samca208

Got a new S5 pro with air manager and material manager. When printing with 1 extruder got no issues. But when printing using both extruders one of them will not extrude first couple of layers. Prime tower is On with 6mm³. Exact problem. Both extruders are loaded and primed correctly. Brim is applied using extruder 1. When second extruder starts printing nothing comes out for the first layers. After it will start producing small blobs. Rectified issue by increasing the prime volume to 42mm3 on both extruders. Problem is not extruder dependent as I reproduced problem by swapping extruders settings. Meaning doing brim with extruder 2. With brim on extruder 2 problem is reproduced on extruder 1