[PVA not sticking]

what combination are you using? PLA and PVA?

 

i am trying to get ABS en PVA,

initial the start-up was not sticking, but also the PLA is getting seperated from the PVA as well.,

[hood over ultimaker3 / temp controll]

has anybody made already a hood over the Ultimaker3 and a door to get a better temprature controll?

[PVA not sticking]

good morning all

anybody got any advise on following;

working on the 1st trials and trying to get to understand all settings.

PVA on 220°, Bed on 80°, glas plate clean and spraid with 3dlac

Problem the 1st bid of the print is not sticking to the bed

any sugestions are welcom.

thanks

[ultimaker 3 connect to secure wifi network]

Can you try with your phone?

 

thanks, but the idear on the network is to send files and to use the camera at the off-hourse printing,

The mobile option does not add any fjnction as i see it now.

[ultimaker 3 connect to secure wifi network]

dear neotko

i might been not clear, no this link is not the solution at all.

with my windows 7 i don't get a pop-up and even if i ask to look for a new network, it will not give a connection.

the question is, how to link the printer to the excisting network

[ultimaker 3 connect to secure wifi network]

can anybody tell me how to add the ultimaker 3 to an excisting wifi network?

the wifi setup gives a hotpoint, but i can't find that on my win7 network connectors

we did ask the vendor of the machine,but got no reply

[internal dimentions are wrong]

Hello

Anybody who can advice me.

outside dimentions are correct, but the inside dimentions of the holes are all too small.

the right bottom hole, should be 8 is 7.3

left keyhole should be 8x11, is 7.3x10.2

top keyhole should be 12x14, is 11.2x13.3

printed with the ultimaker 3