I have an ender 7, printing Overture PRTG. My issue is during the infill print I can hear my extruder is skipping. I have tried to lower the infill print speed setting significantly, but it doesn't seem to make much difference. When printing wall and such, I hear no skipping even though I have print speeds around 70 mm/S
I have Klipper installed and on the status display I see print speeds up to 100 mm/S when the setting of infill is 25mm/S. I also watch the gCode viewer and it seems to match 100% during the infill printing I can hear the clicks.
Any suggestion on how to lower the infill speed are greatly appreciated. Thanks