-
Posts
306 -
Joined
-
Last visited
-
Days Won
2
Content Type
Forums
Events
3D Prints
Posts posted by 00D00B
-
-
Ta roue dentée est en bon état ? Ça semble cyclique quand même comme sous extrusion...
Je penche aussi peut-être pour une déformation des axes
-
Je me demande si l'on ne peut quand même pas prendre le temps de "reverse" le truc afin d'en modéliser un.
En fin de compte reste juste à voir le nombre de roues dentées et le nombre de dents puis à partir de là à part changer le sens de rotation du moteur pour l'extrusion et le nombre de pas on a bouclé le truc !
Manque juste l'étiquette "+" à mettre sur la façade 8)
-
Enfin faut quand même avouer que les barres d'axe ont quand même un intérêt aussi !
Elles en viennent à flécher un peu...
-
Hi,
What version of Cura do you use ?
-
What filament do you print ? ABS I guess ?
-
That is a very good one indeed! One of my favorites too.
Next to 'stroopwafel'.
Anyway, I won't hijack the thread any longer!
Hopefully, we'll see you all at the Ultimaker Session in Paris!
So bring some stroopwafel or Pindakaas
-
Buse Olsson du coup je présume
-
Donc tu as deux feeder UM2+ et la deuxieme tête est fixe ?
J'allais poser la même question !
Alors alors ?
-
C'est dans la newsletter #110 lisible en ligne ici !
-
Donc en théorie tu peux commander toutes les pièces une à une et en refaire un sans pour autant que ce soit vendu en tant que kit ? :B
-
Ahah sans blague !
-
Ultimaker lance le premier UltiEvent en dehors des Pays-Bas et c'est la France qui a droit au premier du genre !
Au cas où vous n'auriez pas encore reçu de mail de la part de Makershop à ce sujet, ça se passe le 5 juillet au Fablab de l'usineIO à Paris.
Petite question : vous y venez ? (:
-
J'ai envoyé un message comme indiqué par @MakershopFR dans son post ce matin...
Plus qu'à patienter !
-
Considering the Z0 is the bottom, you should just make a G28 (or G28 XYZ, that's the same).
Did you try it ?
-
Hi Lance,
When you have your model in Cura, just click on it to make appear the XYZ axes (Red, Green, Blue) and then keep clicking on Z axis and slide it down.
That's not as much precise as it could be before but in the down right angle you can see the "new" size of your object.
Tell me if you need more info ! (:
-
Hi,
Please give us the profile you use by saving it in ".ini." file.
Then, we would be able to open it and check it out !
-
Te voilà de nouveau opérationnel alors !
Lance quelques impressions de test pour être sûr
-
Hi,
Does anyone know a plugin for cura (15.04) to automaticly calculate the total printing volume ?
Thanks !
-
1004 hPa ce matin et grand soleil !
Merci Google ! ahah
-
I don't like the Raise 3D feeder. If filament gets stuck inside or broken then they provide you with a metal rod to push it out. Problem is the metal rod scratched up the sides of the feeder and the owner said that the nozzle blocked up with shavings from the feeder parts that came from the scratches.
Yes, sounds logic. Crappy thing...
What could we do about the calibration stuff ? Changings rods and put some nuts maybe ?
-
I'm pretty intrested too, I think I'll try one very soon to get an idea about it.
I don't really like the feeder system. But I saw Bondtech has developed one for this machine so this could maybe become even better then
-
Bonjour Nicolas,
Tu peux passer par le forum français, ce sera peut-être plus simple (:
Qu'est-ce que tu installes comme firmware ?
-
Hi,
This problem is due to your saving quality in your CAD software.
You can limit the polygon number and by this way you have a model like this one, with "plate" angles.
So just save it in higher res !
-
@Ash pense quand même à essayer d'enregistrer tes fichiers dans une meilleure résolution, en effet tu peux voir que tes pièces ne sont pas parfaitement rondes, elles sont facetées.
C'est dommage d'avoir de belles pièces au niveau des impressions sans pour autant avoir très exactement ce que tu voulais visuellement (:
At firmware stage for my um2 build but need some help....
in UltiMaker Cura
Posted
Normally if it's really an UltiBoard and it's recognized as it by your computer ( I mean your COM port is well displayed), you should be able to just go to Cura and then click on "Machine" menu in the top and "install default firmware".
This should take the UM marlin firmware file from CURA repertory and inject it right to the mobo