EggFriedCheese

@GregValiant See video showing the first layer still printing way higher than 20mm/s

I will try this Greg and come back with my results!

No, the bed /extruder is moving significantly faster than the file in cura. I have already flashed the firmware again onto the printer, however, this has made 0 difference in the speed of the print (in that its way too quick, and then pulls the print off the bed)

This was streamed on twitch, and I do not save VOD's from that stream, due to them lasting so long and eating space. I can provide a video if it helps later on today.

I have attached the project file that was sent to the printer. The printer is printing at like 100mm/s on the first layer, which just doesn't stick, and just gets pulled off the printer. Slowing the first layer down to 15mm/s seems to make it stick better, but it was working at the settings in the attached project file. CE3E3V2_FlexiCura.3mf

Anyone?

Hey guys Been having a MAJOR issue tonight, after printing a select number of files on my Ender 3 printer, the printer and ALL g-code files sent to it, are ignoring the first "slower layers", and seems to be printing the first layer at around 100mm/s. After re-installing Cura, checking all of the settings on the slicer (Nothing has changed from previous), nothing seems to be out of the ordinary. I have attached screenshots of Cura, and have attached a Gcode, if someone can decode what's going on, you'd be amazing. Eggy CE3E3V2_Medium-Flexy.gcode