JohnForeman

I am having a problem with my prints, as illustrated in the picture. My printer is a Balko Touch, one of the Wanhau ones rebadged. My STL is checked and corrected. The PLA is new and reasonable quality. Badly printed layers goes through the print and appears to have an association with holes or changes of shape in the object being printed. This was set at 100% infill with a fine print. The blobs are supports. Any help would be appreciated.

Greg, I will give it a clean out but the one on the left was printed just before the one on the right. The material is PLA. BTW, nice bike. Dustin, thank you for your suggestions. I will have a look at them and see how they compare to the Prusa settings.

The above prints are done on a Balco Touch, from the same STL file. The right was sliced with the latest Cura and the left with Prusa slicer. I have had excellent results with Cura, but does anyone know what I am doing wrong with this. I do not think I have changed any settings. The Touch is set up as a Wanhau printer. All prints start of well, but start to fail about the same level. I have had excellent results with Cura, but does anyone know what I am doing wrong with this.