Jump to content

VitR

Dormant
 View Profile  See their activity

  • Posts

    11

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Posts posted by VitR

    CURA on Ipad pro 2018.

    in UltiMaker Cura

    Posted

    Hi Ultimakers. 

    I have one question. In this moment I really thinking about move my workflow to ipad pro 2018. With using 3dshapr, umake xyz, forgerapp, bellus3d or Scandy pro may be full fusion 360 in future is possible create many models without using PC. But I can’t find full slicer which allows me generate gcode with full 3d print settings. Question is if ultimaker have plan make full cura for ipad? Thank you for answer. 

    Bad top layer on printcore 1

    in Improve your 3D prints

    Posted

    Hi, I mean green colour. My mistake. However printcore 1 is totaly new. Both feeders are clean. I know about abrasive materials but none was printed on my printer. I tried change change print order (green to PC2 purple to PC1) with same result. This mean that problem is not in printcore 1. I try increase final temperature and last layer looks better but still no ideal. Last idea what I have is that could be wrong something with belts bacause they are still original after more than 1 year old.
    Here are pictures where are show old prints (kingfisher) and today print (swallow).
    Swallow is not ideal. I'm clueless :(

    Photo 10-05-2018, 16 59 25.jpg

    Bad top layer on printcore 1

    in Improve your 3D prints

    Posted

    I using latest cura version. I try cura 3.1 with same results. All shells and printcores X/Y calibrate looks perfect. Problem is only on the top layer. Bottom layer looks perfect.

    I use only 0.4mm printcore and line thickness are set to defaults ?.  Part is only 1.5 mm high and I use 100% infill. I try set infill to 20 or 0 with same result.

    Neosanding looks like ironing in cura. I dont need ironing because my prints are little bit curvy with minimal thicknesses (0.8mm) and ironing have problem with this shapes.

    Bad top layer on printcore 1

    in Improve your 3D prints

    Posted

    Hi,

    I have problem with top layer on printcore 1.

    On the top layer I need perfect linetype surface (1 year without problem). But in last prints I have problems with big gaps between each lines (only on printcore 1)

    Firstly I try manual and auto leveling. Then I purchase new printcore, because this one is more than 1 year old. Still same problem.

    Please is here some ultimaker user which solve this same problem?

    File 07-05-2018, 14 54 44.jpeg

    Strange behavior during feeding new spool UM3

    in UltiMaker 3D printers

    Posted · Edited by Guest

    Hi all ultimakers,

    After updating to latest firmware on my UM3 I have small problem during changing material. During feeding new spool I hear that feeder make small gaps (motor is stoped for small time). This is happend only during feeding new spool and during first extruding new material to the nozzle (both slow moves). On both feederes. I think that is no big problem but something is no good.

    Have you any idea what is wrong?

    How to print CPE+ on UM3

    in Materials & profiles

    Posted

    Hi All,

    I need print very strong parts from materials such as CPE+ or PC. I know that UM3 not support CPE+ and PC for this moment. But I have few questions.

    1. Heating bed

    How UM3 can provide 110deg celsia which is recomended for printing this materials, when my UM3 can make only 100C? I use DIY door for closing print chamber.

    2.print core

    When I try print (transparent CPE+) on AA core, I have many carbonize parts on final result. Support from Ultimaker means that for this materials will be release completely new print core for this materials?

    If is only about trying find good settings for printing on current printcores I can try find him :)

    3.Date of release new cores

    are some information about releasing all new features for UM3? Printcores, Cura?

    Thanks for reply

×
×
  • Create New...