fritz99
-
Posts
33 -
Joined
-
Last visited
Never
Content Type
Forums
Events
3D Prints
Posts posted by fritz99
-
-
Hello !
When i print a object the surface is not completely covered.
There are a few small gaps between the printing lines.
What can I modify so that the surface gets completely flat and covered ?
please help.
Fritz
-
in Cura.
File
Preferences
Steps per E.
Increase that number to increase FLOW.
Ian
Sorry but thank you.
I need it in netfabb.
Fritz
-
Hello !
My ultimaker and netfabb is working good.
But there should be a littel more material coming out of the extruder.
How can I tune the amount of material that is coming out of the extruder ?
Fritz
-
Hello !
I connect to the ultimaker and can mually control all functions.
Then I create the toolpath and start printing.
The platform lowers for 10 mm and then nothing happens any more.
What am I making wrong ?
Please help.
Fritz
-
Hello !
With the Cura printerinterface I can load a file connect and move the machine manually.
When I want to start print, Cura connects, and outputs on the console
T:243 E:0 W:?
and does nothing.
What is wrong ?
Fritz
-
Hello !
My printer is working with Raplikatorg.
But the motor for the material feed is turning much too fast.
I do not find were I can define the speed.
Please help.
Fritz
-
Hello !
I have MArlin on the printer.
When I start the Replicatorg I cannot find a machine driver for MArlin.
Which driver do I have to select to make a connection ?
Fritz
Big problem with hose around the filament
in UltiMaker 3D printers
Posted
Hello !
I have very big problems with the hose.
It always is driven out of the printing head.
This seems to be a general big problem with the machine.
Is there a real solution for this problem ?
Fritz