lencon
-
Posts
6 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by lencon
-
-
Hey,
Thanx for the feedback.
I guess your problem is the teflon coupler that is deformed and needs to be inspected/replaced@Nicolinux; Yeah mate that was my first guess as well.... sadly I ordered a complete new extruder kit and replaced the whole bunch and still the same result.
I changed the retract at the end of the print from 20mm to 12mm in Ultimaker2Marlin@Dimensioneer; Thanx mate I will try this one..... Seems worth the try. Can you tell me if this manual covers the knowlage www.extrudable.me needed to change the code????? I will let you know if it worked for me.
Most of all I'me troubled by the idea that more people should have this problem right? I've got the printer now for about 1 year and use it quite often.......
Cheers!
-
L.S.,
Since some time I am experiencing issues with the retract @ the end of a program. If I want to start the next print no material will flow through the nozzle.I think the issue has to do with "necking" of the filament just where the material is in its glass state.
This "necking" of the material prevents a firm push from the extruder/fillament (material slides along itself. piece of filament in nozzle and in bowden tube arn't connected no more ) when starting a new print...... Does any one of recognize this problem?
If so is there somewhere in cura/firmware where i can change the amount of retract at the end of a print?
Printer: UM2
Firmware: 15.04.02
Material: PLA metallic silver
Temp: 230 deg
placed new nozzle/hotend
There is no difference with the old and new hotend. I used the atomic pull method with old nozzle/hotend and it came out clean.........
-
thanx for your comment it fixed my problem as well uploading custom firmware
yours,
Jesse
-
Hoi,
Thanx for de respons! Net de staté prikker ter hand genomen icm handmatig feeden. Ook de veerspanning in de bowden hoger gezet.
Het olien van de assen geeft idd verschil! Raar is alleen dat dat laatst ook nog gedaan is.... hebben jullie ook zo'n hoge interval hiervoor?
thnx
-
Hoi
Dank voor de posts hier boven, genoeg variabelen om uit te sluiten. Hier ervaren wij de zelfde problemen, al hoor ik veelal de feeder kleine retracts geven. Weet iemand of dit enkel een overload beveiliging voor de stappenmotor is???
Ik zit er nu over te denken om de retract in eenprint helemaal uit te schakelen (wat oozing zal vergroten). Heeft iemand hier ervaring mee?
Behalve de niet constante feed heeft er ook een x-as verschuiving van de print plaatsgevonden. Na 5 uur printen is langs de x-as extra weerstand ontstaan waardoor het printje een "Toren van Pizza" is geworden....
Ook ik gebruik enkel standaard fillament van UM, en mijn fillament is netjes 2.85mm rond. Laaghoogte was 0.2mm speed 60mm/s en 1mm shel icm 1.2mm top/bottem en 20% fill.
Alvast bedankt.
Jblok
Retract @ end of program clogs nozzle
in UltiMaker 3D printers
Posted
Hi Guys,
I adjusted the retract to the 12 mm, and uploaded the firmware to the UM2. This seems to help quite a bit..... When starting a new print the material starts flowing sooner, Still It has some trouble (a helping hand/push just before the feeder motor is sometimes needed) since it starts overloading the feeder on occasion.
yours