Bertaz31

Still the same problem. At about 10mm I inser a magnet in the piece and resume, but it resumes about 40mm higher The Gcode seems correct, with the last mod we added M400 M25 ; Do the actual pause M117 M117 M117 M117 M117 M117 M117 Maybe i should try the workaround with "search and replace" as you suggested in the post you linked above.. Tomorrow i will try and see what happens! thanks!! CE3E3V2_POrta_magnete_tenda.gcode

Many thanks Greg for your help, i'll try as soon as the printer is free

Good morning, I'm doing several tests with filament change, but I have the same problem every time, I'm using the "Pause al layer Height" funcion in Cura, indicating the layer number. Once the print is paused (using M25, as I had several issues with M0), I change the filament, However, when I resume the print, it starts from a much higher Z coordinate (about 20mm above the piece). Can you help me? I'm using Ultimaker Cura 5.3.1 and an Ender 3 V2 NEO printer Filament change test_pauseV2.gcode