Hello everybody i have a problem with the new version of cura 13.11.2 it add a random movement of the z axis at the end of the gcode and also add some random retraction both after the comando M107 and before the end gcode
I check my profile and try restoring the default settings importing the old profile creating a new profile i check with differents stl files and all with the same issue
as example the calibration cube 20X20 at the end add this
Cura 13.11.2
G0 F7200 X80.65 Y85.91
G1 F4800 X80.91 Y85.65 E266.81007
M107
G1 F2400 E259.81007
G0 F7200 X80.91 Y85.65 Z15.00
M104 S0
M140 S0 ;heated bed heater off
G91 ;relative positioning
G1 E-7 F300 ;Retract 4 mm
G28 X0 F7200 ;move X to min endstop
G1 Y195 F7200 ; move Y to max position
M84 ;steppers off
G90 ;absolute positioning
G92 E0 ; reset extrusion distance
and if i slice the same file with the same parameter in cura 13.06.4 i get the gcode without the error
Cura 13.06.4
G0 F7200 X99.07 Y104.35
G1 F4800 X99.35 Y104.07 E247.80150
M107
M104 S0
M140 S0 ;heated bed heater off
G91 ;relative positioning
G1 E-7 F300 ;Retract 4 mm
G28 X0 F7200 ;move X to min endstop
G1 Y195 F7200 ; move Y to max position
M84 ;steppers off
G90 ;absolute positioning
G92 E0 ; reset extrusion distance
I leave you the links of my gcodes (cura 13.06.4 and 13.11.2) and also my profiles
thanks in advance
http://www.mediafire.com/view/9e2ku89qz1lz681/Cube%20Cura%2013.11.2.gcode
http://www.mediafire.com/view/xs97o05umx9220i/Cube%20Cura%2013.06.4.gcode
http://www.mediafire.com/view/40b497ubalb2z02/Prusa%20i3%20Cura%2013.11.2.ini
http://www.mediafire.com/view/38bz41ph29c7php/Prusa%20i3%20Cura%2013.06.4.ini