Jump to content

gromit

Dormant
 View Profile  See their activity

  • Posts

    16

  • Joined

  • Last visited

 Content Type 

Posts posted by gromit

    water soluble

    in Materials & profiles

    Posted · Edited by gromit

    Let me know how you get on.How it dissolves and how long it takes, and finish between AirWolf3D/ABS. As i said instead of printing in 2 3 4 parts ,then weld together.IF it works no more compromise on how it print and design things.

    Thanks Gromit

    water soluble

    in Materials & profiles

    Posted

    I have 2+ which work very well, Even though i am just a hobbyist ,i am always printing stuff .

    Look to invest in 3. I use ABS on most of my project ,Easy to weld together (c3h6o), and if want to change design part don't have to print the whole thing .

    SO can you use water-soluble with ABS/Nylon/est, OR rather what material are compatible with Water-soluble.I have looked at some videos,but looks like using PLA.

    If i could use water-soluble with ABS ,I would not have to compromise on design.

    Bed Temp Sensor ER02

    in UltiMaker 3D printers

    Posted

    I have error showing.

    ERROR sensor BED

     

    The problem is its is intermittent .

    I have re-solder connecting block on bed.

    Checked board connection .

    Tested for O/S wires from board to bed.

    I getting a reading of 109ohms resistor? on bed.

    I can get one print (first of the day) , try to print again some times OK some times fault.

    The printer has done several hundred hours

    Is it the board or bed?

     

    Ultimaker 2+

    I upgraded to + months ago

     

    thanks gromit

    5mm solid just one side of print

    in UltiMaker Cura

    Posted

    Hello all

    Please could anyone tell me how to print 5mm solid on just one side of a print.

    I have tried drawing it in 3D several different ways, leaving 5mm side not added to solid. Make up the 5mm in 5x 1mm sections. Drawing the model in 3D and the 5mm in 2d,I have tried fix horrible in different ways, just adds all together a shells the lot out. How can I make cura see it as a separate part? I have give up and gone on to anther project, but I would like to know how it’s done.

    Gromit

     

     

    Print just keep infilling with grid

    in Coffee corner

    Posted

    Hello all

    I have been trying to print a front panel for one of my projects,

    Just a flat plate with two raised pipes, both pipes have external tread 1mm pitch,

    The first pipe 20mm round with a hole (16mm) right the way trough, and that part prints fine, But the other pipe which is larger 60mm x 9mm high with a 53mm inner To a depth of 7 mm,Also a 10mm x 10 mm hole at the bottom ,Just fills up with grid. I have no grid turned on. I have redrawn the project over and over again. Each time using different technique

    Has any one got any idea please?

    Gromit

     

     

×
×
  • Create New...