joelbrande

He Ulrichc, Thank you for the information and the nice picture 😄.

So I tightened the 4 bolts a little bit on the printhead. It reduced the play in the printhead allot in the Y-axis direction. This is my first printer so i'm not sure if i made things better or worse. Anyone else ever had to tighten these? Guess the worst that could happen is that i screw up the bearings.

Hello, I recently noticed allot of wiggle in the printhead on the Y-axis. Is this normal? It looks like the printhead is connected with 4 bolts (see picture). I checked the manual to look if there are any specification how tight the bolts need to be in Nm. But I couldn't find any reference.