Schmordan
-
Posts
56 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by Schmordan
-
-
I'm a bit confused as well. I used Support Interface and when switching layers between the layer the support is printed and the one before, there was a one layer gap between the print and the support.
-
I'm printing with an Ender 3 and when printing, after about 40 minutes, it starts to make a thudding noise and layer shifts. I'm suspecting that the thudding noise is from the friction between the nozzle and the print or it's the printer X and Y axis moving really quickly, but I'm not sure. I'm a bit new to 3D printing, but I've printed things way bigger than this and it works. I also kinda want to avoid modding or changing any parts on the mother board.
-
Thanks for replying, I printed this model and it worked just fine! I think it's just an issue with Cura's layer preview.
-
1
-
-
These are the support settings I've used for things like toys and helmets, but doesn't work with the model i'm trying to print.
-
I'm a bit new to 3D printing and have printed a few things but I'm having an issue where when generating supports, the support itself is not touching the model i'm trying to print. I've tried settings like 'Z overrides X/Y' and changing Support Z Distance, but nothing seems to work. I'm using Cura 5.2.2 Plz help
the model I'm trying to print:
3D Printer Makes a Loud 'Thudding' noise and then Layer Shifts
in Improve your 3D prints
Posted · Edited by Schmordan
Thanks for responding! I usually print at 100 mm/sec and have a jerk setting of 30 for each one (but that's just personal preference) and have previously changed the extruder and bed springs. i'll try turning on acceleration control and test on the model again. I've tried most of the things you've mentioned, but not the acceleration control setting.