I checked the firmware and it is 14.07.00. All the filament I've tried is PLA straight from Ultimaker, I was sure to give it plenty of slack as well.
And it may have been difficult to see but the tension was set for the second notch from the top on the first attempt and then was moved to the top notch on the second attempt in the video.
I also removed the filament and inspected it, normal looking bite marks no different from the rest of the filament.
I'm at a loss of what could be wrong. Can't print anything at the moment. Is there anything else that I could try? Should I try to make use of the warranty while I still can?
The only change I can think of is that the weather has gotten alittle colder, room temperature is still in the 65-75 F range though.
Thanks for the help.
UPDATE -
- Did the atomic pull method posted by gr5 twice. Didn't see it do anything. http://umforum.ultimaker.com/index.php?/topic/4118-blocked-nozzle/?p=33691
- Upped the current on the E motor under the maintenance tab to 1300 mA.
- Adjusted the build plate.
- Prayed.
Success! No more constant clicking, or slipping rather. Still hear a very damp constant click coming from the feeder. Doesn't seem to affect prints though.