Robert_JK

Thats correct, mixing nozzle indeed. I found the different temperature settings in the materials tab! I think this should work, didn't test it yet, but I trust this solves the problem. Thanks 🙂

Hi all, No one seems to be able to help with the questions I have regarding Cura and my 3D printer, so I turn to you, hopefully you guys can help out. I'm using Cura as a slicer for my Creality CR-X dual extruder. Since Cura software supports this printer I though it would be ok to ask questions here. Every time I'm slicing a model with dual extrusion mode on, the nozzle is dropping it's temp on de switch of materials for a few seconds. This gives a few issues so I would like to find a setting where it doesn't change the temp. I created costumes materials in Cura, got the setting for both extruders the same. So I thought I've done al there is able to do in Cura. Maybe someone can help. I've attached the Cura and gcode file. And also a screenshot of the gcode where you can see that the temp is dropping from 200 to 190 for a small periode. Thanks in advance, Robert RVS noord.gcode RVS noord.3mf