UMS3 - small gaps / zits and blobs

[Xhoax 4]

The viber statues we print have zits/blobs on the surface.

It seems like its the transition from the support to the wall surface.

On the last photo you also see the stringing from the support to the outer wall.

 

Is this an overextrusion problem?

How we can improve this?

 

Printer: UM S3

software CURA 5.6.0

material: VIBERS  Colorfabb

nozzle: 0.6AA

layer height: 0.12

print temp: 200

bed temp: 20

flow: 103

Print speeds + infill: 50

print speeds all wall speeds: 30

 

 

 

 

Edited September 12 by Xhoax