Tamiimat

There is a Bug when using Z-Hop in a octoprint setup. Directly at start of the print job, the nozzle moving down to first layer height+Z-Hop. This however is at the position where the self added pre gcode to purge the nozzle has build his purge mountain. This results in the nozzle does pick up the extruded filament and carry it along to the start print position, which results mostly in a messed up first layer. Can this please fixed for next version ? G92 E0 G92 E0 G1 F1500 E-6.5 ;LAYER_COUNT:3 ;LAYER:0 M107 G1 F600 Z1.27 <---- this is the critical command, should not be there ;MESH:Schrift.stl G0 F4500 X34.523 Y91.873 Z1.27 ;TYPE:WALL-INNER G1 F600 Z0.27 G1 F1500 E0 G1 F2100 X34.324 Y92.763 E0.01351