I turned the printer off the material station on bay a kept on trying to load the material when the material was already in there. After I pulled it out and load it again it did not gave me that error, and guess why the pva was not loading? there was a piece of broken filament in the bowden tube and we just got this machine, I do not know why they did not check for broken filament before sending a machine to someone. Now, I am afraid of turning off the printer because I have the filament in there loaded and if I turn it off I think is going to try to load it again. Not sure if anyone has had this problem.
