Tyokoi

Thank you very much for the help. The printer is now back on full operation. It is printing perfectly as before. It does have the little quirks such as not printing in the first try once in a while but it does print. It was something that was seen before I did the update so I’m still good with it. Thank you

Thank you very much ch for the instruction. I was able to successfully downgrade to 3.7.7. I will be trying to print in the next few days to see if it will print correctly. thank you.

Here is the missing file. https://we.tl/fRh2Cm6vIp Thank you

Here is the link for the files. https://we.tl/OMIIVfOM0w

Thank you for the link. Total of 4 files has been uploaded.

My apologies for the delay, I'm trying to attach the log but I'm getting an error that it cannot upload the file due to format. The file name I'm seeing from the USB is "ultimakersystem-ccbdd3003ed9.4.3.2.20180308.boot-2.log.gz". If you can recommend bypass, it is appreciated. Thank you

I’m having the same issues and have tried the factory reset with no improvement. I’ve then tried to downgrade but will not detect the firmware on the usb. Message says check for new firmware failed. This occurs in both stable and test firmware menu. I’ve tried to rename the file to match latest.tar.tar and latest.tar.xz.tar with no success on the out come. I’d appreciate any help or suggestions I can get. thank you