nobio8
Dormant-
Posts
23 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Everything posted by nobio8
-
Hi, I wonder why Cura 3.6 leaves gaps in the walls like in example bellow. I attached Cura Profile and file ASA profile.curaprofile CFFFP_Actual_0.5mm_thin_wall_20_mm_box.3mf
-
sorry for delay, I solved the problem by the following procedure 1. saved my Cura profiles and materials 2. removed all Cura installations 3. Reinstalled Cura 3,6 4. Imported back my Profiles Now it seems everything is just fine
-
smartavionics I sliced it again with your version of Cura and both Previews, Cura an Repetier's are the same no slicing error. I also imported my original GCODE (attached to my post) back to Cura 3.6 and preview shows errors correctlly. To summarise : 1. 3.6 sliced my model with errors which are not visible in Cura preview when slicing 2. If we preview GCODE in other slicers error is visible in all of them 3. If we import the same GCODE back to Cura 3.6, preview shows errors as all other slicers We have two problems: 1. Slicing with Cura has major errors 2. We can not relay on Cura to preview the code correctly unless we import the G Code back again
-
I prewied your GCODE in Repetier and it looks OK Then I used the same Cura 3.6 profile in Cura 2.5.1 and at firs glance Model is sliced correctly, so there must be something going on with 3.6
-
-
here it is Cura error.3mf
-
I printed Delta Calibration tool and the print has a Geometry error as seen from Picture of Repetier Preview (Red Arrow pointing at error) Cura shows Preview as it should be sliced. I attached GCODE, Cura profile and Repetier Preview DEltaCAl.gcode ASA 1.curaprofile
-
Hi, please find attached STL file Stringing_Test.stl
-
Hi smartavionics, it took me whole day to figure it out. It is a Bug. If I turn Combing Mode off, my model prints just fine.
-
Hi, I'm getting gaps in my prints, like one in the photo bellow. MAterial is ASA. I attached gcode and Cura Profile. What have I done wrong ? ASA profile.curaprofileretracto1565.gcode
-
than you smartavionics, so it behaves as expected, so one could combine two of them in certain scenarios
-
Hi, I just can't figure out the difference Initial Layer Line Width VS Initial Layer Flow. If I understand correctly, both just extrude more filament ? Am I correct ?
-
I just wanted to print 4 models with different Flow settings to set the Flow Settings. Any other option
-
-
latest Mac OSX, CURA 3.2.1. MacBook Pro Retina same Scrambled Text Issue, If I connect External Display no improvements so both Displays have the same Issue
-
-
I created new stl file, now tube has a wall of 0.8 mm thickness instead of 0.4 mm. This way we get 2 lines instead of 1 and I also added draft shield which has only one line. Strange extrusion problem is now gone and the result is in the photo bellow,  As one can see there is a gap at the point of direction change. How to eliminate the gap?
-
When I use Slic3r to generate gcode I get normal print
-
Hi, latest Cura 2.6.2 gives this result: Tube is 0.4 mm thick, layer 0.2 mm High, line with 0.4 mm I tried PLA, ABS, PETG Any suggestions ? Mario
-
Whay not? Usually saving a Project in any app means that when you return working on a particular project you star where you left off. What is than a purpose of saving a Project anyway ? Regards Mario
-
yesterday I saved a project with a ,lot of PostProcessing done with TweakAtZ Today I open the same projects an none of Postprocessing settings were saved I'm I doing something wrong or this doesn't work Mario
-
thank you
-
Hi, i just can't find a way to reduce speed for small, short perimeters in Cura like Simplify3d has. Reducing speed is necesary because filament is not cooled yet if perimeter is small . Any suggestions ? regards MArio