Hi
I used this great program several years ago and now I am again giving 3d printing a go. But I need some customization.
my printer (Creality CR-10S5) is incredibly slow at heating, thus I would like to speed up the heating process by doing things in parallel.
But this does not work as I cannot edit the code Cura sends BEFORE the printer specific code.
any way to change the start up code from cura?
like:
set bed temperature, no wait
set extruder temp, no wait
home
Z up 5 cm
set extruder temp WAIT
maybe introduce some wait cycles so both bed and extruder are ready more or less at the same time.
thank you very
here you can see, that the problem is the code generated by cura by some secret magic ;)
;FLAVOR:Marlin
;TIME:237
;Filament used: 0.113383m
;Layer height: 0.2
;MINX:39.984
;MINY:52.189
;MINZ:0.2
;MAXX:461.984
;MAXY:474.189
;MAXZ:0.4
;TARGET_MACHINE.NAME:Creality CR-10S5
;Generated with Cura_SteamEngine 5.6.0
M140 S50
M105
M190 S50
M104 S200
M105
M109 S200
M82 ;absolute extrusion mode
M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration
M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate
M204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration
M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk
M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate
G28 ;Home
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
And this is the default start G-code of my printer, it comes AFTER cura heated everything up.
M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration
M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate
M204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration
M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk
M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate
G28 ;Home
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up