rsghowellnj

I am in the same exact situation and that is why I was truly hoping for an upgrade path as Ultimaker provided others to go from the Ultimaker 2 to the Ultimaker 2+. I too made a serious investment in the Ultimaker 2+ and have not used it many times and would have like to see me be able to maintain my investment. Please Ultimaker reconsider and offer an upgrade option.

Does anyone know if there will be an upgrade package to upgrade my Ultimaker 2+ to an Ultimaker 3?

Ultimaker 2+: When I go to print, there is a period of time when the heatbed will heat up before the printing actually starts. During this process, I get a high pitch alarm noise that lasts for about 15-30 seconds and then stops. Does anyone know what that is indicating?

Being that this thing is so expensive and can't find it anywhere except at Dynamism I want to get a spare in case they stop carrying this thing. Printing my first ABS from last night. No odor at all and temps inside are maintained perfectly. So far I'm impressed. I will post the link here as to where to get the filter from Dynamism as soo as I can find it. Thanks!

Thank you for the feedback! I'm taking delivery of mine today. They talk about replacement HEPA Filters. Do you know where we get these from?

Labern .... thank you for confirming that this is an aftermarket product.

Has anyone heard of this new Cover Kit for the Ultimaker 2 and Ultimaker 2+. I have it on order from my local reseller but didn't see it on the Ultimaker official website. I'm wondering if this is an after market piece. Link to Reseller's Site.

Yes I was able to obtain from a reseller. Thanks

Robert, Thank you for the part number. That helps me allot! Rich Ugh. The spool holder I made broke. It is way too fragile. Trying another author. I'm really hoping Ultimaker still stocks part # 1158. Does Ultimaker ever join this blog for comment?

Robert, Thank you for the part number. That helps me allot! Rich

Robert, I'm located in the USA. The resellers that I have asked told me to reach out to Ultimaker. Would you know of any resellers that would sell me this piece? My reseller said he does not have a part number for such a piece so he couldn't order one if I wanted it. I sure wished I could find someone that would sell me this item.

Robert, I'm located in the USA. The resellers that I have asked told me to reach out to Ultimaker. Would you know of any resellers that would sell me this piece?

I have started to use a filament that comes on spools that the spool hole is 3/4" deeper. Therefore they will not fit on the standard spool holder that is delivered with the Ultimaker 2+. I was able to find a 70mm Spool Holder to print and it works perfectly but did not print so well. Fortunately I don't have to look at it because it is behind the printer. Does anyone know if Ultimaker makes other Spool Holders that are 70mm deep that can be purchased?

Okay now I feel really foolish and need some help. I JUST received my Ultimaker 2+ and printing PLA directly on the glass bed. I was not aware of using Kapton Tape. Am I going to have troubles removing my finished print from the glass? What is the best way to remove it now that I messed up and printed directly onto the glass? In the future should I be using Kapton tape when printing PLA on my Ultimaker 2+? Feeling very foolish Rich