vwharr1s

Apologies for double posting I’ll try 4.13 and let you know how I get on. I should of added to one my previous posts in here to get a reply I’ll remember that for future reference it’s just driving me mad as I had a perfectly working slicer and printer and it’s so frustrating now it’s not right and I really want to start printing again thanks for your advice will have ago tomorrow evening when I can get in the office 👍🏻👍🏻👍🏻

I would really like help from Ultimaker to get cura ( and older version ) working on my mac still no further forward despite asking on here before as of yet I've to find an answer odr someone who can really help . It all Started when i had my mac reformatted as it had performance issues and i was advised this was a good thing to do ! it worked the performance issues disappeared and my Mac was like new ! thing was i never backed up cura as ii thought that id simply be able to download it again and carry on with the printer settings that i had saved from the previous version that i was using 4.6. This has proven to be Very hard as of yet I've not been able to get it working its won't even open on my mac the app just bounces up and down on the start up bar ! ! I've tried the latest version of cura but my prints aren't coming out any where near the quality they did when i was using the older version if anyone could help it would be much appreciated i have a printer waiting to print stuff but currently can't Many Thanks Mark

I’ll take a pic from the other end of the room and you’ll see it’s not as bad as it looks 😂😂😂 and yes it’s usually that easy with a Mac but for whatever reason I can’t get it to load. I’ll look again too see if there’s a way to force it to load 👍🏻👍🏻👍🏻

Thanks for the reply👍🏻👍🏻👍🏻 Ive tried to download and install the older version but that hasn’t been successful as I have a Mac it won’t let me 🤦🏼🤦🏼🤦🏼 I can upload some files if I can figure that out last time I failed miserably 😂😂😂 and I have a (please don’t judge) ender 3 pro with quite a few upgrades it has the BLV kit dual z kit CR touch direct drive upgraded hot end and it’s running cheetah 5.0 marlin firmware

Here’s some pics I know there not the same part the clamp style part was one of the last I printed before I had the trouble with my Mac the part with HT on it is the only part I e tried after slicing with the newest cura

guys i really could do with some help After my last post and you guys being so helpful in resolving a problem with my prints Im here again. I used to have Cura 4.6. and had it dialled in and was getting good consistent prints from my modded ender 3 pro. i had some problems with my mac which led to it being reformatted and i lost Cura ( completely overlooked this and boy do i regret it) anyway id dint think it would be a problem as i could just download the older version which i was running. Well that didn't work ! ! ! ! I ended up up with the latest version and now my prints are well not great... thing is once id got the old version sorted id rarely touch it as there was no need to and it was such a long time ago since i set it all up and dialled it in im not sure where to start as I've forgotten all that id learnt before. ( yes i should of made notes ) anyway im reply hopping that some of you guys can help ill attach some pictures for you all to see the difference between old and new.. 👍 thanks in advance Mark.

Not sure why but when I go to file and save project it doesn’t give me the option to generate a special file. im using it on a Mac not sure if its different ? ? ?

thanks for all the help guys this has resolved the issue I had now on to getting the print quality I had before. so I might be back with more questions thanks again 👍🏻👍🏻👍🏻😂👍🏻👍🏻👍🏻🥰

I’ll try that out later thanks 🙏🏻

Apologies Ive not had to do this before so im unfamiliar with how to save as a project if you can advise me on how to I will thank you for all your help it’s much appreciated. I thought I had tried the print thin walls I’ll take another look and see probably just me and user error 😂😂 I’ve kept using an older version as it was working perfectly and avoided updating to the latest version for this very reason 🤦🏼🤦🏼🤦🏼 hopefully we will be able to sort it so I can get printing again thanks 👍🏻👍🏻👍🏻

ok so i think I've managed to share the project here

CE3PRO_20mm Wall Pate.3mf

Thanks I’ll take a look later when I’m back on the computer 👍🏻👍🏻👍🏻

I can do but didn’t know I could how do I share it ? ?