maartendc
-
Posts
13 -
Joined
-
Last visited
Never
Content Type
Forums
Events
3D Prints
Posts posted by maartendc
-
-
i have just installed cura 13.06.5 on my mac. If i load a model it is not on the platform but lower than the platform. The slicing is from the platform so i miss the first layers of the model.
Anyone encountered the same problem?
-
Yes, you do have to update the firmware so i found out :-P
-
I have just added the dual extrusion kit to my Ultimaker. The first heater is working but the second doesn't. Do i need to update the firmware or something in the Ulticontroller?
Another thing i noticed that a little black block on two of the stepper drivers broke off, i guess they are for cooling. Is that a problem, can it be fixed?
-
thx for the answer. Not the one i wanted to hear but its an answer :-)
-
i experience the same 'seam'. Do i need to change it in gcode or is there another way around?
-
Thx all, the problem is solved. You were right, after checking all screws of the pulleys and motors, i found out that one off the belts wasn't tight enough causing slipping now and then. So i loosened the pulleys, tightened the belt tensioners and fastened the pulleys again. Now i make great prints via the ulticontroller as well. me happy man
-
Thank you Rob, i checked al the hardware, everything is tightened and prints via a usb cable come out perfectly. The same object printed via the ulticontroller keeps 'stepping' on the x axis. Are there any settings i could change in the controller or so?
-
i just installed an ulticontroller on my ultimaker and downloaded the newest cura. If i am printing via an usb cable the print comes out fine. If i copy the file to the SD card and print the same file via the ulticontroller - the print 'steps' on the x axis (every layer moves a few mm to the right, like one of the pulleys or belts is loose, but this isn't so). Some1 has any idea?
-
lol, nice link, thx
-
euh, is it me or are there a lot of 'hightec' sounds while printing, like R2D2 is at work ? My wife and kid likes it but i'm not sure. Can you turn it of because i don't have the feeling its the the original sound of the motors... or am i wrong?
-
thx
-
I received 1 Blue limit switch, 1 red limit switch, 2 black limit switches all with long wires and 2 limit switches with short wires. Does any1 know if i can use 2 short wires switches on the back panel? or do i need to ask ultimaker for a long one?
model not on platform
in UltiMaker Cura
Posted
pff, i didn't see that. Thx, thats it