kenny94

Thanks for your answer. I'll try that first, but I'm afraid I need to fix the problem in CAD. The model is very very complex and this is not an option to fix it wall by wall. If a tool could enable to thicken all at once, it would be great. I'm not looking for an accurate printing, but a good overall shape and recognizable mockup.

Hello, I'm trying to print at very small scale a complete Trainset starting from the real 3D model at 1:1 scale. The problem is the thickness of the surfaces in the model. At 1:1 scale, some surfaces are few milimeter thick, like the metal sheets, the piping and so on... But on Cura, I print at 1:30 scale, so some walls are 0.01 mm thin ! I found the option "print thin Walls" on Cura, but it only allow to print 1 line wall mimimum. It is too thin for me, I'd like to have at least 2 or 3 line per wall for mechanical purpose. Is there a way to achieve it in Cura directly ? Also I'm using Autodesk Fusion 360, so If you have an idea on how to solve the issue in it, I'll take it also ! Thanks in advance !