Jason_k

I also just got a print work; I did change some things; i added a top shield to protect any cold air drafts and also switched material from PLA to TPU95 because it had a lower temp. I need PLA for the print but I atleast did not get the error 4 times in a row

The error message that I am seeing is "PrintCore in head slot 1 is taking too long to warm up". All fans are running properly and all contacts are clean and straight. I will check the cable to see if that is installed properly. @CarloK My work has our zip files created at .7z as standard but the site wouldn't allow me to upload that type. i changed extension name but that obviously didn't work. attached is a properly created .zip file now. 2018-08-14.zip

any updates on this error message. i have had 3 prints fail consecutively with 3 different print cores, all the .4AA core. All at different times into the print, 3hrs, 8hrs and 16hrs of a 24hr print . silicone gasket is in good condition and installed properly, just changed it about 1 month ago. We print daily on this machine and never got the error message before these 3 last times. attached are the logs i got after the first print. 2018-08-14 THRU 8-16.zip