-
Posts
12 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by kepolas
-
-
No no, not that. I mean the metal thing where filament enters the feeder.
-
Hey everyone. This is probably stupid question but does anyone from Ultimaker or anyone here in forum knows if its possible (and how) to get this little thing for stock feeder on UM2...? I have "older" version of Ultimaker 2 without this grommet and one "new" with it and id like to use it with roberts feeder on my "older" UM2 as well.
Thanks!
-
Well I to have both WoodFIll and BambooFIll, but im located in Europe so not sure about how much would shipping cost, but if you would like take a look at my 3DHubs page.
https://www.3dhubs.com/zagreb/hubs/arca-somni
- 1
-
Well, I have two Ultimaker 2's and im also trying to make some money out of it. It is hard and at the moment i don't earn really anything since all I earn I use for other filament and modifications on printer such as 3dSolex and nozzles. For me its specially hard since im situated in Croatia which is kinda crappy place to live atm, with people who have little knowledge of 3d printing. I started a business such as sole trader in england, and i still work regular day job. And its getting me exhausted. 3DHubs are awesome platform for doing business, but since its idea is for local printing i yet have to get more orders. I'm lucky enough to have a small start up company from US who's owner actually have roots from Croatia, so i print a lot of prototypes for his business for him. Otherwise i would be dead buried in dept. For now I manage to pay the loan to the bank i used for purchasing those two printers, and any excess money i invest further in things such as web page, filament and such. So as long as its positive 0 im ok. Im looking to extend this printing business but for now its a slow process specially since i don't have ability to devote myself only tho this (all though i would love and that's the ultimate goal for me). Btw i do not calculate my labor into this at all.
Also i try to 3d model things but this is also going slow for me. Im learning al ot, and i must say special thanks to everyone in this forum for many genius advice's.
You can check my hub here: https://www.3dhubs.com/zagreb/hubs/arca-somni
And my web page (still in development by me and im not programmer so its also slow as i lean along the way): www.arcasomni.com
So, hard road ahead...but I have many ideas and someday i hope this pays out.
-
You are just plain awesome, cant wait for that 2nd batch.
Keep up the good job.
-
Never seen that happening before (naturally, I tested the 15.01 release on Windows7 a few days before the actual release)
The lack of printing time info most likely means that the engine isn't starting properly.
Can you post the contents of:
C:\Users\[username]\.cura\15.01\output_log.txt
That might give a hint in what is going wrong.
I too have this problem. I run WIN 8.1. I must be noob since i cant find where to upload that txt file. but ill copy a part of it here:
# Generating comtypes.gen._683BF642_E9CA_4124_BE43_67065B2FA653_0_1_0# Generating comtypes.gen.TaskbarLibLoading old settings from C:\Users\Marko\.cura\14.12.1Failed to listen on port: 49674Listening for engine communications on 49675Flashing 118826 bytesVerifying 118826 bytesRunning: C:\Program Files (x86)\Cura_15.01\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode= -s supportXYDistance=700 -s insetXSpeed=50 -s retractionZHop=0 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s gcodeFlavor=1 -s postSwitchExtruderCode= -s retractionSpeed=40 -s filamentFlow=100 -s infillOverlap=15 -s inset0Speed=50 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=6 -s initialLayerSpeed=20 -s minimalLayerTime=5 -s infillSpeed=50 -s supportExtruder=-1 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s supportEverywhere=0 -s filamentDiameter=2850 -s initialLayerThickness=300 -s supportAngle=-1 -s fanFullOnLayerNr=2 -s extruderOffset[1].X=18000 -s extruderOffset[1].Y=0 -s layerThickness=100 -s endCode=M25 ;Stop reading from this point on.;CURA_PROFILE_STRING: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-s