jimmieshear

Looks all good. Nothing in the way, no poop on the lens. Housing looks fine. One thing I can't find an answer to is how to check this elusive "Camera connected via usb" question I've seen come up in other threads. How do I make sure the physical connections are solid? I could tear the printer apart to figure that out, but if there's a nice document then that would be awesome ?

Ok, the machine was in the middle of a 5 day print when you asked for new logs ? Today I have em. This is after a reboot of the machine :: https://we.tl/QlX3cGh9qs

Had to wait for a print to finish (was a 3 day print). Here's the transferred logs. https://we.tl/c7MQx4q8C4

Blank screen from the "Monitor" tab in the App. From the web page when you to the view print jobs, and click the camera, it's a black square and no image. No errors no warnings. Just no image. iOS app shows a black screen and will time out after a moment with a camera icon and a line through it.

Curiously my camera has not been working since the last firmware update. So after some poking around I did a few things. 1) Does my Ultimaker 3 Extended have a IP address (yes) 2) Can I connect to it (yes) 3) Can I view the live stream using the http://<ip_address>:8080/?action=stream (no) 4) Can I view the snapshot of the camera at http://<ip_address>:8080/?action=snapshot (no) 5) Reset cura on the machine (done) Still can't see camera 6) Restart machine (done) didn't help I've also left the machine unpowered for a while (unplugged) and that didn't help either. Although I did have to re-associate the machine to the print group. I can't seem to connect to the camera from any of my PC's nor my iPad / iPhone. Ideas? ?