Hello, I'm trying to print ABS with my cr-10s and keep getting split problem. I'm using Cura 3.6.0, nozzle temperature at 250C, bed temp at 100C with layer height 0.1mm Extrusion speed is 20mm/s with 2 shells, 10% infill. Regardless of the print size, splitting happened. I think printing speed isn't that fast and the temperature is high enough. I didn't check the fan power but I didn't change default setting value of it. Please see attached images. https://photos.app.goo.gl/zz3fVsNpFcyMzBDd6 Any help would be appreciated!