MatheusCCF
-
Posts
3 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by MatheusCCF
-
-
@heqe95 I've started to play with Cura on my Zmorph VX yesterday. I had the exact same problems, and tried the same settings that you tested. As you mentioned, nothing change. Today I'm going to try the M92 E11 on my Start G-Code to see if i can extrude properly. I'm going to use a 100 ml syringe with a 4 mm nozzle. Let's see if it works.
If possible, can you share your experience working with Cura and the Zmorph printer since your last post?
-
How to lower amount of extrusion under the minimum?
in UltiMaker Cura
Posted
Brilliant Greg, I'll definitely try that on latter. Now I'm just having some doubts regarding the difference between those 3 parameters: M93, M221 and Flow.
Are they changing the same thing?
Just registering my progress,
- The adjustments on M92 + Flow 45% worked perfectly. Fine clay passes through the extruder like butter. However, cement pastes keep segregating from water and clogging the nozzle. I guess I'll have to rework my paste mix.