RyanDavidson89
-
Posts
12 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by RyanDavidson89
-
-
On 7/20/2020 at 11:18 PM, ctbeke said:
Hi,
From the logging I think that somehow the network stack on the printer got confused and started reporting an invalid IP address. Usually this is fixed by restarting the printer or resetting the local data (in the settings menu).
Chris
Hi Chris,
Looks like the firmware update yesterday fixed it somehow.
Cheers
-
1
-
-
On 7/10/2020 at 7:25 PM, ctbeke said:
Hi,
Can you extract the printer logs to a USB drive and upload them here or share them with me privately?
Chris
-
When i press the "connect" button the the S5 LCD the button changes to the loading screen for less than half a second then changes back to "connect" without showing the code.
Weird thing is the first time i did this (when digital factory was first released) it worked and i was able to add the printer and print over cloud.
Thanks
-
On 7/7/2020 at 7:25 PM, nallath said:
Are you logged in? Did you try disabling the um3network plugin? Do you have the octoprint plugin? Did you use camera streams?
Hi Nallath,
Looks like that plugin was the issue. I left two instances of cura open overnight, one with the plugin disabled and that one is working fine but the otherone is using a lot of resources again.
Any fix for this at the moment?
Cheers
-
13 hours ago, nallath said:
Are you logged in? Did you try disabling the um3network plugin? Do you have the octoprint plugin? Did you use camera streams?
Was not logged in for this one, but have in the past with same issue. Not using octoprint, but do access webcam through cura connect.
Ill try disabling the network plugin and see how it goes.
-
11 hours ago, nallath said:
What version of Cura is that?
4.6.1
-
Hi,
Ive had this issue on a few version and multiple PC's that Cura seems to keep increasing the resources until its unusable and need to be reopened.
I've attached pictures of the task manager of when its first opened and then after about a day. After a few hours its noticibly sluggish.
Even after an hour of been open its from from the 0.3% CPU usage to 3%.
Any ideas on how to fix this?
PC im currently using:
i7-6700
32gb ram
quadro p4000 gfx card
Cheers
-
Hi,
My material usage chart in connect analytics seems to be wrong. Its only displayin two materials (both PLA) but when i hover over one the popup says CFF PA. Its also missing all of the other materials i have used that you can see in the Print job configuration chart.
Anyone know of a fix? I have reset my cura connect and still have the same issue.
Cheers
-
9 hours ago, SandervG said:
Hi, welcome to the community. Not that I know of.
It is not in the scope of functionalities for the Material Station. A switch between different materials would significantly increase the print time and we just don't think that is feasible or desirable by anyone. What would you like to use that functionality for?
Hi, thanks for the quick reply.
It was mostly out of curiosity, but i could see if been useful if you wanted to print a multi material or multi colour part and still use PVA support. I agree that with the current nozzle purge routine it will add too much time to a print.
Cheers
-
Sorry if ive missed a post on this, but is there anything in the works to be able to print something using more than two of the filaments from the material station, similar to the prusa MMU?
-
Also having this issue, trying to spend as little time at work as possible at the moment. So not been able to monitor prints from home as the webcam stops working after 30minutes is a pain!
Cura gets slower the longer its open
in UltiMaker Cura
Posted
Hi @nallath, im still getting the gradual slow down of cura when the um3 network plugin is active. Is there any fix for this, as i need it to send prints to my s5?
Cheers