ultimore
-
Posts
42 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by ultimore
-
-
That's right. I'm planning to switch to another electronics platform (Megatronics V3) running entirely off 24V. This will be documented as well with my "UM Black Edition". Timescale on this project is at least 6 weeks, because I have to wait 5 weeks for the frame material to arrive...
The printed tube cutter should work just as well as a regular one.. All you need is a very sharp blade, like a surgical scalpel. (You're gonna need one of these for my v6 mount anyways ).
If i dont mentioned about 24v heater , they sent me 12v one? is it possible to use with ultimaker? Live too far away so the delivery took me 3 weeks(
-
Can someone post here e3d v6 mount STL for ultimaker original?
-
Previous step driver burnt, I bought new one now I have new trouble after few layers it start to lay out with clumps, what can it be?
-
Russia, it's really hard to find smth related to 3d printing. Some countries just don't work with us(
-
Can u post stepper driver which I can buy in my country ?
-
Can't understand how to tune up the stepper motor driver correctly
-
Guys I've turned the driver and motor started to sound like fire alarm(((
-
it is attached and getting airflowAlso check that the heatsink is attached and that the driver and heatsink are getting airflow from the fan. -
Check the ekectronics assembly guide on the Ultimaker Wiki. On the bottom you find instructions about adjusting the stepper current. If you are lucky then the driver is still ok.
Can't find manual to this, please post it here.
-
maybe the extruder driver is fed too much current, and so overheats?
How to fix it?
-
I touched the E driver on electronics and it's very hot. Is it the drivers or fan problem? Others seems cold. Or maybe it's hard to extrude for motor?
-
Hi all , I have a problem with printing. I post here 2 videos , so u can see it.
In few words, when I try to print first 5 layers put well then , extruders drive motor start knocking and it can't print.
Sorry for my bad English
-
Thank you for help, i made it work. So i had to invert 2 axis X and Y in marlin builder i have to do 2 ticks on Y and Z axis. So now everything works fine! Thank you very much! I appreciate your help!
-
Thank you , now x and y axis work fine. But when i try to print smth, Z axis going down for home, as i know it should go up, i will put here my compilation , so maybe u can help me.
-
250000 baudrate, so maybe someone can upload here fully working marlin firmware with X and Y axis inverted?
axises dont work for me.
extruder stucked in the corner, and i cant control it.
-
Hello everyone, i'm newbie in 3d printing. So i bought used ultimaker with inverted X, Y axises. Trying to compile marlin firmware with Ginge's builder, then upload firmware with cura 13.12 and it's gone. I cant control x and y axises and when connect to replicatorg there is an error
[17:21:56] RepRap/Ultimaker not responding to RTS reset. Trying again..
[17:21:56] Attempting to reset RepRap/Ultimaker (pulsing RTS)
[17:21:57] Unknown: np|hnvba8fvh*fjp.vh.hx%
[17:21:57] Unknown: o~|yl]+mj-^&~.hxj3^a
So i want you to help me with this problem. Thank you, sorry for my bad english.
stepper motor problem
in UltiMaker 3D printers
Posted
Guys so have a problem with stepper motor, i think.
On Y axis when i try to move it up, it starts cracking.
Here is the video.
Help me please