I first would like to let you know that I am very grateful for helping me out with this. It is not something I have encountered before.
I probably do have the units confused. That is what it said on the owners manual for the dual gear extruder. Right now I only use PLA and no it was not specific to it. As far as the holes are concerned, there are none. This is the issue I am having sometimes. Some print just fine and others not so well. Those holes are where the extruder started skipping again for some odd reason. I just printed two other items and keeping the speed set as you had earlier told me and they printed just fine. I didn't change the speed or anything else when this last piece was printed. Pics are attached. I just now started to print a fan mount with ducts and the extruder is skipping all over the place and leaving "nits" as you called them. However, the first few layers printed fine. I even slowed down the print speed to 80% and turned up the nozzle to 205 then to 210 and it is still clicking. (Link to the video is in my Google Drive below) It did not click much at all during the first few layers.
The attached 3mf files are
Image 1 is the TT_E3D Mount and the TT_E3D BL_Touch Mount (printed just fine)
Image 3 is the TT_E3D Fan Mount. (Printed not so well)
Link to video of clicking
TT_E3D Mount.3mf
TT_E3D Fan Mount.3mf