minimalExtrusionBeforeRetraction=20 -s retractionMinimalDistance=1500 -s skirtMinLength=150000 -s objectSink=0 -s retractionAmount=4500 -s skinSpeed=50 -s skirtLineCount=1 -s startCode= -s skirtDistance=3000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s printSpeed=50 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=150 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s sparseInfillLineDistance=2000 -s insetCount=2 -s downSkinCount=6 -s multiVolumeOverlap=150 -g 49675 -s posx=117944 -s posy=146155 $Cura_SteamEngine version 15.01Copyright © 2014 David BraamThis program is free software: you can redistribute it and/or modifyit under the terms of the GNU Affero General Public License as published bythe Free Software Foundation, either version 3 of the License, or(at your option) any later version.This program is distributed in the hope that it will be useful,but WITHOUT ANY WARRANTY; without even the implied warranty ofMERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See theGNU Affero General Public License for more details.You should have received a copy of the GNU Affero General Public Licensealong with this program. If not, see <Default config 'default.cfg' not usedReading mesh from socket with 67224 vertexesLoaded from disk in 0.031sAnalyzing and optimizing model...Face counts: 22408 -> 21542 96.1%Vertex counts: 67224 -> 10501 15.6%Size: 56.782000 52.947000 80.000000vMin: 89.553000 119.682000 0.000000vMax: 146.335000 172.629000 80.000000vMin: -25.447000 7.181000 0.000000vMax: 31.335000 60.128000 80.000000Matrix: 1.000000 0.000000 0.000000Matrix: 0.000000 1.000000 0.000000Matrix: 0.000000 0.000000 1.000000Optimize model 0.047sSlicing model...Layer count: 798Sliced model in 0.344sGenerating support map...Generating layer parts...Generated layer parts in 0.140sGenerated inset in 0.719sGenerated up/down skin in 1.266sRunning: C:\Program Files (x86)\Cura_15.01\CuraEngine.exe -v -p -s initialSpeedupLayers=4 -s minimalFeedrate=10 -s preSwitchExtruderCode= -s supportXYDistance=700 -s insetXSpeed=50 -s retractionZHop=0 -s extruderOffset[3].X=0 -s extruderOffset[3].Y=0 -s gcodeFlavor=1 -s postSwitchExtruderCode= -s retractionSpeed=40 -s filamentFlow=100 -s infillOverlap=15 -s inset0Speed=50 -s coolHeadLift=0 -s extrusionWidth=400 -s upSkinCount=6 -s initialLayerSpeed=20 -s minimalLayerTime=5 -s infillSpeed=50 -s supportExtruder=-1 -s fanSpeedMax=100 -s supportType=1 -s enableCombing=1 -s fanSpeedMin=100 -s supportZDistance=150 -s supportEverywhere=0 -s filamentDiameter=2850 -s initialLayerThickness=300 -s supportAngle=-1 -s fanFullOnLayerNr=2 -s extruderOffset[1].X=18000 -s extruderOffset[1].Y=0 -s layerThickness=100 -s endCode=M25 ;Stop reading from this point on.;CURA_PROFILE_STRING:eNrtWktv20YQvhJCf8QeEzRWSUqKnQg8NKntS1IEsIsmvhArciluTXKJ3aVl2dB/78xySVEy3TqN07yogw1+nNmZnfnmYVgZXTMZpowvUx24Y89Z0SwLdcqjy4IpBdCRI5mWNNJcFCEr6CJjwbmsmKNExuMwMwd0FZ47CYczYlYorteB7zqFuLnJWKj4DYP3U6eUvNChKhmLg5lrHzXLSyapriQLfK8H9YMecNIHTvvAWQsuWLxj7dB1VFWWQurgd1Ewp8yoToTMQxqnTMG1a9jKhHFFs5Bda1mZd6+ETp0VL1moxYrJ4IRminWA8EpkVc4Cb+YIcQNRSDnLYisGkaI5A59iDr81qPvjo9ldGO9+B5z0gdM+cNYFk0ysAs91x243s3U2pnsozUVV6GA6nnVREwH7ynu++y7nRQgPVywLvN03kcgXvFgGv2bZngLPdyIKPvhdiVSUiDkLobXId7g2cQz/3HDFY52GCWgIiZdzxOIvFgHJeHFplMUVkxktje9I9JlTe2kv7s06FmpO1y+AvrwwhK6fUcwwn0pGOxgvFNPuPnDdASIhMhMeWzIcSAGppk1VxbasLjmQLOMFg4iZCFtoSctggtbNUxO2jBVLnVr/8bCkAl/bgq4N2Du67vYpzOm1QVq3EkChIoCpFkwZhfrmibZkrQteQzY69V+HrEZMmGygke9Nxeh1yYI3cCPVQrRYQh953lZeaHRr81vF6zVQWGlaRNg4Dlv8pgujfMklzbC9WE95XkLDyUXcIAvJ825QIa2SJhBGKpe8CGZj+2xEVEkjZOqkQRdUsT3ebXFUMfQDwlt56DJMAhl3lfzD/bdbVWyL5iXlEhIdQhc2pOlgeIJfA6qy+sgkFeyhfTZbjR2LCb+G6pKSA/3CqjAVj+0f8hXSJqf3iyzaLtaVgZCIkhXhgmvVJwCFjqPhCuKsuY5SjHQtVmYVJAMyBAW3DJoSjhjGK7wODrw9aA3QT8ADqcfLCHM9P8t4xGJC9UtyG9P1Bn9qBr+w2jaj+SuqeESgMDVYVS/JGwwgqasFVLLONNyQP+GiIHO7OxI35ASoCnB3ysHR73C2ELQD7+z0qY2e2M5LIDRxrVh34rqFbvIOtKptLztakVC6q4XPcOpb74VLzm57R9qGzP8ooN8afS0IjWOyFpUkYlUQkCUdWYKUwOPcF+1xDz3qzjGnvkfsZw6TR0Kwr2hWMTU6BW+bN3QBvaPSjJQCggeUgmSM3h75rQAkiJh5EEN20GijgBU9AlcPW0nMPllxnRKdMgLtjYgkGYEjR+S9Sz646Ai0JPL+lw94EjQ6wopYQRdTRujCtd6i0MUdkdGpRy48aA/k5LY7MDZWA402+wKJMSbeLM9B7YVPjtsbbz/zGyaF0bL3i0ndwdHQie+65Hiyp2EFySTP4W4E2zQB56LLjzdC6JLywpjavQ3Qt9LEJB9yQXLgOV0yIgry5vVvREWSsQLi7h2Sd1ZmPB6PHAhTU3nHRUxOX9v0TMlZj1udy2DNQWFKk6y33tS9V8HIxYa0WxXyhCfIQpLCHQjXTzHgHnnAZy4ZZAuazw73ICDHBxCUiev+i7JZSmqqNfVJCXQ6cBAogFWQmAiiRL32PkNOgVUGs4IokTNMoqGNhChD5RiK/QyjGnyYkfcHPtAWf/QT7oJUpTVJIeSNR6037IoVUCZ47LYE/vFS95XHM/DWOIp7AOGKCKCI9X1F1yOo2On9pyrNSugNymS4U/x3JXu7wRw6kYBL4ZAAxi03I8eUuj90+kfo9NNP7/T1wDj3+k7y/9NR7pcdP9/AUDm/p8XNz1a4SKEdVPWhLzR99lMGkef2DyLPfdRJZGwd3Pb/fbmBW7sPunXCpdLf0r0fawL794zgc/cjpzDqeMPkHib3Z5nck2FyD5P7h53c/g85uYd9ZdhX7uwrky+5r6COP+w4w47zWXac6bDjfFU7jv94O86wLv2f69LkQSN0Cn5/T4vDw5bEyXd262FJHJbEO0vi9FtbElFnMiyWw2L56Iul/c5L93sOLbj9B2z9lZ0dIYN0JCSDWRuxcaSuAgfSULeaY0vNdnWtG9CC6RVUp7l2VElpgtywGFNgUg1Iiz4jqxQU2mo3a0VeZZqXWdsypBqP5ucphBWtYXhh0TFENzzCQ8+fFE9HDkRFf00O0gSLsPXvb9lV7Uc=-s minimalExtrusionBeforeRetraction=20 -s retractionMinimalDistance=1500 -s skirtMinLength=150000 -s objectSink=0 -s retractionAmount=4500 -s skinSpeed=50 -s skirtLineCount=1 -s startCode= -s skirtDistance=3000 -s extruderOffset[2].Y=0 -s extruderOffset[2].X=0 -s printSpeed=50 -s fixHorrible=1 -s layer0extrusionWidth=400 -s moveSpeed=150 -s supportLineDistance=2666 -s retractionAmountExtruderSwitch=16500 -s sparseInfillLineDistance=2000 -s insetCount=2 -s downSkinCount=6 -s multiVolumeOverlap=150 -g 49675 -s posx=120415 -s posy=152975 $Cura_SteamEngine version 15.01Copyright © 2014 David BraamThis program is free software: you can redistribute it and/or modifyit under the terms of the GNU Affero General Public License as published bythe Free Software Foundation, either version 3 of the License, or(at your option) any later version.This program is distributed in the hope that it will be useful,but WITHOUT ANY WARRANTY; without even the implied warranty ofMERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See theGNU Affero General Public License for more details. -
Yep (probably). rigs has explored this issue recently.
You have to downgrade the firmware (if i recognize your post correctly - you don't have done this yet?).
A factory reset is not sufficient.
Just use the Cura V14.12.1 and select "Machine -> Install default firmware..." from the menu.
And afterwards - make a new video..
That was the solution. I have no more problems after installing default fimware.
Thank you!
-
Ok, will try this too, i hope it works. Thank you!
-
hmm, could it be the fimware problem? It did actually start when i installed Cura 15.01-RC5 and the fimware that came with it. Then i reset UM2 to default and installed Cura 14.12.1 but the problem still persists. (excuse my noobism im still quite new with this...learning as i go)
-
More like the first part of what you said. I tried to do the change filament but without filament actually inside the printer and it still does the same thing.
-
Hello everyone. This is my first post but I read this forum quite a lot. I would like to say that I enjoy my time reading this forum and it was very helpful so far. So just props to all of you members for doing such a great job.
Now i have a problem and a question (I apologize if its answered already somewhere else, at this time i couldn't find the topic), why this in the video happens to my extruder..? Every time i try to load or remove filament it stops rotating little after the middle of the process. Its not such a problem when i load the filament since it continues to load it up slowly, but its a bigger problem when i want to remove the filament since then i have to do it manually.
Everything else so far seems to be ok with the extrusion when printing.
Any help would be much appreciated.
Thoughts about the new Cura
in UltiMaker Cura
Posted
Why is there no option to load already saved profile or to load profile from gcode like in old Cura? I didn't really do much testing but, right out of the blue after installation I wanted to use existing profile on similar model, and just couldn't find any options to load that. I just need to redo profile again..? And then what..? Do i have to type all the settings again for next model i plan to print...