Jump to content

Gerd3000

Dormant
 View Profile  See their activity

  • Posts

    4

  • Joined

  • Last visited

Personal Information

  • 3D printer
    Ultimaker 3 (Ext)
  • Country
    DE
  • Industry
    Engineering

Gerd3000's Achievements

1

Reputation

  1. Gerd3000
    Hi. Did you find a sollution? I'm having the same issue.
  2. Gerd3000
    Was original UM PLA coming with the printer. I think I found the problem. I was also thinking of under extrusion. So I checked the feeder. Last week I had a clogged nozzel and the feeder had eaten away a lot of filament. So I had to disassemble the feeder to clean it. Made a little mistake at reassembling. I assembled the housing of the feeder in the way that the screw head of the screw that adjusts the force of the spring was outside the housing. So the force of the spring was very low. I will try again with correct force and report back. Thanks for your help.
  3. Gerd3000
    No, the print was fully attached to the print bed. No wrapping at all.
  4. Gerd3000
    Hello everyone, I had a little problem with a print. I wanted to print a rectangular cup 165 x 80 x 95 wallthickness 2.5 mm I'm using a Ultimaker 3 Extended and Cura 2.5 Material was PLA. I used standard Cura profil "Fast Print" with 20% infill and 7 mm brim. First 5 mm looked good: After that filament lost contact somehow and the printer printed the filament in the air creating what looks like a bird's nest: Here how it should look like: Does anyone have a hint for me?
×
×
  • Create New...