Homing in dual extrusion.

[vikas_gupta 0]

Hi, I am using cura 2.6.2 and 2.7 in dual extruder. I have a question. I have seen some videos, where whenever nozzles swap (means between nozzles 1 pauses and nozzles 2 starts), print head goes to home position or away from print. Is there any setting or option that I should enable in cura for that? I am frustrated with oozing problem. Thanks in advance.

[Nicolinux 288]

Which printer do you use? Depending of the printer type, the gcode type has to be set in Cura.

[vikas_gupta 0]

Which printer do you use? Depending of the printer type, the gcode type has to be set in Cura.

Thanks Nicolinux for replying.

I have XY-Z configuration printer with core xy. Two e3d hotends. Bowden extruder.