[Per Model Settings - Nozzle Temperature]

Thank you for the discussion.  I know this is old but still relevant and not implemented.  Can we revisit this?  I am trying to do some calibration and I would like to print one-at-a time with temperature different per model.  I want to see the affects of nozzle temperature differences on my first layers.  I know about temp towers.  That is not what I want to do.  Thank you.

[Reload Models with Different File Names]

ahoeben, Thank you!  Works for me!  Good workaround!  This should probably be addressed in the base code.

[Reload Models with Different File Names]

That does not work unfortunately, at least not in CURA 5.  This is because the model is reloaded from the .3mf project file instead of from the original file location.

 

To replicate this issue:

Start a new project

open an stl file

Save the project

change the stl file and save it with the same name as before (change to the model should be easily discernable)

reload the model in Cura

 

[Reload Models with Different File Names]

I run into the same issue.  I basically need an option to "reload from file".  I worked around the issue by just using the same stl file for all versions and keeping my versioning in my CAD software, but in my case right now, I decided to move the folder with my scratch stl files and there is no way to point CURA to the new location of the model file.