Thank you, typically for me I have never really needed to change the base settings in cura for the printer as it worked upon startup. This was the first time I have needed to adjust those settings. I changed the build plate size to the appropriate 235x235 and it got it 95% there. I think with some minor adjustments to the offsets I can get it the rest of the way but it is trial and error at that point.
As for option C, a while ago I replaced the standard board in the printer with a SKR v1.3 board and had to adjust firmware and everything and have not touched it since. Luckily this was able to get me to a solution.
Thank you! It is much appreciated!