kaylanichole36

ok this may sound silly but like I said I am totally new to all of this. I did find my end G-code. This is how it reads. G91 ;Relative positioning G1 E-2 F2700 ;Retract a bit G1 E-2 Z0.2 F2400 ;Retract and raise Z G1 X0 Y220 F3000 ;Wipe out G1 Z10 ;Raise Z more G90 ;Absolute positionning G1 X0 Y{machine_depth} ;Present print M106 S0 ;Turn-off fan M104 S0 ;Turn-off hotend M140 S0 ;Turn-off bed M84 X Y E ;Disable all steppers but Z Should I just copy and paste Slashee's into this box?

I am very new to 3d printing, just got my printer for Christmas, I have the Sovol SV07 plus. I am currently using Cura 5.6 but my printer is not an option in the list provided. How would I go about making sure all of my settings are correct to continue using Cura? I have had it set as the Sovol SV06 plus and the prints come out great but am noticing that the nozzle is not lifting from my prints when it is complete and if not caught in time, is melting through my project. This makes it hard to do longer projects because I am so worried that something might happen if it goes through the night. Please help!