TDielemans

I may be a late to this thread, but I was wondering if a suggestion could be made to make it possible to set the layer height differently depending on the print head. Of course these would have to be equal intervals of each other (I.e. Core A = 0.1mm layers, B = 0.2mm layers). Reason I ask is that we often make multi-material nests, with the TPU top coat for reduced marring, and I was thinking of way to improve throughput would be to print the base with a 0.8mm nozzle and as coarse as possible. But then the TPU with a 0.4mm nozzle and a more fine finish. You'd essentially print 2 layers of the one material for every 1 layer of the other. This would then be 3 passes per set value, instead of 4 passes per set value. Thanks in advance.