TomB19
-
Posts
6 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by TomB19
-
-
I'm trying to print a small bellows. OD is about 20mm. It needs to allow articulation so I'm printing in TPU from a CURA slice with Spiralize. The bellows part of it works terrific but I can't get the top of it to complete. I have only tried without support, to this point. I could print this in PLA and get 10 good parts out of 10.
It seems like this could be a case of a poor choice of gemetry. I can modify the nozzle portion of this part but I thought I'd ask the group first.
I'm using an off-brand of filament (3d Sigma) that I have left over from another project but it's in a dry case and I don't suspect moisture problems.
Printer is a Creality CR-10S Pro.
Any TPU printing wisdom would be appreciated.
I've tried the following:
- Print speeds from 15 ~ 40 mm/s
- line thickness 0.4 to 0.7mm
- temps 215~225C
- I've made the nozzle angle as steep as 45 degrees (the pic shows a 40* version)
-
Thank you for the help, burtoogle. 🙂
I'm pretty confident the problem is with the font. A different font solved the problem.
I thought it might be Cura, since it slices fine with Slic3r.
I can see the errors you indicate. Thanks for showing me this technique. I will play with the mesh and see if I can get this font working.
Cura is awesome. I really appreciate this tool. Thanks to all who have worked on it. I've only sliced a few dozen things and already love it, compared to my old slicer.
I don't see a way to mark this "SOLVED". If anyone finds this with a search, check your font. Cura is functioning fine in this situation.
-
I've attached a sample of the problem. This object displays properly in Cura but the text is gone from the preview after slicing.
-
I should mention I'm using Manjaro Linux. Kernel 4.19.42.
-
I'm using FreeCad v0.18 and Cura 4.0.0. These tools are new to me.
I have a simple model that I want to emboss text onto. Cura displays the text but does not slice it. Slicing height is 0.15 so I set the text height at 0.45 but it still ignores it. The text size is pretty large and I've tried increasing the size and the height to ridiculous proportions.
I haven't been able to get MeshLab working to examine the mesh but I will continue working on it.
Still, Cura displays the mesh when I open the .obj (alias mesh) in Cura. The text looks perfect. When I slice and preview, the text goes away.
Any help would be appreciated! Thank you in advance.
- Tom
I'm looking for tips on Spiralize with TPU
in Improve your 3D prints
Posted
Quick follow-up.
This bellows doesn't move very often so I am thinking of using PETG as a backup, at 0.08 or 0.12 layer height with spiralize. I don't know how long it would last but it might be worth a shot.