Bpositivedotdk
-
Posts
8 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by Bpositivedotdk
-
-
Thanks for the reply. It is not because of minimum layer time. - I have adjustet this setting already and it would also show up in the preview.
If you look at the video, it is random speed changes. -
With some interlocking parts I needed to use the "horizontal expansion" to get a proper fit.
However there seems to be a bug in Cura 4.12.1.
The print time goes up quite a bit, for example 38 to 45m for just a expansion of 0.1mm.
Also it makes random speed changes when printing..... so what should be a constant speed of 60mm becomes some weird motion between 30 and 60!!You can see a video of it here:
https://www.dropbox.com/s/e8647584r5yheui/20211215_213829.mp4?dl=0 -
Hi. I think for some designs and models, it would be very neat to have the ability to have a random starting point, and still have the settings to hide that seam in a corner.
-
Okay so the problem is described here: https://github.com/Ultimaker/Cura/issues/8229
Still think the old solution was much better!!! -
In Cura 4.7.1 all my profiles went missing and I can't import them form 4.5. (It shows a dialog box "Successfully imported profile.....!" - But it does show up after!!!
... Also creating a new profile doesn't work!
-
11 hours ago, Torgeir said:
Wellcome in here Bpositivedotdk,
Sorry but you cannot use the old "original" feeder stepper motor (from an UM2) as a replacement for x or y axis.
This is because x and y axis use a 200 step/rev stepper motor and your old feeder stepper motor has 400 step/rev.
Thanks
Torgeir
Thanks Torgeir.
Oh that's too bad, guess I'll have to by a new one.
-
Can I use the original stepper motor from the feeder, in the y-axis?
(It's slightly longer, but should not be a problem!)
Spiralize, but with lined bottom layers?
in UltiMaker Cura
Posted
Yes, this is quite annoying - still happening in 5.1 beta!