Robair
-
Posts
6 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by Robair
-
-
42 minutes ago, ahoeben said:
Your GPU should suffice.
You may have disabled the plugin that handles the layer view ("preview"). Go to the "Installed" tab of the Marketplace and scroll down to the "Simulation View". Make sure the checkmark in front of it is checked.
Absolutely brilliant!
Thank you very much
That was the problem. -
Ever since I upgraded to Cura 10 I have not been able to use or view the preview feature of Cura slicer.
I believe I have all the setting in teh software correct and it is important to note that ONLY X-Ray view is available as an option
I thought this issue would be resolved with 4.11 but to no avail.I suspect the issue is with my PC display driver which leads me to this question.
Do you possibly know if Cura 4.10 and later is compatible with the AMD Radeon R5 200 series of display cards and if so, do you possible know which device driver is required for this display card and be able to handle the preview option on Cura
-
17 hours ago, ahoeben said:
See this post:
Download the development snapshot linked therein, and drop the file onto the buildplate in Cura as if you were opening a 3d model.
I cannot find "development snapshot linked" and therefore cannot do this solution to get Arc Welder to display in my Cura 4.8 menu
Please, if you don't mind, can you elaborate a bit more on where to find this solution to get Arc welder to display. -
If anyone gets this "non display" of Arc welder sorted out, please post it
I have also just uploaded the plug in and no matter how much I search in all the menus, there is no Arc welder to be found. -
I am using a Tevo Tarantula printer, printing PLA and using Cura 4.8 for the slicing.
I am currently printing Eclipson Model A and have had great success with the ‘tubular’ structures like the fuselage and wing pieces that are open ended on both top and bottom layers.
My problem is with closed parts, specifically the pieces that have control horns attached.
Using Eclipson G-Codes I have no way of controlling or tweaking the print settings. Understandable as this code if the proprietary ownership.
My preference is to use their Elev1L.stl as I am able to adjust the profile setting at will EXCEPT, I simply cannot get the bottom layers, which correspond to the control horn, to fill in to print solid.
No matter how much I adjust the settings related to the bottom layers, I simply cannot get that part of the struct to fill.
Elev1L.stlCurrent Cura settings:Layer height .02
Initial layer height 0.3
Line width 0.4
Bottom Thickness 0.8
Bottom Layers 3
Initial bottom layer 3
Please assist if you can.
Rob
Question regarding Display driver
in UltiMaker Cura
Posted
I totally understand.
Fortunately ahoeben answered the question for me
Thanks for responding anyway.